The Crown is one of Toyota’s oldest models, having made its initial debut in 1955 as the company’s first mass produced passenger vehicle. It has remained in the line-up to this day, elevating to flagship status during the 67 years. However, times have changed and Toyota feels the Crown has become unable to fully meet the diversifying needs of its customers, and its role as a flagship model has also become less significant.
This has led to a complete rethink for the new generation which sees 4 different models that will carry the nameplate. In addition to a new Crossover, there will be a Sport as a new addition. There will still be a Sedan, of course, and this will continue with a formal design (although the pictures show something very advanced), and a Stationwagon/Estate which is now more of a functional SUV.
Due to the diverse range, Toyota won’t be launching all the versions together and, as a reflection of the current market preference, it will start with the Crossover. This model will go on sale from the fourth quarter of this year and will be offered in around 40 countries, Malaysia being a possibility. The eventual annual production is expected to reach 200,000 units.
Incidentally, the Crown was assembled in Malaysia at one time back in the early 1980s but large limousine-type Japanese cars were not favoured then so the model was discontinued. Times have changed, of course, and while the German brands still command the premium segment, Lexus has shown that the Japanese can also offer comparably premium products. So it’s likely that the new Crown will eventually appear in Malaysia as a complement to the Alphard.
The Crown Crossover
At this time, Toyota is only providing details of the Crossover so that’s what we’ll look at. As the term suggests, the bodystyle is a ‘crossover’ from a sedan to a SUV (‘the fusing a sedan and an SUV’ as Toyota puts it) and is a popular approach these days. The design has a coupe-like silhouette for a sporty image, while the elevated body satisfies the SUV side.
The lighting units at the front and rear connected from left to right in a single straight line, emphasising width visually. The side view shows surface variation without relying on character lines, creating a clean but sophisticated appearance. The overall length is 4930 mm, with a width of 1840 mm, on a wheelbase of 2850 mm. That’s larger than a Lexus RX and around the same length as a BMW X6.
The new Crown also uses TNGA, the versatile platform with Toyota’s New Generation Architecture. This has been adapted for use (TNGA-K) in the new model and provides a lightweight and well-balanced body with high rigidity. As with all SUVs and crossovers, the hip point is high for ease of entry and exit which is prioritised. This has been helped by having large-diameter wheels that raise the floor level. Additional space is provided above the head and to the front and rear for a more comfortable cabin.
The 2-row interior is typically Toyota with a lot of attention to visual and physical comfort. Horizontally integrating the display and operating equipment creates a functional layout that can be operated intuitively from any seat. The wrap-around form from the instrument panel to the doors also gives a sense of security.
As befits a flagship model, much attention has been given to every interior element, with the use of an understated and welcoming material known as WARM STEEL. The finishing of the seats, designed to be ‘first class’, helps a space with a sense of quality and richness.
While other carmakers may use the opportunity to go fully electric, Toyota remains cautious in how it moves into the electric era and still strongly believes hybrid electric vehicle technology is a practical solution for now. Thus the new Crown will come with two hybrid powertrains – 2.5-litre Series Parallel Hybrid System and 2.4-litre Turbo Hybrid System.
The 2.4-litre Turbo Hybrid System combines an inline 4-cylinder turbocharged engine with strong torque (550 Nm/350 ps) even at low RPM with the latest eAxle electric powertrain. The rear wheel eAxle uses a high output water-cooled electric motor combined with the engine to directly transmit force to all four wheels.
Electrical power will be supplied by a newly-developed bipolar nickel-hydrogen battery pack, a first for Toyota.
The Toyota Safety Sense suite is an upgraded one with advanced and improved functions. The range of situations it can respond to has been expanded even further, giving the driver more peace of mind to enjoy motoring.
Also available will be Toyota Teammate, a suite of driver-assistance technologies. Advanced Drive support during traffic congestion), and Advanced Park. The latter can automatically park and exit from a parking space in a variety of situations and can be operated remotely as well.
“The Crown has long served as the flagship of the Toyota brand. This flagship has represented Japanese success and pride, bringing together Japan’s world-class technology and skilled workforce. The new Crown is full of these underlying strengths,” said Toyota President, Akio Toyoda, at the presentation of the new model today.
Hyundai will launch its first all-electric high-performance model in 2023. This will be based on the IONIQ 5 and is currently being developed by the carmaker’s N high-performance division. For the development work, the engineers are using two high-performance concept cars — the RN22e and N Vision 74 – as ‘rolling laboratories’.
Hyundai Motor’s ‘rolling labs’ are where it tests and verifies the company’s advanced technologies to apply them to future production models. In this case, a lot of work is being done on electrification and how to provide models with the type of performance the N brand is known for.
Adapt from IONIQ 6
The RN22e, which possesses track-ready performance, uses the Hyundai Motor Group’s E-GMP and a design based on the IONIQ 6 Electric Streamliner. As Hyundai N’s first rolling lab based on the E-GMP, the RN22e shows the N brand’s vision and direction in an electrified future. The concept received its designation because it is the rolling lab of N brand developed in 2022 and is an EV performance.
Testing of the RN22e focusses on the brand’s three performance pillars. These start with ‘corner rascal’, a cornering capability since the brand launch that makes use of e-LSD, Corner Carving Differential for most N models. The RN22e enhances the ‘corner carving’ feel with heavier weighting by exploiting torque vectoring. 3D-printed parts reduce weight and keep the rigidity high for better handling. With AWD, there is optimized torque distribution whatever the drive mode and the driver can customise the amount of torque going to the front and rear wheels.
Enhancing racetrack capability
To enhance the RN22e’s racetrack capability, the N engineers focused on cooling and braking endurance. Track-optimized settings let drivers go to the limit with 4-piston monobloc calipers and 400-mm hybrid discs to ensure plenty of stopping power is available. In addition, the engineers will use the RN22e to study how to deliver dynamic movement with regenerative braking that can precisely controls yaw and corner attack. Once verified, the new state-of-the-art technologies can be transferred to N production models.
Hyundai N Sound+
Sound is also part of the emotional driving experience – but electrified models don’t have the type of sound that excites enthusiasts. So the RN22e has N Sound+ which generates sound from speakers inside and outside the car. In addition, the N e-shift integrates the vibration and shifting feel with N Sound+.
By adapting the IONIQ 6’s streamliner design, the RN22e will leverage on the new EV’s aerodynamic features. In order to maximize the performance, Hyundai N added motorsport-inspired details that add visual dynamism and also improve cooling performance and aerodynamics.
Just a few months after its global debut, the Ferrari 296 GTS – the ‘topless’ version of the 296 GTB – is in Malaysia, with its Southeast Asian premiere held at the Sepang International Circuit recently. Apart from the allure of being a berlinetta spider, this is the first ever Ferrari spider with a rear-wheel drive-only PHEV (plug-in hybrid electric vehicle) architecture in which the engine is integrated with a rear-mounted electric motor. The hybrid drivetrain is derived from Ferrari’s Formula 1 racing cars and another example of racing technology being transferred to road cars.
Plug-in hybrid powertrain
The 296 GTS uses the new 663 ps 120° 2992 cc V6 coupled with an electric motor capable of delivering a further 167 ps, the same unit found in the 296 GTB. With the additional power generated by the electric motor, total system output from the powertrain is 830 ps/740 Nm, of which 165 ps comes from the electric motor. This allows it to achieve a new specific power output record for a production car of 221 ps/litre.
Hybrid powertrain technology used in Ferrari’s Formula 1 racing cars has been brought to the 296 road car.
The powertrain assembly comprises the engine that powers the rear wheels via the 8-speed DCT and E-Diff, and the MGU-K located between the engine and the gearbox. A clutch is set between the engine and the electric motor to decouple them when in electric-only eDrive mode.
Sound-wise, the V6 engine rewrites the rulebook by harmoniously combining two characteristics that are normally diametrically opposed: the force of the turbos and the harmony of the high-frequency notes of a naturally-aspirated V12. Even at low revs, inside the cabin, the soundtrack features the pure V12 orders of harmonics; at higher revs, there is that typical high-frequency treble. This Ferrari’s soundtrack matches its performance, creating a sense of unprecedented involvement even with the top down.
Power with efficiency
Being a PHEV gives the 296 GTS the best of both worlds – lighting quick performance and also zero emissions motoring which can be up to 25 kms in all-electric eDrive mode. As was the case with the SF90 Stradale, customers who want to take the car further, especially on the track, can specify the Assetto Fiorano package which includes lightweight features and aero modifications.
The innovative top
With the RHT (retractable hard top) in use, the silhouette remains very similar to that of the 296 GTB. When it is stowed away, a sleek, sporty design is created. The lightweight RHT takes 14 seconds to retract or deploy at speeds of up to 45 km/h.
The need to stow the RHT inside the engine compartment required the creation of a new tonneau cover design. As a result, the folding roof splits into two sections that fold flush over the front of the engine, thus maintaining the engine bay’s thermal dissipation characteristics and the balance of the overall design. This also allowed the designers to introduce a window in the rear section of the engine cover through which the new V6 is clearly visible.
When the top is retracted, the cabin and the rear deck are separated by a height-adjustable glass rear screen which guarantees optimal passenger comfort even at high speeds. The separation line between the car’s body and the roof is above the B post.
Redesigning the 296 GTS’s engine bay to seamlessly integrate the RHT means that the engine has the same rich tone and intensity as the 296 GTB when the roof is up. The exhaust resonator system (Hot-Tube) has been optimised for the new cockpit geometry. The dropping of the top creates a direct, completely unobstructed connection between the cockpit and the sound produced by the single tailpipe exhaust line.
Radical aerodynamic solutions
The 296 GTS adopts several radical and innovative solutions in aerodynamics. The aero choices have turned the active aero paradigm, introduced from the 458 Speciale onwards, on its head. On the 296 GTS, an active device is being used not to manage drag but to generate extra downforce. The LaFerrari-inspired active spoiler integrated into the rear bumper allows the 296 GTS to generate a high level of rear downforce when required – up to a maximum of 360 kgs at 250 km/h.
The aero development work done on the 296 GTS means that even in low-drag configuration, the car can deliver more downforce than previous applications. In high-downforce configuration, there is an additional 100 kgs in downforce, thanks to the active spoiler.
The brake cooling system was developed around the Aero calipers that debuted on the SF90 Stradale, with ventilation ducts integrated into their castings. This cooling concept requires a dedicated duct to correctly channel cool air coming in through the air intakes on the front bumper through the wheelarch. In the case of the 296 GTS, the intake has been integrated into the headlight design.
This made it possible to push the design of the car’s underbody to new extremes, increasing the cooling capacity of the underbody without having to adopt any active front aero mechanisms. The signature aerodynamic element at the front of the 296 GTS is the ‘tea-tray’, a concept widely applied to single-seater racing cars. The rear surface of the bumper works in synergy with the upper surface of the tea tray to create a high overpressure field, which counteracts the depression field that characterises the underbody.
High levels of driver engagement
The car’s dynamic development focused around boosting pure performance and delivering class-leading levels of driver engagement. The targets were achieved by honing the architecture and keeping all the main vehicle components as compact as possible, as well as managing energy flows and their integration with the car’s vehicle dynamic controls.
The 296 GTB’s chassis was redesigned and optimised to improve torsional rigidity and bending stiffness compared to previous spider applications. From a chassis perspective, at 2600mm, the wheelbase is 50 mm shorter than previous Ferrari mid-rear-engined berlinettas to the benefit of the car’s dynamic agility. Other solutions that enhance the car’s handling and performance include the brake-by-wire system, the ‘Aero’ brake callipers, electric power steering, the rear active aero device and SCM-Frs magnetorheological dampers.
Meticulous attention was paid to reducing weight to ensure the car’s balance and delicacy of handling. The added weight of the hybrid system was offset by a number of different solutions, including the new V6 which weighs 30 kgs less than the V8 unit used on previous berlinettas.
Digital interface for cockpit
The 296 GTS’s cockpit was developed around the new concept of an entirely digital interface. This interior layout draws on the latter’s stylistic coherence for its forms. While with the SF90 Stradale the designers wanted to highlight the presence of the advanced technology and underscore a clear break with the past, in the case of the 296 GTS, the idea was to clothe that technology to sophisticated effect.
The cabin has the concept of the formal purity of the functional elements. When the engine is off, the onboard instruments go black, underscoring the minimalist look of the cabin. Exclusive Italian leather trim to the seats and trim is further enhanced by the noble technical materials used on the functional components. Aerodynamic flaps have been integrated into the rear trim structure to reduce buffeting and increase comfort in open-top driving.
The sculptural door panel is a seamless continuation of the dashboard in terms of both materials and colour. On the central medallion, the styling cue is a deep lozenge-shaped scoop, a three-dimensional element. This type of architecture makes the entire door panel look extremely light and integrates the theme that connects it to the rear trim.
“The convertible version of Ferrari’s first 6-cylinder road-going car takes driving thrills to new heights. Subtly restyled to accommodate the open top, the Ferrari 296 GTS adds a sense of freedom to the fun of every journey. At the wheel of the 296 GTS, you get to enjoy the result of Ferrari’s exploration into electric technology and also have the ability to make the most of the weather and your mood, maximising driving pleasure,” said Damien Woo, General Manager, Ferrari Malaysia, Naza Italia Sdn Bhd.
With Ferrari’s 7-Year Genuine Maintenance programme, the 296 GTS is priced from RM1,448,000 (before duties, customization options, taxes and insurance) from Ferrari Malaysia.
These days, there’s a new electric vehicle (sometimes even more than one) being launched or previewed every month and the technical aspects sound pretty much the same. The technologies to are generally similar with each company having some advancements of its own to shout about.
So with the new IONIQ 6, Hyundai Motor seems to skirt the technical parts and instead draws attention to the inside of the first sedan in its EV sub-brand. The interior of the ‘Electrified Streamliner’ is developed to serve as a comfortable and personalized ‘hideaway’, providing a unique and distinctive experience for drivers and their passengers.
“IONIQ 6 is designed and engineered to seamlessly enhance our daily lives as space to awaken your potential,” said Thomas Schemera, Executive Vice-President, Global Chief Marketing Officer and Head of Customer Experience Division, Hyundai Motor Company. “The innovative interior is meticulously thought out as a cocoon-like personal space, enhanced with the latest technologies to create a safe, fun, and stress-free driving experience. The spacious interior, with sustainability and usability at its heart, once again represents a step forward for electric vehicles, in line with the values of our customers.”
The cabin takes advantage of the E-GMP (the Hyundai Motor Group’s Electric Global Modular Platform) which allows an extremely long 2950 mm wheelbase, supported by a choice of 20-inch or 18-inch wheels. The E-GMP supports a streamlined body with an overall length of 4855 mm, 1880 mm width and 1495 mm height, which puts it in the D-segment.
A modular touchscreen dashboard integrates a 12-inch full-touch infotainment display and 12-inch digital cluster that houses advanced technologies for an enhanced digital user experience that can be customized to meet their needs. The infotainment system provides real-time travel radius mapping based on the current state of charge, while connected car services help search and plan the best route to include a charging station along the way.
Apple CarPlay and Android Auto bring favourite smartphone apps to the widescreen display. For those without compatible smartphones, there’s also Bluetooth multi-connection support available. Two devices can be paired at the same time — one for phone calls and one for music streaming.
The premium Bose sound system’s 8 speakers, including a subwoofer, are strategically placed throughout the vehicle for a high-quality listening experience. Complementing this is a ‘spaceship-like’ sound with a sound texture that changes based on the vehicle’s driving status. How this will be received by the occupants of the car remains to be seen. Perhaps the new generation of car-buyers brought up in the digital age will appreciate such sounds!
The optional Relaxation Comfort Seats in the first row promote leisure by simply adjusting the seat angle. In addition, all of its seats are specifically-manufactured for all-electric models, and they are approximately 30% thinner than those in other conventional models, providing more space for passengers.
Dual Colour Ambient Lighting allows a driver to customize the look and feel of the interior space by selecting from a spectrum of 64 colours and 6 pre-selected themes. The Speed Sync Lighting mode adds emotion to the driving experience by changing the brightness of the interior lighting in the first row based on the car’s travelling speed.
The IONIQ 6’s personalized driving experience is further enhanced by the EV Performance Tune-up system. This allows the driver to freely adjust steering effort, motor power, accelerator pedal sensitivity and driveline mode. Drivers can create a variety of different combinations with just a few button clicks to meet their individual needs.
Of course, we still need to tell you something about the technical aspects and here, the powertrains are varied. Customers can choose a long-range 77.4-kWh battery with 2 electric motor layouts, either rear-wheel-drive (RWD) or all-wheel-drive (AWD). The top-of-the-line dual motor set-up is an AWD option producing a combined power output of 325 ps/605 Nm, with a claimed 0 to 100 km/h of 5.1 seconds.
Hyundai Motor claims an impressive energy consumption rate of under 14 kWh/100 kms, with the 53-kWh standard battery pack, 18-inch tyres and RWD. It supports 400V and 800V charging infrastructures and with a 350 kW charger, the recharging time from 10% to 80 percent is said to be within 18 minutes. A fully charged battery pack should be good for over 610 kms.
The IONIQ 6, like the IONIQ 5, is also able to function as a mobile power station to charge electric devices. This would be ideal not only for camping but also when there is a disruption to power supply. In addition to the external power outlet, there is a second outlet under the back row seat which can be used for charging laptops, phones and other devices.
This EV Is Hyundai Motor’s first model to offer the Over-the-Air (OTA) Software Updates for various controllers. This allows owners to upgrade the car’s controllers for electric devices, autonomous driving, battery, maps (and more) without having to go to a service centre. As such, the systems will be kept up to date and optimised.
In the Korean market, the IONIQ 6 is priced between 55 million – 65 million won (about RM185,000 – RM218.000). Production is to begin production in the third quarter of 2022. Sales are expected to begin before the end of the year with exports to selected markets starting in early 2023.
New Honda models almost always grab a lot of attention and the interest shown by the public actually translates into strong sales that remain constantly high. The HR-V is one such example; even from the time before the first generation was officially launched in Malaysia, it already drew crowds wherever it was displayed. And when it finally arrived in showrooms, even more orders flooded in and placed the crossover SUV in a leadership position in its segment.
After putting around 111,000 units on the road in 7½ years, it’s now time for a new generation and again, there has been the same strong interest that the first generation had. Prior to the launch today, one unit was sent around the country for exclusive previews at selected showrooms and drew a lot of potential customers.
Bookings were accepted from June 9 and with the sales tax exemption set to expire at the end of the month, many did not want to miss the opportunity to save money so they made their bookings right away. By today, Honda Malaysia has received more than 20,000 orders – more than 12 times the monthly sale target the company has set. As such, the waiting period will stretch to at least 12 months!
It’s been a while since a Honda model has had such a long waiting period, the last one in memory being the Accord back in the 1980s. However, the company is uncertain of the actual number that will be taken because there may be cancellations so it can only get an idea of the real demand after the July numbers are reviewed. Those who did book before June 30 will be entitled to the sales tax exemption and save money but for those who do want to get one, the following are the retail prices:
With the success of the first generation, coming up with the next generation must have proved to be a challenge. While maintaining the profile with a coupe-like fastback, the designers took the opportunity to use this generation change to also start introducing a new design language which is a total departure from the previous ‘wing’ theme.
The front appearance is bolder with a new and dominating grille design. As it is a big visual change, some may like it and some may not. But lack of enthusiasm for the new look is likely to fade away in time as it becomes more familiar. It is often the case that there are some designs which are not so well received when a new model is launched but eventually, the negative views diminish. In fact, a designer once said that he would be worried if a new design generated too much excitement at the start because there was a danger it could also become dated quickly. He preferred designs to ‘mature’ and gradually become more accepted amd appreciated over time.
New exterior features include front LED Sequential Turn Signals (the signals ‘move’ as the illuminate), and a full-width LED Taillight Strip which adds a visual signature visible from a distance. Other key exterior features include new LED headlights with DRLs, LED foglights and 18-inch alloy wheels.
Sizewise, the new HR-V measures 4385 mm in length, which is 39 mm longer than its predecessor. The 1790 mm width is similar to the previous RS version, while the roof is 15 mm closer to the road so the profile is more low-slung. The contemporary, uncluttered form has a crisp horizontal shoulderline running from the rear light cluster to the front headlights, generating a sense of forward momentum.
This time round, Honda Malaysia is offering a choice of three powertrains in four variants. There is no longer a 1.8-litre engine and all the powertrains have a 1.5-litre displacement. At the lower end is the HR-V 1.5S which has a 1.5-litre DOHC i-VTEC engine producing 121 ps/145 Nm. The other two variants – the E and V – have the widely used 1.5-litre turbocharged VTEC engine (shown below right) which produces up to 181 ps/240 Nm. The S, E and V variants all use a CVT delivering power to the front wheels.
The top variant, as before, is the HR-V RS which has e:HEV technology with the intelligent Multi-Mode Drive (i-MMD) system. Already available in the City RS, this 1.5-litre hybrid powertrain with 2 motors (above left) generates 131 ps with an impressive 253 Nm of torque. From our experience with its in the City RS, it not only delivers strong performance but can also be very economical because it can run on just the electric motor for short distances, meaning no petrol is used at all. And as the battery pack recharges while driving, the e:HEV approach is the best one for Malaysia at this time, rather than moving to full electric vehicles so quickly.
Honda e:HEV powertrain
Compared to the e:HEV powertrain in the City RS, the one in the new HR-V has received improvements to increase performance. The battery pack in the Intelligent Power Unit has 60 cells, 25% more than the one in the City RS, so storage capacity is greater. The system also generates 20% more power and the CVT has a lower ratio, probably to suit the higher weight of the HR-V.
The chassis is the same as before with MacPherson struts in front and a torsion beam at the rear, a common layout in many of today’s vehicles. Feedback from customers identified certain areas that needed improving in the vehicle dynamics. The improvements have been achieved by small engineering revisions in the suspension, body architecture and electric power steering. Adding reinforcements in some areas has contributed to better rigidity.
The torsional rigidity and spring rate of the steering column has also been increased by 15%, affording a smoother feel during direction changes. Initial corner turn-in is more direct when compared to the previous HR-V, and the overall feel during manoeuvres is much more linear and precise.
At the rear, the compliance bushes have been modified in both construction and design to improve rear wheel control and ride comfort. The liquid-filled bushes have increased damping performance and good low-frequency performance providing excellent primary ride, whilst absorbing certain frequency vibrations to improve secondary ride. In revising the bush design, a flange has been added to reduce lateral movement across the bush.
Noise, vibration and harshness (NVH) are what the passengers constantly experience and making them as low as possible makes a big difference to not just comfort but also the perception of quality. To lower NVH, the engineers focussed on two areas – engine acceleration and road noise. They didn’t just mask the noise and vibrations by using more insulation but also made changes to certain parts or added reinforcements so that the frequencies would become less disturbing.
Contributing to reducing accidents, Honda Malaysia has made Honda SENSING standard in every variant. This suite consists of 9 active safety systems, including Adaptive Cruise Control, and they rely on a camera positioned at the top of the windscreen. The omission of a radar helps to lower cost and to ensure that the camera alone is enough, it has been given a wide forward view (about 100 degrees left to right) and the image processing software is also more advanced for enhanced recognition capability.
The system can identify other vehicles, people and also lane markings as well as gravel and grass edges. The latter is important for the Lane Keeping function which limits the vehicle from drifting out of its lane. On long distances, this feature can help reduce fatigue as the driver does not have to make minor corrections to the steering to stay in the lane.
When driving on slopes, there are also systems that will help the driver. Hill Descent Control, when activated, will manage the speed safely downhill so all the driver has to do is steer to avoid obstacles. There is also an AUTO HOLD function to keep the vehicle motionless on a slope without having to keep the foot on the brake. This is now possible with the electrically-operated parking brake.
Honda LANEWATCH, the innovative camera-based blindspot monitor, is fitted to the V and RS variants. This system shows real-time images of the left side of the vehicle, allowing the driver to spot if there is a motorcyclist or other vehicle coming up. The image is shown on the centre panel and comes on whenever the left signal light is activated.
The compact dimensions of the HR-V allow for only two rows of seats but the legroom is generous, with rear passengers getting 35 mm more space. This is helped by having the fuel tank situated under the centre (an idea which originated with the first Jazz). Like the City Hatchback, the HR-V cabin can be configured in three layout modes – Utility, Long and Tall. In the Long mode, there is a floor length of up to 1.9 metres when the rear backrests are folded down. Along with the high ceiling, this allows for 2 mountain bikes (with front wheels removed) to be stored on board. The Tall mode allows tall items (like plants) to be carried as the floor to ceiling height is maximised by folding the rear seats up. The idea has been used in some Honda models for around 20 years, since it first appeared in the Jazz.
For those who own the RS variant, loading cargo is even more convenient with the handsfree feature that opens the rear door automatically. Just placing a foot under the rear bumper unlocks and raises it and even better, it will close by itself too when the owner has gone further than 2 metres away.
The dashboard has the same clean design with a combination of touch and physical controls. It’s clear now that touch controls are not necessarily ideal for every function so the interior designers have provided rotary controls and pushbuttons for the air-conditioner and ventilation system. These can be operated without having to look, unlike touch controls where you have to look and then focus on an icon – which is not so good for driving safety.
Talking of air-conditioning, besides having two zones so the front passenger and driver can set their preferred temperatures, there is also an Air Diffusion System which is a first for Honda. This introduces a new concept of air conditioning, with L-shaped vents positioned in the top corners of the dashboard that deliver the restorative effects of a natural breeze to all occupants.
The idea was born from the concept of designing light and wind to improve passenger comfort, with nature as inspiration. The new ventilation approach resolves a disparity in traditional vent configurations, where passengers often feel uncomfortable with air blowing directly onto them. When activated by turning a dial, the Air Diffusion System creates a new gentle flow of air which discreetly flows like a soft breeze along the side windows.
The air also travels to the roof, creating a gentle vortex of air that is barely perceptible to passengers. We’re not sure if the breeze will reach the back but the rear passengers will also be comfortable as there are vents closer to them behind the centre console.
Being a Honda, the equipment list can be expected to be extensive with many features thoughtfully included. The infotainment system has Android Auto and Apple Carplay which expands its useability to include apps from smartphones (like Waze and Spotify) while there are 4 USB ports for recharging devices. The driver of the V and RS variants gets 8-way adjustment on their seats and those in the V variant also have paddle shifters. All variants have pushbutton start/stop and also auto locking when walking away (with the engine off).
Except for the S variant, all the other three HR-Vs can be started from a distance with the Remote Start. In movies, such a feature would be used as a precaution in case there’s a bomb under the car (set to go off when the engine starts) but in real life, Remote Start is useful for starting the engine so the air-conditioner can run and cool down the cabin.
For those who like the extra class that leather gives, this is standard for the upholstery in the V and RS variants. For the other two variants, fabric upholstery is provided. Throughout the cabin though, there are many areas where the panels have soft padding for a more premium feel.
Honda CONNECT, a telematics system that provides safety, security and convenience, is provided with the E, V and RS variants. This system can track the vehicle’s position so it can be located if stolen and owners can also set ‘geo-fencing’ so they will be alerted if the vehicle moves out of a designated zone. In the event of a severe collision, an automatic notification will be sent out so that help can be quickly sent. Honda CONNECT also allows the owner to check on the condition of the battery and fuel level without being inside the vehicle, and there will be reminders when routine maintenance is due.
As with other Honda models, there is also the option of adding genuine accessories to personalize the HR-V. Honda Malaysia offers 5 packages with different themes, with prices ranging from RM1,106 to RM3,780. As the cost of these packages would be included in the total price of the vehicle, they would also be part of the financing plan.
The new HR-V is now at Honda dealerships nationwide and if you want to view or test-drive on, locate the nearest showroom at www.honda.com.my.
Yes, the Chinese carmakers are going to be serious rivals to the established brands in due course. While they may have given a poor impression 20 years ago because of low quality, they have improved steadily and now have the volumes to fund R&D to develop their own technologies and invest in the latest advanced manufacturing processes to achieve high quality.
One of the latest examples of this new generation of Chinese cars is the Chery OMODA 5 which has just been launched in China, with exports to begin to many countries including Malaysia. Priced in China between RMB92,900-RMB126,900 (about RM61,300 – RM83,700), the OMODA 5 is a sporty new crossover SUV that was first previewed as the X-C concept at Auto Guangzhou in 2021.
B+ segment
Its overall length of 4400 mm and width of 1830 mm (on a wheelbase of 2630 mm) gives it a slightly larger body that Malaysian rivals like the Proton X50 and Perodua Ativa. So it’s a ‘B+’ segment model but not too big to qualify to be in the C-segment.
The OMODA 5 uses the brand’s ‘Art in Motion’ design language that makes much use of curves and molded surfaces to dynamic aesthetics even when standing still. The body panels are carefully shaped to create an interplay of light and shadow as the SUV moves. The borderless diamond-cut geometric matrix grille extends from the middle to both sides, as if to create a ‘parallel universe where dreams match reality’.
1.6-litre TGDI engine
The OMODA 5 is powered by a Kunpeng 1.6TGDI, the letters signifying that it is a turbocharged engine with direct fuel injection. The 1.6-litre 4-cylinder engine produces 197 ps/290 Nm which goes to the front wheels through a 7-speed dual-clutch transmission. The claimed 0 to 100 km/h time is 7.8 seconds and while on the move, the driver can activate a Super Sport mode for more engaging driving. In this mode, there is also simulated sound to enhance the perception of high performance.
AI in the cockpit
The cabin has Chery’s latest-generation Lion 5.0 AI (artificial intelligence) technology smart cockpit with intelligent technology. AI is used for emotion monitoring and adjustment, while entertainment is managed on a large 24.6-inch display screen. A Sony audio system collaborates with 64-colour rhythmic ambient lighting for immersive audio-visual entertainment.
Besides having European-standard environmental protection technology and ecological design, the OMODA 5’s C-PURE green cabin has a negative-ion air purification and filtration system. This will provide clean air to the occupants, an important consideration these days.
Global product
The Chery OMODA 5 has been designed with youth in mind, and through its technology-rich features, aims to project a new, more vibrant Chery to global consumers. The OMODA 5’s launch marks an important step in Chery’s global brand rejuvenation as it sets its sights on many other markets worldwide,” said Jia Yaquan, Chery Automobile’s Deputy General Manager and General Manager of Marketing.
Besides the OMODA 5, Chery will be returning to Malaysia with the Tiggo 8 Pro and Tiggo 7 Pro, part of the Pro line which has 4 SUV models and one sedan. Chery Malaysia has not indicated when they will have their launches although they should happen before the end of this year. Given how GAC Motors and GWM have started their activities, Chery won’t want to lose potential customers who are keen to try new brands and are drawn to these two newcomers first.
