While attention in Malaysia is on the new Honda HR-V, another new model is capturing the attention of Honda fans in America – the new CR-V. Predictably, the company is starting the launch of the popular SUV in its bestselling market where, along with the Toyota RAV4, it created a new market segment almost overnight over 25 years ago.
While retaining the form of a traditional SUV, the new CR-V adopts the new design language with a large front grille. It’s almost 70 mm longer, with the A-pillar moved back 127 mm and 75 mm outwards. This is to improve forward visibility although, in an SUV, the driver already has a commanding view with the higher seating position than in a passenger car.
Focus on hybrid po
For the North American market, there will be two hybrid powertrains – one with a 1.5-litre turbocharged engine and the other with a 2-litre engine. Honda says the engines, which are also used in other models, have been refined and for the smaller engine, the 4-2 exhaust port cylinder head helps maintain peak power over a broader range of rpm.
The CVT has been updated to reduce noise and vibration with significant drivability and performance improvements include Step-Shift programming that simulates gear changes at full throttle. An updated Real Time AWD with Intelligent Control System improves traction management in slippery conditions and can now send up to 50% of engine torque to the rear wheels.
Civic-themed interior
Inside, the new interior layout has the most cabin and cargo space in CR-V history. While it has functionality, its styling theme is also similar to that of the latest Civic. Body Stabilizing Seats for the front occupants reduce fatigue and improve posture, while there are lots of mut-have tech features for the driver and passenger.
More advanced safety features
The 6th-generation CR-V also gets more advanced active and passive safety technology. This includes the latest version of Advanced Compatibility Engineering (ACE) architecture that has been enhanced for even better compatibility with larger vehicles.
First introduced on the new Civic, the new driver and passenger front airbags can minimize the potential for severe brain trauma associated with angled frontal collisions. The new front driver’s airbag uses an innovative donut-shaped structure to cradle and hold the head to reduce rotation. The passenger-side front airbag uses a 3-chamber design to achieve a similar result, with two outer chambers designed to cradle the head and minimize rotation.
Updated Honda SENSING safety and driver-assistive technology is installed, with a new camera and radar. The camera has a 90-degree field of view while the radar has a 120-degree field of view for maximum coverage of the area ahead.
The new CR-V shown here is for the North American market (where it is also manufactured) and the model which will eventually come to the ASEAN markets (probably in 2023) is likely to have cosmetic and technical differences to suit the region’s needs.
New Honda models almost always grab a lot of attention and the interest shown by the public actually translates into strong sales that remain constantly high. The HR-V is one such example; even from the time before the first generation was officially launched in Malaysia, it already drew crowds wherever it was displayed. And when it finally arrived in showrooms, even more orders flooded in and placed the crossover SUV in a leadership position in its segment.
After putting around 111,000 units on the road in 7½ years, it’s now time for a new generation and again, there has been the same strong interest that the first generation had. Prior to the launch today, one unit was sent around the country for exclusive previews at selected showrooms and drew a lot of potential customers.
Bookings were accepted from June 9 and with the sales tax exemption set to expire at the end of the month, many did not want to miss the opportunity to save money so they made their bookings right away. By today, Honda Malaysia has received more than 20,000 orders – more than 12 times the monthly sale target the company has set. As such, the waiting period will stretch to at least 12 months!
It’s been a while since a Honda model has had such a long waiting period, the last one in memory being the Accord back in the 1980s. However, the company is uncertain of the actual number that will be taken because there may be cancellations so it can only get an idea of the real demand after the July numbers are reviewed. Those who did book before June 30 will be entitled to the sales tax exemption and save money but for those who do want to get one, the following are the retail prices:
With the success of the first generation, coming up with the next generation must have proved to be a challenge. While maintaining the profile with a coupe-like fastback, the designers took the opportunity to use this generation change to also start introducing a new design language which is a total departure from the previous ‘wing’ theme.
The front appearance is bolder with a new and dominating grille design. As it is a big visual change, some may like it and some may not. But lack of enthusiasm for the new look is likely to fade away in time as it becomes more familiar. It is often the case that there are some designs which are not so well received when a new model is launched but eventually, the negative views diminish. In fact, a designer once said that he would be worried if a new design generated too much excitement at the start because there was a danger it could also become dated quickly. He preferred designs to ‘mature’ and gradually become more accepted amd appreciated over time.
New exterior features include front LED Sequential Turn Signals (the signals ‘move’ as the illuminate), and a full-width LED Taillight Strip which adds a visual signature visible from a distance. Other key exterior features include new LED headlights with DRLs, LED foglights and 18-inch alloy wheels.
Sizewise, the new HR-V measures 4385 mm in length, which is 39 mm longer than its predecessor. The 1790 mm width is similar to the previous RS version, while the roof is 15 mm closer to the road so the profile is more low-slung. The contemporary, uncluttered form has a crisp horizontal shoulderline running from the rear light cluster to the front headlights, generating a sense of forward momentum.
This time round, Honda Malaysia is offering a choice of three powertrains in four variants. There is no longer a 1.8-litre engine and all the powertrains have a 1.5-litre displacement. At the lower end is the HR-V 1.5S which has a 1.5-litre DOHC i-VTEC engine producing 121 ps/145 Nm. The other two variants – the E and V – have the widely used 1.5-litre turbocharged VTEC engine (shown below right) which produces up to 181 ps/240 Nm. The S, E and V variants all use a CVT delivering power to the front wheels.
The top variant, as before, is the HR-V RS which has e:HEV technology with the intelligent Multi-Mode Drive (i-MMD) system. Already available in the City RS, this 1.5-litre hybrid powertrain with 2 motors (above left) generates 131 ps with an impressive 253 Nm of torque. From our experience with its in the City RS, it not only delivers strong performance but can also be very economical because it can run on just the electric motor for short distances, meaning no petrol is used at all. And as the battery pack recharges while driving, the e:HEV approach is the best one for Malaysia at this time, rather than moving to full electric vehicles so quickly.
Honda e:HEV powertrain
Compared to the e:HEV powertrain in the City RS, the one in the new HR-V has received improvements to increase performance. The battery pack in the Intelligent Power Unit has 60 cells, 25% more than the one in the City RS, so storage capacity is greater. The system also generates 20% more power and the CVT has a lower ratio, probably to suit the higher weight of the HR-V.
The chassis is the same as before with MacPherson struts in front and a torsion beam at the rear, a common layout in many of today’s vehicles. Feedback from customers identified certain areas that needed improving in the vehicle dynamics. The improvements have been achieved by small engineering revisions in the suspension, body architecture and electric power steering. Adding reinforcements in some areas has contributed to better rigidity.
The torsional rigidity and spring rate of the steering column has also been increased by 15%, affording a smoother feel during direction changes. Initial corner turn-in is more direct when compared to the previous HR-V, and the overall feel during manoeuvres is much more linear and precise.
At the rear, the compliance bushes have been modified in both construction and design to improve rear wheel control and ride comfort. The liquid-filled bushes have increased damping performance and good low-frequency performance providing excellent primary ride, whilst absorbing certain frequency vibrations to improve secondary ride. In revising the bush design, a flange has been added to reduce lateral movement across the bush.
Noise, vibration and harshness (NVH) are what the passengers constantly experience and making them as low as possible makes a big difference to not just comfort but also the perception of quality. To lower NVH, the engineers focussed on two areas – engine acceleration and road noise. They didn’t just mask the noise and vibrations by using more insulation but also made changes to certain parts or added reinforcements so that the frequencies would become less disturbing.
Contributing to reducing accidents, Honda Malaysia has made Honda SENSING standard in every variant. This suite consists of 9 active safety systems, including Adaptive Cruise Control, and they rely on a camera positioned at the top of the windscreen. The omission of a radar helps to lower cost and to ensure that the camera alone is enough, it has been given a wide forward view (about 100 degrees left to right) and the image processing software is also more advanced for enhanced recognition capability.
The system can identify other vehicles, people and also lane markings as well as gravel and grass edges. The latter is important for the Lane Keeping function which limits the vehicle from drifting out of its lane. On long distances, this feature can help reduce fatigue as the driver does not have to make minor corrections to the steering to stay in the lane.
When driving on slopes, there are also systems that will help the driver. Hill Descent Control, when activated, will manage the speed safely downhill so all the driver has to do is steer to avoid obstacles. There is also an AUTO HOLD function to keep the vehicle motionless on a slope without having to keep the foot on the brake. This is now possible with the electrically-operated parking brake.
Honda LANEWATCH, the innovative camera-based blindspot monitor, is fitted to the V and RS variants. This system shows real-time images of the left side of the vehicle, allowing the driver to spot if there is a motorcyclist or other vehicle coming up. The image is shown on the centre panel and comes on whenever the left signal light is activated.
The compact dimensions of the HR-V allow for only two rows of seats but the legroom is generous, with rear passengers getting 35 mm more space. This is helped by having the fuel tank situated under the centre (an idea which originated with the first Jazz). Like the City Hatchback, the HR-V cabin can be configured in three layout modes – Utility, Long and Tall. In the Long mode, there is a floor length of up to 1.9 metres when the rear backrests are folded down. Along with the high ceiling, this allows for 2 mountain bikes (with front wheels removed) to be stored on board. The Tall mode allows tall items (like plants) to be carried as the floor to ceiling height is maximised by folding the rear seats up. The idea has been used in some Honda models for around 20 years, since it first appeared in the Jazz.
For those who own the RS variant, loading cargo is even more convenient with the handsfree feature that opens the rear door automatically. Just placing a foot under the rear bumper unlocks and raises it and even better, it will close by itself too when the owner has gone further than 2 metres away.
The dashboard has the same clean design with a combination of touch and physical controls. It’s clear now that touch controls are not necessarily ideal for every function so the interior designers have provided rotary controls and pushbuttons for the air-conditioner and ventilation system. These can be operated without having to look, unlike touch controls where you have to look and then focus on an icon – which is not so good for driving safety.
Talking of air-conditioning, besides having two zones so the front passenger and driver can set their preferred temperatures, there is also an Air Diffusion System which is a first for Honda. This introduces a new concept of air conditioning, with L-shaped vents positioned in the top corners of the dashboard that deliver the restorative effects of a natural breeze to all occupants.
The idea was born from the concept of designing light and wind to improve passenger comfort, with nature as inspiration. The new ventilation approach resolves a disparity in traditional vent configurations, where passengers often feel uncomfortable with air blowing directly onto them. When activated by turning a dial, the Air Diffusion System creates a new gentle flow of air which discreetly flows like a soft breeze along the side windows.
The air also travels to the roof, creating a gentle vortex of air that is barely perceptible to passengers. We’re not sure if the breeze will reach the back but the rear passengers will also be comfortable as there are vents closer to them behind the centre console.
Being a Honda, the equipment list can be expected to be extensive with many features thoughtfully included. The infotainment system has Android Auto and Apple Carplay which expands its useability to include apps from smartphones (like Waze and Spotify) while there are 4 USB ports for recharging devices. The driver of the V and RS variants gets 8-way adjustment on their seats and those in the V variant also have paddle shifters. All variants have pushbutton start/stop and also auto locking when walking away (with the engine off).
Except for the S variant, all the other three HR-Vs can be started from a distance with the Remote Start. In movies, such a feature would be used as a precaution in case there’s a bomb under the car (set to go off when the engine starts) but in real life, Remote Start is useful for starting the engine so the air-conditioner can run and cool down the cabin.
For those who like the extra class that leather gives, this is standard for the upholstery in the V and RS variants. For the other two variants, fabric upholstery is provided. Throughout the cabin though, there are many areas where the panels have soft padding for a more premium feel.
Honda CONNECT, a telematics system that provides safety, security and convenience, is provided with the E, V and RS variants. This system can track the vehicle’s position so it can be located if stolen and owners can also set ‘geo-fencing’ so they will be alerted if the vehicle moves out of a designated zone. In the event of a severe collision, an automatic notification will be sent out so that help can be quickly sent. Honda CONNECT also allows the owner to check on the condition of the battery and fuel level without being inside the vehicle, and there will be reminders when routine maintenance is due.
As with other Honda models, there is also the option of adding genuine accessories to personalize the HR-V. Honda Malaysia offers 5 packages with different themes, with prices ranging from RM1,106 to RM3,780. As the cost of these packages would be included in the total price of the vehicle, they would also be part of the financing plan.
The new HR-V is now at Honda dealerships nationwide and if you want to view or test-drive on, locate the nearest showroom at www.honda.com.my.
Some people may regard vehicle recalls to fix manufacturing defects in a negative way, perceiving them as evidence that the brand’s products are unreliable or poorly made. However, in mass production where millions of parts and vehicles are made, there are likely to be some times when something is wrongly done or made. Nevertheless, over the years, manufacturers and their suppliers have cut down these defects to very tiny percentages.
When a manufacturer does detect a defect, it has the responsibility to its customers, especially if it concerns something that concerns safety. A responsible manufacturer will therefore conduct a recall of the affected vehicles, and provide the necessary replacements at no cost to the customer. So customers should be happy when their manufacturer does that – although frequent recalls would be another matter…
Honda Malaysia has done recalls from time to time, its most massive exercise being to replace the Takata airbag inflator module. That was a crucial recall as there was a very high risk of people being seriously injured or even dying if the module broke up.
Now comes another recall (two different ones actually) which the company says is proactive, meaning it is a precautionary safety measure as no incidents have been reported. In the first one, technicians will inspect the nut torque on the Alternating Current Generator (ACG) to determine if it is correctly tightened on the ACG terminal of the engine harness. If not, there may be poor contact and a battery malfunction which may lead to engine stoppage while driving or being unable to start the engine after the car stops. The models affected are 1,068 units of the City (2021) and City Hatchback (2022)
The second issue requires inspection of the bolt earth grounding tightness, also to check if the tightening of bolt earth grounding is correct otherwise the wire harness will be loose. This may cause poor contact terminal and may result in engine stoppage while driving or being unable to start the engine after the car stops. The models affected are 343 units of the HR-V (2020) and 116 units of the BR-V (2021). All the models affected were assembled at the Honda plant in Melaka.
Honda Malaysia apologises for the inconvenience caused to the affected customers and assures the public that all current production and selling models are not affected in this recall. The company believes this product recall is necessary as customer safety is Honda Malaysia’s top priority, and will continue to uphold transparency and stringent controls.
Owners of the affected vehicles will be informed via notification letters which will include details of the recall. Honda Malaysia urges those with affected vehicles to contact any authorised Honda dealer in Malaysia to make an appointment upon receipt of the notification. They can then bring their vehicles for inspection and necessary action (subject to parts availability). The inspection, repair and replacement of affected parts are free of charge and all costs related to this recall activity will be borne by Honda Malaysia.
In the event that you are not the original owner (whose records will be with Honda Malaysia) but want to check if your vehicle is affected and obtain the necessary support, call Honda Malaysia’s toll-free number at 1-800-88-2020.
You’ve probably heard that Honda will soon be launching the all-new HR-V in Malaysia, following its launch in Thailand and Indonesia over the past 8 months. As usual, Honda Malaysia is offering a chance for those who want to be the first in the neighbourhood to own the new model a chance to make their bookings from today.
Honda Malaysia will launch the model sometime in the next 3 months and as with the current range, there will be petrol and hybrid powertrains. The HR-V Hybrid progresses from the Sport Hybrid i-DCD system to e:HEV technology with the intelligent Multi-Mode Drive (i-MMD) system. Already available in the latest City, e:HEV technology in Honda’s hybrid system combines the benefits of a 1.5-litre petrol engine and an electric motor to provide more power (131 ps/253 Nm) with good fuel efficiency.
Measuring 4385 mm in length, the new HR-V is 39 mm longer than its predecessor while the 1790 mm width is similar (to the current RS version only) while the roof is 15 mm closer to the road.
The front appearance is dominant with a new grille design which is a total departure from the previous ‘wing’ theme, while the rear has fastback styling though to our eyes, it looks less sleek than before.
New exterior features include front LED Sequential Turn Signals (the signals ‘move’ as the illuminate), and a LED Taillight Strip which adds a visual signature visible from a distance. Other key exterior features include new LED headlights with DRLs, LED foglights and 18-inch alloy wheels.
As with other models, there’s Honda SENSING, a suite of active safety systems but this is only in the RS version. Honda SENSING includes automatic emergency braking, lane keeping and adaptive cruise control (with low-speed follow). Additionally, the RS version also has the useful Honda LaneWatch system which provides a real-time camera view of the blind spot of the left side of the HR-V.
This variant also has a Hands-Free Power Tailgate with Walk Away Close function, where the tailgate will start closing automatically upon detecting that the individual with the remote key is moving away from the car. Other features are Remote Engine Start and Walk Away Auto Lock functions.
“The HR-V was first introduced to the Malaysian market in 2015, and it became a best-selling as well as a sensational model. With its proven track record, the HR-V is truly the compact SUV that is loved by many Malaysians. Therefore, we are excited to be introducing the All-New HR-V in Malaysia, which is now officially open for bookings,.” said Honda Malaysia’s Managing Director & CEO, Hironobu Yoshimura, adding that some 150,000 units have been sold nationwide since its launch 7 years ago.
When the HR-V was originally launched, it was a hotseller from the first day. Will this new model continue to command the biggest following in the segment? Since 2015, a number of new rivals have appeared on the scene so there are more choices at competitive prices.
To pre-book the new HR-V, customers can visit prebook.honda.com.my or download the HondaTouch application on their smartphones. Honda dealerships will also accept bookings, of course, as well as provide more information. To locate a showroom in Malaysia, visit www.honda.com.my.
In the early 1980s, Honda was looking at a new generation of engines for the mainstream market. It was a period when multivalve cylinder heads (more than one intake and one exhaust valve) were beginning to enter mainstream engine design and Honda was looking at something which would enhance performance further. This effort brought forth the New Concept Engine (NCE) program in March 1984 which had specific targets that included high torque in both the low and high rpm ranges and dramatic increases in horsepower per litre. The program was a success, resulting in a series that included the DOHC engine found in the 1985 Civic and Integra, and the SOHC centre-plug engine in the 1987 City.
Ikuo Kajitani, an engineer in Honda’s Tochigi R&D Centre, was involved in the development of these 4-valve engines. Through his experience in engine design, Kajitani had become convinced that Honda’s next engine should offer a mechanism that could alter the timing of the valves. “Characteristically,” Kajitani said, “4-valve engines are known as high-revving, high-output machines. And for that reason, we knew it would be quite difficult to achieve low-end performance if the engine’s displacement were too small.”
Understanding the challenges
There were various problems during the process of development, eg a reduction in the valve’s interior angle, attempted in order to increase low-end torque, resulted in a broken timing belt and valve spring as the unit reached the upper rpm range. To address the problem, the development team put in long hours studying how to balance these two critical areas of engine performance. They knew they had already succeeded with their DOHC and SOHC powerplants, but to develop a new unit that would outperform its predecessors they would have to bridge the gap between the low end and the upper limit.
One group examined the idea of ‘switchable valve timing’ and in January 1983, a year before the NCE program began, a research team was formed to study the mechanism as a means of enhancing fuel economy… even though by the end of 1982, Honda engines were already capable of a world-beating 17.7 kms/litre.
A possibility was identified through the study of a new valve mechanism. Specifically, it was believed that the installation of a new set of cam followers and rocker arms for high-speed operation on the intake and exhaust sides would help, along with the switching of cam hills according to engine speed. This was to be their solution to higher engine efficiency and was the so-called “valve stopping + variable valve timing” mechanism employed in the NCE program.
The mechanism underwent a program of study and refinement. Eventually, it evolved into Honda’s VTEC (Variable Valve Timing & Lift Electronic Control System) engine that would become a key feature of Honda engines up till today. The new technology, which offered a new level of performance, made its debut in the 1989 Integra.
New technology for future engines
“Find a new technology to lead the next generation of Honda engines.” This was the directive issued by top management at Honda R&D and, in response, a project was proposed to expand the variable valve-timing approach. Since it had originally been created to improve fuel economy, the engineering staff’s new assignment would be to combine outstanding mileage with impressive output across the entire powerband.
Approval was given in November 1986 with the first objective being to develop a new engine for the Integra. Kajitani, a lead engineer of the engine development project, knew that working on VTEC technology would not merely solve many problems he had experienced in development of the DOHC and SOHC engines, but would play a major role in the creation of future powerplant designs.
100 bhp per litre
He believed the specification for Honda’s new engine – 90 bhp per litre (or 140 bhp from a 1.6-litre unit) – was not really reflective of the 1990s approach. After all, the DOHC engine already produced 130 bhp but the new engine would only have 10 bhp more than that. He was not satisfied with that level and as if to read Kajitani’s mind, Nobuhiko Kawamoto, then president of Honda R&D made a thoughtful suggestion: “Why don’t you raise your target to 100 horsepower per litre?”.
It had always been thought that a normally-aspirated engine could not be made to produce 100 bhp/litre. But Kawamoto was an experienced engineer and his words inspired Kajitani. The new target would mean 160 bhp from only 1.6 litres, and at a maximum of 8000 rpm. “We’ll make that our goal,” he declared.
“Conventional engines in those days could only produce 70 or 80 bhp per litre. But here we were, being asked to increase it all the way to 100 bhp… it wasn’t going to be easy,” Kajitani recalled. “An engine becomes subject to a higher load as you increase its rpm. So we had to keep in mind the quality-assurance target of 15 years, or 250,000 kms, for a mass-production engine. We all wondered how on earth we were going to reach that number while ensuring the required quality of mass production.”
When Kajitani sat down with his associates and told them the target, he was immediately swept back by a barrage of questions. For example, the target of 8,000 rpm was almost 20% higher than the maximum output of 6,800 rpm achieved by the 1.6-litre DOHC engines of that time. Moreover, the inertial force upon various engine parts would increase by 40% and the engine would be subject to considerably higher loads due to its increased interior heat. Therefore, to reduce inertial mass under such high revolutions, the weight of each part would have to be reduced. Discussions were held daily for 3 months.
Finally, after everyone had expressed their opinions and proposed ideas, it was time to align all vectors in a single direction. The team identified some 30 new mechanism and technologies they would need to introduce in order to secure a stable VTEC system. These included a valve-operating system with a hydraulic timing selector pin, a small hydraulic tappet mechanism built into the rocker arm, and weight-reduction techniques to achieve higher revolutions and output.
Is it genuine technology?
But Kajitani was not certain which technologies should be used and which should be set aside. He kept asking himself, “Is this technology genuine?” It was a question Kawamoto asked too. Kajitani’s personal view was that a technology would be ‘genuine’ if it had been in the market around for 10 years. “Even so, a technology that’s been for around 10 years is one that’s accepted by society. In that sense, there shouldn’t be any problem adopting such a technology to all models,” he said.
The difficulties the team endured through its discussions with the committee helped bring the VTEC engine to life. But there was often fear in Kajitani’s mind, as well. “I thought we might not be able to achieve it because the goal was too high,” he said.
It was quite difficult, for example, to balance the valve-timing lift against the load placed on the timing belt, which would increase at high rpm due to the spring and other factors. Although it was a problem needing a solution in order to achieve the target output, such an answer would not be easy to find.
One of the approaches taken to increase output across the full rev range was by widening the diameter of the intake valve. Also, the team adopted valve timing and lift settings that were comparable to Honda racing engines in order to enhance volumetric efficiency. The improved output resulting from that technique actually served to improve performance at high speeds. Additionally, measures were taken to reduce intake resistance. At last, the goal was reached, with a full 160 bhp at 7600 rpm and a redline of 8,000 rpm.
Low-speed torque, an initial project objective, was obtained by changing the low-speed cam’s setting. This permitted the intake valve to close early, drastically improving the engine’s volumetric efficiency. Since the engine now had higher efficiency at low speeds of operation, a broader torque band could be realized.
The implementation of new materials was certainly a factor in the successful application of these technologies. For example, since the VTEC engine’s three cam followers must be positioned in a single bore, the camshaft offers relatively limited cam width. Therefore, the shaft must be designed to withstand high surface pressures. To achieve this, the team developed a new camshaft of cast steel.
Ensuring reliability
The VTEC engine program then went into a critical phase. In order to ensure absolute reliability in mass production and introduce the engine to the market with confidence, the team had to guarantee the functions of all mechanisms and parts. In addition to a significant responsibility for product reliability, the team had special expectations regarding the VTEC engine. “We all shared the determination to apply these technologies to every Honda model,” said Kajitani. The team’s view was that VTEC technology shouldn’t be limited to the Integra alone but further improved for use on future Honda models.
First Honda model with VTEC engine.
Honda’s new Integra, equipped with the DOHC VTEC engine, was introduced to the market in April 1989. The VTEC technology drew considerable praise as the world’s first valve mechanism capable of simultaneously changing the valve timing and lift on the intake and exhaust sides. In addition to its impressive output and high-revving energy, the VTEC powerplant offered superior performance at the low end-including a smooth idle and easy starting-along with better fuel economy.
Evolution of the VTEC engine
The DOHC VTEC engine was subsequently adapted for use in the NSX as well as the Accord and Civic. Following the SOHC VTEC engine, and then the VTEC-E in 1991, the technology evolved into the 3-stage VTEC engine introduced in 1995, which demonstrated an even greater degree of efficiency in output control. By 2001, the K-series engine family incorporated the first i-VTEC cylinder with an automatic self-adjusting cam gear to continuously optimize valve overlap for all rpm ranges. A number of the latest Honda models have the 1.5-litre VTEC TURBO engine, a powerplant that retains the fuel economy benefits of a small engine and yet produces torque exceeding that of a 2.4-litre engine.
The latest VTEC powerplant is the 1.5-litre VTEC TURBO which is used in the CR-V, Accord and latest Civic (below).
When Honda Malaysia first announced the pricing of the top of the line Honda City RS, many thought that the company had lost the plot.
The Honda City is a loved car in Malaysia. Many swear by it for its practicality and simplicity. It’s a fuss-free car that offers a good ownership experience.
The latest generation City though takes it all a notch up and includes spaciousness and impressive build quality into the mix.
But to ask RM108,000 is just borderline absurd.
The RS model is the top of the line model and features an impressive powertrain designed for fuel economy and power offered in a handsome package that also features space and quality that can rival some European marques.
Many were floored when Honda Malaysia first announced the price.
The Honda City has always been the cheap sedan that you bought if you wanted a reliable means of transport for you and your family. And you can still get that with the “lesser variant” such as the S-Spec that only costs a little under RM76,000.
But that’s also what some would call “taxi-spec”, referring to a model that only offers the bare minimum.
The RS is the model you truly want if you are the type that appreciates all the bells and whistles and the cattle they hang from.
But a Honda City at RM106,000? That’s like asking people to pay RM50 for a ‘Ramly Burger’.
Lets get metaphorical and imagine this – instead of the mass produced two millimetre thick patty that we usually get in a ramly burger, imagine that same burger but with a wagyu beef patty cooked in virgin olive oil with blue cheese and premium organic vegetables and condiments placed in between soft bread sprinkled with sesame and chia seeds.
And instead of being served in a sloppy piece of wrapping paper, you get it properly wrapped in a premium paper box placed inside a woven tote bag. And best of all, it is hand delivered to you within 30 minutes of ordering.
That RM85 does not sound so bad now does it. I know that referencing a burger against a Honda City is also absurd, but you get the point.
So that’s basically what Honda has done. Taken a well known and much loved product, plonked in a cleverly engineered powertrain, increased the quality of everything and made the interior a very nice place to be in.
And then there is the Honda City RS hatchback.
It is basically all of the above but in a hatchback body. And at RM108,000, Honda wants RM2,000 more for it. Why? Because it has something called Ultra Seats, which gives the hatchback a level of practicality that you do not get in the sedan variant.
The Ultra Seats is basically a fancy word for seats that can either fold up to let you store tall items, fold down for long items, and amazingly can fold in such a way that you can basically create a bed which makes the City RS hatchback perfectly suited for all you ‘glamping’ lovers.
The City RS Hatchback is also powered by the same 1.5-litre hybrid powertrain that powers the sedan.
It puts out a mere 98hp and 127Nm of torque. But it has an electric motor that pushes up the torque figure to an impressive 236Nm.
This gives the car a fun character around the corners. I imagine that weekend warriors will love the urgent response and nimble front end the hatchback offers while their parents will appreciate the spaciousness and the fuel economy.
The only thing though is that there is a setback in terms of top speed, while the regular combustion powered variants max out at 194km/h, the RS has a top speed of 175km/h. But while the other variants need 10.7 seconds to reach 100km/h, the RS needs just 9.7. And best of all, according to Honda, the other variants will need 5.6 litres of fuel to reach 100 kilometres. The RS though needs just 3.6 litres, which with today’s fuel prices puts it at just under RM10 to travel 100km.
But it’s not just the powertrain that makes the RS model stand out from the rest. It is also the interior that works a charm for me.
The seats are the first thing that charm your senses. And the fact that they come wrapped in something Honda calls Ultra Suede makes it nice to touch and even nicer to sit on.
And because this is the RS variant, the side bolstering holds you in place every so gently.
The dash is easy on the eye and to the touch. The steering wheel feels meaty in your hands and the buttons actually do feel like they belong in a RM100,000 car.
On that point, even the tiny weighted clicks of the air-conditioning dial invoke a premium feeling that you would not expect to get in a City.
The entertainment system is accessed through an eight-inch display that also offers Apple CarPlay and Android Auto. It also offers smartphone mirroring capability that lets you access your navigational and other favourite applications and mirror those on the screen.
Honda has undoubtedly done a remarkable job with the interior of the new City. During our test drive event, there was a Toyota Yaris available for comparison and the interior of that felt dated and unimaginative.
The final thing that makes the argument for this City costing above RM100,000 is the fact that it comes with Honda’s popular Sensing safety suite.
Honda Sensing is basically a collection of advanced safety technologies that make the City an incredibly safe car, perhaps one of the most laden with safety tech.
Before we dive into what is on offer with Honda Sensing, keep in mind that the City RS hatchback already has LaneWatch, Hill Start Assist, Auto Brake Hold, Vehicle Stability Assist, six airbags, ABS and EBD.
Honda Sensing takes it all a notch higher by further offering Lane Departure Warning, Road Departure Mitigation, Lane Keep Assist, Forward Collision Warning, Colliding Mitigating, Auto High Beam and Adaptive Cruise Control.
Consider for a second that these are exactly the same safety systems also available in the pricier Honda Civic and the Honda CRV. The only omission being that the adaptive cruise control does not offer stop and go function.
Now, is the Honda City RS hatchback worth the RM107,000 asking price?
There is no doubt that it is a fine car with premium feel and a powertrain that balances the holy grail of power and economy. It is also packed with safety tech and has a drive that will put a smile on the faces of the young and not so young.
The simple answer would be yes for those who appreciate the tech. And the not so simple answer would be to consider the V-Spec which is a full RM15,000 cheaper and features all of the above but minus the hybrid powertrain and the Ultra Suede seats with red stitching. I actually prefer the leather seats available in the V-Spec than the fabric seats of the RS, as plush as those may be.
In the past, Honda Malaysia would usually take us to Thailand to get first impressions of a new model and we would get to drive it some distance in places like Chiangmai or Phuket. However, with border restrictions due to the pandemic, that is no longer possible so they organized a brief drive at the Sepang circuit before the launch of the new Civic and then arranged for a media drive to Penang and back (not during the Hari Raya period, of course). Here’s what Chips Yap found out about the C-segment leader…
Whenever I look at the recent generations of Honda Civics, I am always struck by how the model has grown in size since it first appeared in the 1970s. When I tested the first generation, it was just a small hatchback and it was even smaller than a Proton Iriz. But then again, cars back then were also smaller (besides being cheaper too).
With most generation changes, there was a constant increase in length but (disregarding the first generation which was only a hatchback) it was from the fourth generation to the fifth one which came at the beginning of the 1990s that saw the greatest increase of all the generations to date. From around 4230 mm, the overall length extended to around 4450 mm – a 220 mm difference. The growth in size could have been due to the fact that Honda had begun making the Civic in America and its popularity had grown quickly, so it needed to be more ‘rightsized’ for that market.
The Civic began life as a hatchback but the sedan very quickly became the dominant version globally.
In time, it would be the US market that kept the Civic line alive and evolving because in Japan, it was no longer favoured. In 2009, out of the 609,000 units sold globally, only 9,000 were sold in Japan, and in the following year, Honda decided to stop selling it. It brought back the model in 2017 but still its appeal remained low as buyers preferred compact models and the mini MPVs. By 2020, the company again decided to stop Civic sedan sales in Japan when only 1,619 units were sold in the entire year.
However, outside Japan, the Civic has remained a popular model; although it had started as an entry-level model with low pricing, it gradually moved out of that level and further up the market (which saw the City being introduced to take over its place). Nevertheless, in markets other than Japan, it had a following that kept volumes high enough to justify its continued existence to arrive at the 11th generation which we now have.
While the Civic continues to appeal to generally younger buyers, the latest generation has given up some of its bolder styling elements this time round. Unlike the 10th generation which had a major design change from its predecessor, an evolutionary approach has been taken. The overall size is close to the 10th generation, increasing in overall length by 30 mm with a marginally longer wheelbase as well.
The totally new frontal appearance suggests that the EXCITING H!!! DESIGN philosophy which was adopted in 2013 has been finally changed to a ‘New Age Identity’ that is thin and light look. There are still remnants of the Solid Wing Face but it is a much simpler form to complement the low bonnet and front fenders.
Also gone are the crab claw tail lights which gave the 10th generation a distinctive visual signature from afar. The new LED units wrap around the corners and taper towards the centre, generating s visual signature too but nothing really unique.
Models that have gone through as many generations as the Civic has – over almost 50 years – usually become more mature, just like humans do. And so it is with the styling which is still polished and has the premium look but maybe not as aggressive as the model before. It still has sporty undertones with the roofline flowing smoothly to the rear end and the repositioning of the A-pillars further back visually stretches the bonnet line.
The drive route took us through Ipoh and gave good insights into the new car’s behaviour in various conditions. Though Honda says that noise levels are reduced, there were times when it seemed that noise from the rear was still not much changed. We would put it down to the widely varying quality of road surfaces in our country as there were times when things were quieter and the level of vibrations felt was also low.
Although the CVT was available in Malaysia as far back as the 1980s (in just a couple of models), it’s only over the past 10 years or so that it’s become mainstream and I think it was Honda that was the first major brand to offer it in Malaysia with the first Jazz. Enthusiasts dislike CVTs because of its non-linear power delivery and most people cannot stand that ‘rubberband’ characteristic when accelerating hard. But the newer CVTs, like the one in the Civic, have improved feel and less mechanical noise evident though it is still not the same as a conventional automatic. With the RS model we tested, you get paddle shifters which are useful on twisty roads when you want better control.
While it’s the same powerplant as before, the 1.5-litre turbocharged 4-cylinder engine has improved output with an additional 10 ps and 20 Nm to push total output to 182 ps/240 Nm. It feels a little bit slow off the line but that generous torque gives it strong muscles once on the move. High speeds can be sustained easily and there’s quick responsiveness when you need an additional burst of speed to overtake.
The Civic is still a sporty handler, instilling confidence and able to give the driver an entertaining time behind the wheel with its agility around corners. Matching the mature looks, the ride is composed with a balance of sportiness and comfort. Thanks to increased body rigidity, roll is negligible and the suspension does a decent job of flattening most road imperfections but could do a better job of making potholes ‘disappear’.
For me, the highlight of this Civic generation is the dashboard. When I saw the first pictures of it, I somehow immediately had recollections of older Honda models. Friends who, like me, had been in those models of the 1970s, also felt the same way and it has something to do with the honeycomb grille that runs across the entire dashboard. It’s classy in a classic sort of way and I think that just as the designers of the Honda e looked back at the early models for the dashboard design, the interior designers of the new Civic also studied designs that predecessors adopted.
The whole dashboard has been visually decluttered, a change from the previous one, and even the air vents seem to be absent. But they aren’t – they are actually hidden under the finely detailed grille (which is metal, not plastic). The vents are adjusted by small handles which resemble joystick controllers so Gen Z should be right at home with them.
The other thing about the dashboard design is that the interior designers have paused on the rush towards digitizing everything and putting controls on display panels. It may seem like the way to go but there are practical reasons why rotary controls and physical pushbuttons are still better and the Civic shows this sensible thinking. There are three rotary knobs to adjust the air-conditioner blower speed and temperature and this is how it should be because these are operations you do not want to have to look at a panel to do. Most of the time, they are done intuitively, without looking, and that’s better for safety.
With adjustments done on a screen, I’ve found that you need to look at the screen and then precisely press a spot on it to adjust something. That’s not so good when you’re driving so Honda has got it right with the Civic, leaving the on-screen buttons as one-touch operations. Oh, the large icons on the 9-inch centre display are also appreciated and most of all, operations are intuitive enough.
It doesn’t need saying that the fit and finish are top-notch and being the RS version, there’s also a premium touch (for extra money, of course). I spent some time in the back seats and they have good form and function with the concaved cushioning providing good support and generous space on the floor. There’s good width for 3 persons to sit comfortably too with the body now having been broadened up to 1.8 metres, the widest ever in 11 generations.
The Honda SENSING driver assistance suite for the Civic RS has improved functionality and consists of 9 active safety systems. There’s now a Lead Car Departure Notification System which alerts the driver when the vehicle ahead moves off though I’m not sure if that’s really needed. But the Driver Attention Monitor is good as it could save a driver from dozing off and crashing. It monitors the way the car is being controlled and if there is unusual driving behaviour, the driver will be alerted (and should pull over for a break).
I used to disregard the value of lane-keeping systems but driving the Civic RS, I could see that apart from enhancing driving safety, the system can also help reduce fatigue on long journeys. Basically, the system will monitor lane markings and maintain the car in the middle. If there is too much deviation to one side or the other, there will be alerts but if the driver still does not take corrective action, then there will be gentle steering action to guide the car back into position.
While this may seem intrusive to some, I came to realise that when we drive, there is some adjustment of the steering to keep the car in the lane. You do it consciously or sometimes even unconsciously and it is something that requires a tiny bit of effort. If the lane-keeping system does this, then that effort is unnecessary and as I drove along gently winding roads, I noticed how the steering would turn by itself slightly as the road curved. And if you have the adaptive cruise control on, then you can enjoy a preview of autonomous motoring as well!
I’ve mentioned Honda LaneWatch a few times and praised it and I will again say it’s one of Honda’s great innovations which is now available in most models. It provides (on the screen) a view of the left side of the car whenever the left signal is activated and the good thing is that the head does not have to turn as much as if it had to look at the door mirror. Also, the small camera mounted on the mirror captures clear images at night so you get a better view. The LaneWatch display can also be manually activated by pressing on the button on the tip of the right stalk if there is a need to take a look at any time.
One thing which surprised me though was that, because the LaneWatch display uses the same centre panel, when it comes on, it dominates the screen. So if you’re looking at a map that was mirrored using Android Auto or Apple CarPlay, it will suddenly ‘disappear’. The first few times it happened, I found it a bit disconcerting as it would happen at that moment when I was watching for a turn. But then again, you can get used to it and live with it.
Sadly, the cost of the Honda LaneWatch system has been high and last year, Honda said that it would eventually stop offering it and go for more conventional blindspot monitoring systems like in other cars. It’s a pity because I thought they had found a way to reduce the cost in the newer models with a separate camera mounting.
The Civic RS version we drove is the top version of the latest range and it’s priced from RM144,350.09 (without insurance and sales tax exemption only till June 30, 2022). If it’s within your budget, the extra amount you pay over the other two variants is well worth the money. It comes loaded with all the latest features and being a Civic – and a Honda – you can be sure that it will not only be reliable but also hold its value well.
Over the next 10 years, Honda will allocate approximately 5 trillion yen in the area of electrification and software technologies to further accelerate its electrification, which is approximately 62% of the company’s overall R&D expenses budgeted for the same. This expenditure will enable it to have up to 30 EV models globally by 2030 with production volumes of more than 2 million units annually. This huge investment will help Honda achieve carbon neutrality for all products and corporate activities by 2050.
The strong focus on EVs – and presumably, Honda is referring to battery electric vehicles (BEVs) – may suggest that the carmaker will be decreasing development of internal combustion engines (ICE) and hybrid vehicles (HEVs). In fact, last year, it announced the intention to stop producing and selling new ICE vehicles, including hybrids, worldwide by 2040.
However, like what a number of major carmakers are saying, hurried adoption of BEVs is not a practical approach. Due to regional differences such as the level of customer acceptance, affordability, readiness of infrastructure and economic conditions, a singular approach to switching to BEVs globally is not going to work.
Honda will therefore be working on rapid transitioning to BEVs in markets and regions such as the USA, Europe, China and Japan while continuing with a more realistic solution for other areas. In those major markets for electrification, the ratio of BEVs and fuel cell electric vehicles (FCEVs) will be increased at a faster rate. In relation to overall unit sales, these zero emission vehicles will account for 40% of volume by 2030, 80% by 2035, and 100% by 2040.
In some markets like Malaysia, Honda also refers to its hybrid technology as e:HEV technology.
And even though North America is one of the regions that is part of the main electrification plan, Honda has still allocated R&D resources to develop new hybrid models for the near-term. This is to increase HEV volume of core models such as the CR-V, Accord and Civic which are produced there. Honda currently sells 4 HEV models in North America. However, Insight production will end in June to start production of the new CR-V Hybrid this year, followed by the Accord Hybrid, which will eventually make up 50% of the sales mix of each model.
2021 Honda CR-V Hybrid
“We need to take into account multiple factors, such as the living environment and the penetration rate of renewable energy, rather than simply switching to electric vehicles,” said Toshihiro Mibe, Honda’s CEO. “We are ending conventional engines but we will still focus on hybrids, and it will be our strength in 2030 or even in 2035.”
Honda, along with Toyota, were the first brands to introduce HEVs and while the Prius was the first into the market, Honda’s first generation of Insight arrived in the USA 7 months before the Toyota HEV. Following the futuristic looking Insight was the Civic Hybrid in 2002 and then the Accord Hybrid.
Honda’s first model with hybrid electric technology was the Insight, which made its debut in Japan in 1999. The CR-Z hybrid sportscar was sold between 2010 and 2016 but due to diminishing sales of coupes, Honda didn’t follow up with a second generation.
Honda continued to improve its hybrid technology (which it also refers to as e:HEV technology in some markets) as well as try to bring costs down and developed better hybrid powertrains for the next generations of the models. It also came out with a HEV sportscar, the CR-Z, in 2010 but as sales of coupes slowed down, the model line did not continue into a second generation.
So HEVs still have a future, more so now that they have moved from being of interest to early adopters to become more mainstream in the marketplace. While most HEV buyers would be aware that their car is powered by a petrol engine as well as an electric motor, the fact that a HEV needs no recharging (a plug-in hybrid or PHEV does) makes the technology ‘invisible’. It’s like turbochargers; in the 1970s, they were distinct features in high-performance engines but today, their presence is taken for granted in the new generation of downsized engines.
In Malaysia, Honda has been selling hybrid models since 2004 and assembling some models locally since 2012, starting with the Jazz Hybrid.
Honda’s continued attention to HEVs will also be beneficial in other markets where BEV adoption may be slow. HEVs can still help in a small way on the climate change issue as they generate lower carbon dioxide gases which have been identified as a major cause of global warming.
As with the City Sedan, Honda Malaysia has now added another variant of the City Hatchback with the Honda SENSING driver-assistance package for those who want more advanced safety systems. The new City Hatchback V-SENSING variant is similar to the City Hatchback 1.5V and is priced from RM91,708.51 (excluding insurance and sales tax), which is around RM3,852 more than the 1.5V without Honda SENSING.
While Honda has provided various types of active safety systems over the years such as ABS, Vehicle Stability Assist and Traction Control, these have been independent in their functions. With Honda SENSING, which was first introduced in 2015 in Japan and 2017 in Malaysia (with the 5th generation CR-V), the active systems function in a collaborative manner and expand the capabilities of recognizing as well as reacting to potential accident situations.
Such unified systems use either a radar or a camera, or both, to scan the road ahead for other vehicles and road-users as well as road markings. More expensive models usually have the radar as well but for the City Hatchback (and Sedan), Honda uses only a camera, probably to reduce the cost. However, compared to the earlier Honda SENSING system, the camera (mounted in the space above the rearview mirror) in the latest one has a wider view and improved imaging capabilities in all lighting conditions. The imagery captured by the camera is constantly analysed and also picks up lane markings on the road as well as the edge of the road.
Compared to the original Honda SENSING system first introduced in Malaysia, today’s system has increased features and consists of:
Adaptive Cruise Control (ACC)
Collision Mitigation Braking System (CMBS)
Forward Collision Warning (FCW)
Lane Keep Assist System (LKAS)
Road Departure Mitigation (RDM)
Lane Departure Warning (LDW)
Auto High Beam (AHB)
With ACC, the desired cruising speed can be set as well as the length of the gap with the vehicle ahead. The system will adjust the speed to maintain the gap.
ACC is a more advanced type of cruise control where the car can run in semi-autonomous mode. The driver still needs to pay attention and steer but once the cruising speed is set, there is no need for the driver to use the brakes to slow down if there is a vehicle ahead. The system will do it automatically to maintain a safe distance, returning to the set speed when there is no vehicle ahead. This will not only make driving easier in heavy traffic but also help to reduce fatigue on long journeys, improving safety.
CMBS and FCW are related systems, both functioning to prevent a collision with a vehicle ahead or hitting other road-users. FCW will warn the driver by sound and by warning lights if there is a risk of a collision. If the driver does not act to prevent this from happening – ie slowing down or braking – CMBS then activates and the brakes will be applied automatically. While the automatic emergency braking may or may not prevent a collision (depending on road conditions and speed), the earlier deceleration could reduce the damage of the impact if it occurs.
With CMBS, the brakes will automatically be applied if the Honda SENSING system determines that a collision will occur and the driver has not taken action to prevent it.
Incidentally, when CMBS occurs, the rear brake lights automatically flash and the hazard warning lights will also come on. This is to alert drivers in vehicles behind of the sudden braking so they won’t also collide… not all cars may have systems like Honda SENSING.
LDW, LKAS and RDM also related and their main function is to keep the car within its lane. These systems were developed as studies have found that many accidents have occurred due to the car wandering out of its lane without the driver being aware (usually due to lack of attention or drowsiness). The systems will not activate if a turn signal is in use, signifying that the car’s movement out of its lane is deliberately done.
The process starts with LDW which relies on the camera imagery to recognise lane markings. This may not be 100% perfect since the markings may not be present or worn out, or the road may be wet with rain. If the car is not positioned within its lane, there will be alerts to make the driver aware. Should the car keep drifting out of the lane, LKAS will start and the steering wheel will receive a slight turning action to guide the car back into the lane. Like ACC, this feature can also reduce driving fatigue on long journeys.
RDM operates like LKAS except it is for a more extreme situation such as when the car is about to leave the road unintended. The system will apply steering torque to bring the car back into the lane but if that is not likely to work, braking action may also occur to prevent further departure from the road.
How Road Departure Mitigation works.
AHB is a straightforward system which just switches the headlights between high and low beams automatically. When driving at night, the illumination should be maximised as much as possible and this is usually with high beams. However, they can dazzle oncoming drivers so they need to be switched low beams. AHB takes away the need for the driver to do this and the lighting will be kept at maximum as much as possible. Having high beam in use also enhances the effectiveness of the camera at night.
Also of note in the safety department is Honda Lanewatch, an innovative feature which provides the driver with a view of the blind spot on the left side of the car by using a small camera mounted on the door mirror. The real-time image is displayed on the 8-inch panel in the middle of the dashboard so the driver doesn’t have to turn the head all the way to the left to see the mirror. The camera is only on when the left signal is activated.
Besides having the same standard equipment as the Sedan, the City Hatchback also comes with the ULTRA seats at the rear. This is a simple but clever idea which originated in the first generation of the Jazz some 20 years ago. Where hatchbacks usually have rear backrests that fold flat to expand the cargo volume and floor length of the boot, the ULTRA seat folds up to also create extra cabin height for carrying tall items like plants.
Besides this TALL mode, there are three other modes – UTILITY, LONG or REFRESH. For the LONG and REFRESH modes, the front passenger’s seat can also be folded flat so there is an open space from the back door all the way to the dashboard to carry a really long item or just to stretch out. The UTILITY mode is essentially like what you get in other hatchbacks with the rear backrests folded down to enlarge the boot space which can accommodate bicycles.
Performance-wise, there is the same well proven 1.5-litre DOHC i–VTEC engine. This produces 121 ps/145 Nm which is the highest in its class and the power gets to the front wheels through a CVT.
For more information on the City Hatchback V-SENSING and other Honda models, visit www.honda.com.my or any authorised Honda showroom.
Even before its official launch (around the middle of this year), the next generation of Honda’s Civic Type R has started to collect records. As it goes through final development evaluation, test-drivers have been pushing it to the limits and in the course of one run recently, a new lap record for a front-wheel drive car was set at the Suzuka Circuit in Japan.
It lapped the 5.8-km track in 2 minutes 23.120 seconds, which was 0.873 of a second faster than the time achieved by its predecessor, a 2021 Civic Type R Limited Edition which was a development car.
The Suzuka Circuit, opened in 1962, is famous for its high-speed chicanes and challenging corners. It has hosted the Japanese Formula 1 Grand Prix for all but two years since 1987. Racing drivers regard it as one of the world’s greatest circuits and it has been a popular course for testing high performance Honda models.
Before the previous front-wheel drive lap record at Suzuka, Honda’s tenth generation Civic Type R GT broke the front-wheel drive lap record at the Nurburgring Nordschleife in 2017 with a lap time of 7 minutes 43.8 seconds. A production specification Civic Type R GT went on to break front-wheel drive production car records at 5 legendary European racetracks.
