Honda Malaysia reports that the ongoing restrictions of the Full Movement Control Order (FMCO) have impacted its business significantly, with sales of new vehicles falling by 52% during the May to July 2021 (compared to the same period in 2020). In compliance with government orders, the Company has suspended its business operations. These include closures of showrooms, its marketing and sales office as well as the assembly plant in Pegoh, Melaka.
However, aftersales services are allowed to operate at selected authorised Honda dealerships nationwide. Conditions for operations are that only minimal manpower is allowed and appointments must be made in advance. The HondaTouch app provides an easy way to make an appointment. Standard Operating Procedures (SOPs) must also be observed and customers can only go to a service centre if it is within 10 kms of their home.
Showrooms cannot conduct business activities but selected authorised service centres (below) are permitted to provide aftersales support and emergency assistance.
Only 5,700 units sold in 3 months
“With only certain aftersales services allowed and sales and manufacturing operations halted, it is no surprise that sales have plunged. Honda Malaysia saw a decline of 52% in car sales for the year-on-year period of May to July 2021. We sold about 5,700 units in this period compared to close to 12,000 units sold in the same period last year when the country was under a Conditional Movement Control Order (CMCO) and then Recovery Movement Control Order (RMCO),” said Madoka Chujo, Honda Malaysia’s Managing Director and CEO.
She added that the company fully supports the Malaysian government’s efforts to curb the spread of COVID-19 by adhering to the restrictions. However, there is concern that a ‘domino effect’ is occurring on all 101 authorised dealers who face financial difficulties. There is the uncertainty of employment for sales and service advisors as well as other staff. The sales advisors, especially, have been severely affected as their income is largely dependent on commissions earned through vehicle sales.
Salespeople in car companies are especially affected since much of their income comes from commissions for new vehicle sales. Right now, they can’t do any selling activities as showrooms remain closed.
Helping Honda associates
“Honda Malaysia understands the hardship that the dealers and Honda associates are going through, and hence, the company is trying to do its best to assist them during the difficult times. One of the efforts is by registering Honda associates under the Public-Private Partnership Industrial COVID-19 Immunisation Programme (PIKAS) to expedite the country’s rate of vaccination,” she said.
The company targets to achieve 100% of first dose vaccination for all its associates by mid-August 2021. As Malaysia has one of the world’s fastest vaccination rates, the company hopes to achieve its vaccination target and subsequently the nationwide vaccination programme will help create a safer environment for Malaysians. “Honda Malaysia is appreciative of the hard work of all the frontliners who have been working tirelessly to help fight the pandemic,” Ms. Chujo added.
The Honda Malaysia assembly plant in Melaka is presently shut down in compliance with the FMCO.
Effect on local suppliers too
She also revealed that the prolonged business closure has impacted Honda Malaysia’s new model production due to no testing conducted in the manufacturing facility. Furthermore, the company’s supply chain and export of parts are also affected.
“The automotive industry supports a wide network of local components and parts suppliers that comprises a few tiers. These suppliers might not be able to sustain their operations and this will subsequently affect the overall supply chain. The current extended lockdown and no visibility on business resumption timeframe have impacted planning and overall investment of the automotive marques,” she explained.
Honda Malaysia hopes that early resumption of the automotive sector activities will be possible under strict SOPs and guidelines set by the government. This can avoid the long-term impact such as retrenchment of employees and can help to prevent potential business closures among the supply chain.
The Honda/Acura NSX is in its final year of production after having been launched in 2016 as the successor to the world’s first mass-produced car with an all-aluminium monocoque body. Like the first generation, which was produced from 1990 to 2005, the second generation also pushed the boundaries of engineering and sportscar dynamics.
The current NSX, made at Honda’s Performance Manufacturing Centre in the USA, was the first supercar to utilize three electric motors. It also introduced a number of industry firsts, including the first production 9-speed Dual Clutch Transmission (DCT) for a passenger automobile (and is still the only car having it).
First Type S officially sold outside Japan
As a prelude to the end of production by December 2022, Honda has announced that it will offer a NSX Type S version. Only 350 units will be available, of which 30 are reserved for the Japanese market and 300 for the US market. This is the first time that a Type S version is officially sold outside Japan and the first unit will be displayed at the Monterey Car Week event in California on August 12, 2021.
The NSX Type S is destined to join the ranks of unique and collectable first-generation NSX models. These are models such as the 1999 NSX Zanardi Edition (51 units produced) and JDM variants like the NSX-R (483 units produced between 1992 and 1995), NSX Type S (209 cars built between 1997 and 2001) and NSX Type S-Zero (no more than 30 produced between 1997 and 2001). To date, second-generation NSX sales total more than 4,000 units globally.
Unit No. 1 to be auctioned for charity
The first NSX Type S with VIN #001 will be sold to the highest bidder at a Mecum Auction’s Monterey event in California. All proceeds from the sale of the supercar will benefit charity, including an innovative STEAM (science, technology, engineering, art and math) education program for underserved youth nationwide in partnership with the Centre of Science and Industry (COSI).
The event, to be held on August 14, marks the return of the NSX to the auction scene. The first production version of the second-generation 2017 NSX was auctioned for a record US$1.2 million (about RM5.07 million) through the Barrett-Jackson auction house in January 2016.
While the NSX is celebrating its final year of production, Acura will continue to pursue sportscars in the electrified era. “Acura is a performance brand, a company of enthusiasts, and we will continue moving forward, actively investigating what the next generation of sports cars should be in an electrified era,” said Jon Ikeda, Vice-President and Acura Brand Officer.
In April this year, Honda announced that by 2040, it will sell only fully electric vehicles (not even hybrids), a bold move that will end its relationship with the internal combustion engine much loved by Soichiro Honda.
While different regions may move at different speeds along the road to electrification of their vehicles on a national basis, advanced markets like North America are likely to start having a higher proportion of electric vehicles (EVs) in the coming years.
New BEV series for North America
Honda will therefore be focussing on products for that market and has announced that it is working on a new series of high-volume battery electric vehicles (BEV) to introduce in North America in early 2024. The range will be known as PROLOGUE and will be led by an all-new SUV and herald the new electrified era for the company.
The carmaker already has a range of electrified vehicles on sale, but these are mostly with hybrid powertrains, apart from the Clarity which uses hydrogen fuel cell technology to generate electricity for powering the car.
In addition to the Prologue, the company will introduce an all-electric model under the Acura brand as well. Acura currently has hybrid models as well, including the 573-bhp NSX and the new all-electric model will be a SUV as well.
GM Ultium platform and battery pack (below).
GM’s Ultium platform for EVs to be used
Both the Honda and Acura vehicles will utilize the highly flexible global EV platform powered by Ultium batteries developed within the strategic partnership with General Motors. The platform will be engineered to support Honda’s driving character. As part of the agreement to jointly develop electric vehicles, Honda will incorporate GM’s OnStar safety and security services into its new SUVs, seamlessly integrating them with HondaLink.
Production of the SUVs will combine the development expertise of both companies, and they will be manufactured at GM plants in North America. In the second half of the decade, Honda also plans to launch a new series of EV models based on a new e:Architecture, with development led by the Japanese carmaker. These new models will be launched in North America first, followed by other regions.
Honda’s EV History
Though EVs have grown in prominence in recent times, Honda has been involved in developing and producing such vehicles for almost 25 years. In 1997, it introduced the EV Plus, a small electrically-powered hatchback which was the first BEV from a major automaker to use nickel-metal hydride batteries instead of heavy lead-acid batteries.
EV Plus was produced between 1997 and 1999.
After the limited production of the EV Plus, Honda came out with the Insight in 1999. This was one of the first volume-produced hybrids in the market. The FCX came out in 2002 and it was the industry’s first commercialised vehicle using fuel cell technology that was originally developed for the space program. The FCX was succeeded by the Clarity in 2017.
First generation of the Insight, one of the early volume-produced hybrids. This unit was driven from Thailand to Singapore in January 2001 to demonstrate the high fuel efficiency.FCX – the first hydrogen fuel cell vehicle (FCEV) which was commercialised.
“We know customers who have a good experience with a hybrid vehicle are more likely to buy a battery electric vehicle in the future,” said Dave Gardner, Executive Vice-President of American Honda. “Our strategy is focused on introducing a higher percentage of hybrids in core models in the near term, making a committed effort to achieve higher volume leading to the introduction of our Honda PROLOGUE.”
Almost 50 years ago, when the Honda Civic was born, it was only a hatchback, the sedan coming from the beginning of the 1980s. In Asian markets, the hatchback had a subordinate position to the more popular sedan and due to limited numbers being sold, it disappeared from Malaysia (officially) after a few generations.
In markets like North America, the hatchback was more appreciated and has been accounting for about 20% of Civic sales in the USA. Like the sedan, it evolved through the generations, gaining in size and performance. The 11th generation hatchback variant has now been revealed, joining the new Civic Sedan which was launched some months back, also in the USA.
Comparison between rear ends of the new Civic Hatchback (above) and the Sedan (below).
Same styling elements as latest Sedan
The overall styling follows that of the latest generation with a more dramatic roofline that gives a sleek coupe-like profile. While the front end has a similar form but a different grille (mesh with a slight concave shape) from the sedan, it is at the rear where the big differences are. There are larger side windows and a new small corner window in the C-pillar to enhance rearward visibility,
The roof line flows downwards to a lightweight composite hatch and the overall height of the car has been reduced by 50 mm by moving the hinge mechanism outwards. The design of the rear lights is different from the sedan’s and the third brake light lens spans nearly the entire width of its hatch, visually emphasizing the Hatchback’s wider rear track.
Longer wheelbase but shorter body
Compared to the 10th-generation Civic Hatchback, the windscreen pillars have been moved back by around 50 mm while the wheelbase is 35 mm longer and the rear track is 13 mm wider. However, the rear overhang is less which reduces the overall length by 124 mm but Honda says rear legroom is better in this new variant.
With the large opening at the back, additional attention was given to body rigidity. The Civic Hatchback’s structure has 19% better torsional rigidity versus the previous generation. The stiffer structure, with an aluminium front subframe, benefits ride, handling and refinement, with reductions in noise, vibration and harshness augmented with the extensive use of structural adhesives, spray-in foam in the pillars, and additional sound deadening in the firewall and under the floor.
The suspension is shared with the Sedan but Honda mentions chassis updates such as new low-drag front brake calipers, and low-friction front and rear wheel bearings to reduce rolling resistance.
Naturally-aspirated, turbo and hybrid powertrains
As with the current generation in many markets, there will be a choice of naturally aspirated and turbocharged engines, including the 1.5-litre turbo unit Malaysians are familiar with. A 6-speed manual transmission will be available and for the US market, the naturally aspirated engine has a 2-litre displacement. It’s coupled with a revised CVT that has a more robust electric hydraulic pump to reduce the load on the mechanical pump, and a ball-bearing secondary shaft to reduce friction.
The European market will get the Civic Hatchback with an e:HEV hybrid powertrain.
For the European and probably Japanese market, Honda will also put a e:HEV powertrain in the Civic Hatchback, the hybrid powertrain meeting the objective for all European mainstream models to have electrified powertrains by 2022.
Sedan functionality with hatchback versatility
Much of the interior is the same as the Sedan with the added layout versatility of a Hatchback adding 65% more cargo space. The standard 60:40 split backrests can be quickly folded for expanded capacity and the side-pull cargo cover provides concealment of items in the boot.
Up front, outward visibility is enhanced by the repositioned A-pillars, low bonnet, flat dashboard, low cowl and outside mirrors which are now mounted on the doors. The instrument panel is designed with a minimum of cutlines to reduce windscreen reflections and visual distractions, while the new metal honeycomb instrument panel accent hides the air vents.
Like all Hondas sold today, there is the Honda Sensing suite of active safety and driver-assistance technologies. The latest version installed in the Civic Hatchback uses a new single-camera system providing a longer, wider field of view than the previous radar-and-camera based system. Combined with software advances and a new, more powerful processor, the system is capable of more quickly and accurately identifying pedestrians, bicyclists and other vehicles, along with road lines and road signs.
Honda Sensing also includes Traffic Jam Assist, and the new camera-based system improves on existing functionality, such as more natural brake application and quicker reactions when using Adaptive Cruise Control (ACC). It also has more linear and natural steering action when using the Lane Keeping Assist System (LKAS). Low-Speed Braking Control is supported by and front and rear false-start prevention with the addition of eight sonar sensors.
Unlikely for Malaysia
Malaysia has long been a sedan market and while there were hatchbacks too, most faded away after the 1980s. Today, the lines are blurred between sedans and hatchbacks, the latter once defined by having a blunt rear end. But while Malaysian buyers may appreciate the extra versatility a hatchback offers, many will probably get a SUV instead as it may be perceived to be more suitable in different roles.
Early generations of the Civic Hatchback were sold in Malaysia but it was dropped from the locally-assembled range after the 1990s.
But beyond that point, there is also the question of potential volume and as Honda Malaysia is committed to assembling products locally with high localization of parts as well, the Civic Hatchback may not have the sort of numbers for a business case. It’s not only that the Malaysian market is not as large as Thailand and Indonesia but also that a huge chunk of the market is occupied by just two brands with strong advantages. The remaining part of the market has to be shared by around 20 makes and the ‘slices of the pie’ for each is therefore small and a variant like the Civic Hatchback won’t generate enough volume.
Visit www.honda.com.my to know more about the models available in Malaysia.
In many factories, one of the many practices where employees can be involved in improving processes or quality has been the suggestion system, for which they are rewarded if their ideas are adopted.
Honda also has a program called IGNITION which was started in 2017 by Honda R&D Co., Ltd., its research and development subsidiary. This is a business creation program where Honda employees can propose new business ideas and then implement the technologies, ideas or products to help solve societal problems and create new value for people.
Since being initiated, many applications have been received for new business ideas as well as numerous suggestions that fit with Honda’s business activities and are already being pushed internally towards commercialization.
Bringing new ideas to the market
There have also been proposals with added social value that can be implemented more quickly in the form of a start-up instead of being implemented within the Honda organization. In 2020, IGNITION was therefore expanded to include the option of bringing new business ideas to the market by setting up companies.
Ashirase system for visually impaired
The first company to emerge from the IGNITION program in this way is Ashirase Inc., which will develop an in-shoe navigation system to support the visually impaired while walking. The system, also called ‘Ashirase’, uses a smartphone app and 3-dimensional vibration device including a motion sensor, which is attached inside the shoe.
With the concept of ‘navigation which enables safety and a relaxed state of mind for the visually impaired’, Ashriase is being developed as a product which helps the users reach their destinations safely and have a more independent lifestyle.
The IGNITION program was originally for Honda R&D but is now expanded to the entire company for full-time employees in Japan to drive new business ideas. The ideas will not come from engineers but also of employees from other areas such as production, sales and even administration.
Ashirase system uses a smartphone app and 3-dimensional vibration device including a motion sensor, which is attached inside the shoe.
Evaluated from investor’s perspective
IGNITION works with a corporation that, as one of the jurors, evaluates the proposals from the perspective of an investor. In addition, applicants have access to advice and support from the corporation during the assessment process.
The decision on whether to market is made within 6 months and the marketing will be done by Honda itself or through the establishment of a start-up company. In order to preserve the independence of the start-up company, Honda’s equity stake is limited to a maximum of 20%.
“There are many employees at Honda who want to contribute to social development with their technologies and ideas. IGNITION is a program that promotes and develops these ideas and technologies among Honda employees and helps them create new values that contribute to solving societal problems,” explained the Head of the IGNITION Jury and Managing Officer of Honda Motor Co., Ltd., Yasuhide Mizuno (who was a former MD & CEO of Honda Malaysia).
“We are now expanding the program to all employees in Japan and offering them the additional option of starting their own business. The hurdles for starting a business are very high, but we hope that IGNITION will continue to drive the challenging spirit at Honda and enable us to create new products and experiences that go beyond our core business,” said Mr. Mizuno.
With a full lockdown Movement Control Order (MCO) to run from June 1 to June 14, 2021, many businesses are required to stop operations and these include car companies. In connection with this directive, Honda Malaysia has announced that its main business operations will remain closed for the period.
The business operations involved are the company’s assembly plant in Pegoh (Melaka), sales office and authorised dealer showrooms nationwide. However, aftersales services are permitted so owners can send their vehicles to authorised Honda service centres nationwide. Aftersales services available are preventive maintenance, Body and Paint (BP) and towing assistance.
Showrooms will be closed for 2 weeks (tentatively) but service centres will continue to operate.
Honda Malaysia encourages owners to use the HondaTouch application to make their appointments at the service centres. They should not just go to the service centres without a prior appointment as this will not be entertained so appointments must be made in advance. It should also be noted that there is a restriction on the range that they can travel which is 10 kms from their home, so they should locate the nearest authorised service centre.
All Honda dealerships strictly adhere to the Standard Operating Procedures (SOPs) specified by the health authorities for the safety of Honda customers and company associates as well as to provide customers peace of mind when visiting the dealerships.
Honda today gave the world its first look at the next generation of the BR-V, presented as the N7X Concept. The original BR-V had its world debut in Indonesia in August 2015, and now, for the first time, Honda is unveiling a concept car in the country. The reason is that the BR-V is a model that was developed primarily with the Indonesia market in mind, although it is also sold in some other countries, including Malaysia.
For the second generation, the 7-seater cabin is maintained, this being an important point for customers in Indonesia. Honda understands that a car is ‘not just a car’, and considering how much time people spend in it, the vehicle is also a ‘second home’. This led the design team at Honda Asia Pacific to combine the best features of a MPV and the advantages of a SUV for the N7X Concept that will be the basis for the forthcoming new BR-V.
Designed with Gen X in mind
The exterior design is sleeker than the current BR-V and the overall size appears larger. There are some styling elements from other models, such as the CR-V, with the high ground clearance being a necessity in Indonesia and also other parts of ASEAN.
Honda product planners conducted extensive studies, primarily in Indonesia, to find out what customers expect and aimed to exceed the expectations. They focussed especially on the Generation X family, which has a lifestyle that is balanced between personal activities and family togetherness.
Details of the interior are not available other than from brief views during the presentation. With words like ‘premium’ being used, it is likely that Honda will offer the new BR-V with a higher quality than before, the same way that the City evolved upwards. Of course, with the emphasis on safety, we may see better safety systems installed, probably including an autonomous braking capability.
Honda’s idea of a 7-seater
“The N7X is our concept of what a 7-seater car should be, which not only offers pleasant driving performance but also the serenity and comfort of a premium car for all occupants. We are very proud to make Indonesia the first in the world to introduce the N7X Concept, a concept that will redefine the categories of cars and driving pleasure,” said Takehiro Watanabe, President Director of PT Honda Prospect Motor, during the world premiere online.
The current BR-V was launched at the Indonesia International Auto Show in 2015 but given the current pandemic, the future of such public events remains uncertain. Nevertheless, Honda Indonesia is displaying the N7X Concept at a shopping mall in Jakarta this week, and will probably do an online launch of the production model sometime during the second half of this year.
2019 BR-V (the model received some updates last year). Prices start from RM86,726.
The BR-V arrived in Malaysia about 2 years after its debut in Indonesia, though this second generation might not take as long. Anyway, if you prefer the current one and want to get one before it runs out, visit any authorized Honda dealer and their locations can be found at www.honda.com.my.
It’s 2021 and just under 6 years from the time the 10th generation was introduced (in America), Honda has revealed a new generation of the Civic. With a history of almost 50 years, the 11th generation Civic continues the nameplate that was used for Honda’s first global car.
In designing the new Civic, Honda stylists and engineers revisited design concepts of previous generations, maintaining the brand’s original design approach of ‘Man-Maximum, Machine-Minimum’ (or ‘M/M’). Unlike the 10th generation which had a major design change from its predecessor, an evolutionary approach has been taken this time round for the 11th generation.
Subtle design changes
The body design is ‘thin and light’ with a low bonnet and front fenders, and the low horizontal beltline gives a low-slung look to the profile. Key to the new Civic’s styling was moving the bottom of the windscreen pillars further back rearward by 50 mm, which elongates its bonnet for a sleeker silhouette. This also visually connects the pillar to the front wheel hub, a subtle design element that emphasizes its wheels and tyres for a stable, planted stance.
Current 10th generation Civic (Malaysian market).
A low beltline with horizontal windowsills and door-mounted side mirrors improve visibility while maintaining the clean lines of the exterior. A sharp shoulder character line carves a gentle arc from the front fender to the taillights, giving continuity to the design. The lower character line carries up from the bottom of the front door, rising across the rear doors, and through the rear fenders for an enhanced sense of motion.
The additional stability provided by its new wider rear track is emphasized by stronger rear shoulders, wide-set taillights, and the upswept and aerodynamically efficient trailing edge of its bootlid. LEDs are used extensively for all the lighting units, offering benefits such as quick light-up time and longer life as well as low energy consumption.
Uncluttered cabin appearance
Inside, the M/M approach gives a simple, clean and modern look that is reminiscent of the early Civics. Back then, there were less electronic features so there was less ‘visual clutter’ and the interior designers have sought to replicate this for the latest model.
While the overall dimensions are not significantly changed (although the wheelbase has increased), which means the interior packaging continues to offer good head, leg, shoulder and hip room for all occupants. The sense of spaciousness is enhanced by the low, flat beltline and clean cabin layout, as well as the expansive view all round. The front seat design uses Honda’s Body Stabilizing Seat approach with a new-generation seat frame that firmly holds the body, enhancing comfort on long drives.
Further improving visibility is the top of the Civic’s instrument panel, which has been designed with minimum cutlines to reduce windscreen reflections and visual distractions. A striking metal honeycomb mesh accent stretches from door to door across the dashboard. It serves both form and function, creating a dramatic visual dividing line between the audio, information displays and climate controls, while the intricate flow-through design conceals the air vents for an uncluttered look.
High-quality materials are used throughout the interior, especially on touchpoints, with close attention paid to the operation of all switchgear and controls. Materials were also chosen with an eye toward practicality, such as the new premium centre console trim specifically designed to hide fingerprints and smudges to help maintain a high-end appearance.
Driver-focused technology
The instrument panel has become more high-tech with partial or full digital displays, depending on the variant. Top variants will have the Civic’s first all-digital LCD instrument display measuring 10.2 inches with a high-definition full-colour LCD panel. A ‘surprise-and-delight’ feature – the brake lights, headlights and turn signals of the displayed Civic vehicle image turn on and off when activated or deactivated.
For the North American market, where the new Civic will be manufactured at two locations, Honda is installing a Bose Premium Sound System for the first time (in the model). The system has been custom-engineered precisely for the best sound quality and reproduction in the Civic’s cabin. Expert audio engineers developed the Bose sound system with advanced components and technologies, working closely with Honda engineers to integrate the system early in the vehicle design process.
Stiffer body structure
The 11th-generation Civic body structure is said to be the most rigid in Civic history, with an 8% improvement in torsional rigidity and 13% improvement in bending rigidity versus the previous generation. This stiffer structure supports improvements in ride, handling and NVH.
As with other models, Honda’s Advanced Compatibility Engineering structure is designed to meet present and anticipated future collision standards while minimizing additional weight. This is achieved with the extensive use of lightweight materials, such as aluminium and various grades of high-strength steel, as well as an expanded application of structural adhesives. The new, stiffer body also reduces the transmission of road and wind noise to create a more relaxed driving environment.
Drivetrain choices
Engine choices will differ from region to region although the two 4-cylinder engines – a naturally aspirated 2.0-litre or a turbocharged 1.5-litre – are likely to continue to be offered for ASEAN versions. Both are paired with an updated CVT and are said to have improved fuel efficiency.
The suspension system has been tuned to take maximum advantage of the stiffer body structure and lengthened wheelbase for a smoother ride, while improving sporty handling. The front MacPherson struts have new low-friction ball joints and front damper mount bearings to improve steering feel and self-centering, and the spring and damper alignment has been optimized to minimize operational friction.
At the rear, the wider track enhances stability, with a new larger compliance bushing with an improved bushing axis to minimize harshness. Additionally, the two rear lower arms are equipped with a new bushing that reduces noise and vibration inside the cabin, while also promoting better straight-line stability and turn in. The electronic power steering has been re-tuned to provide better feedback and improved straight-line stability.
An all-new and lighter aluminium front subframe with an efficient truss and rib structure provides rigidity and stability. Additionally, a new lightweight flex tube in the exhaust system decreases noise transmission. The reduced suspension friction and improved bushings help reduce harsh road shock by 20%.
Advancing safety performance
New active and passive safety systems are available for the Civic and in a world’s first application, both driver and passenger frontal airbags are designed to more effectively reduce conditions associated with brain injury by better controlling head motions in certain types of crashes. These all-new airbag designs, offered in the US version, attempt to address the recently recognized issue of severe brain trauma associated with angled frontal collisions.
The Advanced Compatibility Engineering body structure in the new Civic has been enhanced for even better compatibility with larger vehicles. This includes improved occupant protection in angled frontal collisions, with a new upper A-pillar structure, side frame and lower firewall structure—all designed to route crash energy around the cabin. Side impact protection also has been improved, with stiffer structures in the roof, side sill and B-pillar, doors, and the rear wheel arch and C-pillar.
The new front driver’s airbag system in the Civic uses an innovative donut-shaped structure to cradle and hold the head to reduce rotation. The passenger-side front airbag uses a three-chamber design to achieve a similar result, with two outer chambers designed to cradle and control head rotation. It is also used in the new Acura TLX and MDX.
The standard Honda Sensing suite of active safety and driver assistive technologies uses a new single-camera system that provides a wider field of view than the previous radar+camera-based system. Combined with software advances and a new, more powerful processor, the system is also capable of more quickly and accurately identifying pedestrians, bicyclists and other vehicles, along with road lines and road signs.
The new camera-based system improves on existing functionality, such as more natural brake application and quicker reactions when using Adaptive Cruise Control. It also has more linear and natural steering action when using the Lane-Keeping Assist System. With the addition of 8 sonar sensors, the Civic will have, for the first time, Low-Speed Braking Control, and front and rear false-start prevention.
Pedestrian safety was not overlooked in the engineering of the new Civic. It has a new front bumper beam safety plate designed to decrease leg injuries and the bonnet incorporates an embossed inner structure designed to reduce injuries to the head if the pedestrian hits the bonnet.
Images and video of new Civic shown are of the US version. ASEAN version may differ in some areas and features.
New Civic for ASEAN
As has been the case for many generations now, the model revealed in America may not be identical to the one we will get in Malaysia. Honda designers consider preferences influenced by culture and make small changes here and there. However, the engineering would be largely similar since that part has been developed at great cost and to make too many modifications would be an unnecessary expense.
Every Civic generation has been assembled in Malaysia since the mid-1970s when the first generation was launched. It was the 100,000th unit (inclusive of other models) assembled at Honda Malaysia’s plant in Melaka in 2007.
As it takes up to a year for a new Honda model to be in Malaysian showrooms, this new Civic generation will probably appear in early 2022. When the model is launched in Thailand, then you can expect the Malaysian debut to occur within months. The only thing that may slow down the process is that the Civic is assembled locally at the Melaka plant, and Honda Malaysia tries to localise parts supply as much as possible. This is an extra step that adds time, instead of just getting all the parts in the pack from the main factory in Thailand.
Do you like the new Civic? If you prefer the current one and want to get one before stocks run out, you can locate an authorised dealer at www.honda.com.my.
A number of models are being recalled by Honda Malaysia to replace a fuel pump as a precautionary measure. This follows an announcement last year in connection with a global recall by the carmaker, with 55,354 units of Honda vehicles assembled in Malaysia in 2018 and 2019 being affected. Now, Honda Malaysia says that an additional 77,708 vehicles have also been added to the recall list. The latest models currently on sale are not affected.
The affected models added to the recall list are shown below:
The earlier recall list issued in June 2020.
No incidents reported so far
Honda Malaysia believes this recall is necessary as a preventive measure to address the possibility of difficulty in starting the engine, loss of engine power or vehicle stalling. So far, there are no incidences of crashes or injuries caused by this issue reported in Malaysia. However, as customer safety is Honda Malaysia’s top priority, the company will continue to uphold transparency and stringent controls for all its customers.
Owners of affected vehicles will be informed via notification letters which will include details of the recall. Owners can also check if their vehicle is affected in the fuel pump recall using the HondaTouch application or visit www.honda.com.my/productrecall.honda.com.my.
If you are not the original owner
It is possible that some owners may not receive notification letters as they are not the original owners whose details are on Honda Malaysia’s database. In this case, they can obtain assistance from an authorised Honda dealer to check on the status of their vehicle, or call Honda Malaysia’s Toll-Free number at 1-800-88-2020.
Honda Malaysia urges all affected owners to contact any authorised Honda dealer to make an appointment upon receipt of the notification to replace the fuel pump, subject to parts availability. The replacement of the affected fuel pump is free of charge and all costs related to this activity will be borne by Honda Malaysia.
