Piston.my

Latest News

With no risk of rain and a hot sunny day, almost all the drivers chose to start on mediums, except for Ferrari’s Carlos Sainz, Scuderia Alphatauri’s Pierre Gasly and Alfa Romeo’s Valtteri Bottas.

Poleman Charles Leclerc got his Ferrari off to a clean start and already had a slight lead ahhead of the two Red Bulls chasing him into Turn 1. While Max Verstappen was able to grab second position, it was a quick-moving Lewis Hamilton who got ahead of Sergio Perez in the first few seconds. His Mercedes-AMG team mate, George Russell, was also right on the Red Bull’s tail but then, as he eased off, Alpine’s Fernando Alonso suddenly shot past.

Scuderia Alphatauri’s Yuki Tsunoda, who had started from P8, spun and by the time he recovered, the rest of the cars had pulled away and he was right at the back. But a closer look at Tsunoda’s spin showed that Alpine’s Esteban Ocon might have caused it and the Stewards gave him a 5-second penalty. But it would be little comfort for Tsunoda as the damage was great and he had to retire eventually.

Sainz, who started from the back, had moved up 4 places by lap 4 and was prepared to be in ‘overtaking mode’ for much of the race. While Hamilton was having a tough time with Perez, Russell was able to get past Alonso and grab back fourth place.

Verstappen was right up to Leclerc’s tail and determined to capture the lead early, even to the extent of seeming to ignore the need to manage his tyres. His crew, avoiding distractions, only suggested to him to control his pace.

Up to lap 10, the battles at the front saw no changes in positions, with Leclerc staying just ahead and Verstappen not able to find the right opening to make his move. Likewise for Perez who was duelling with Hamilton while Russell was just waiting for the Mexican to make a mistake.

By lap 13, Sainz had entered P10 and was 29 seconds behind his team mate, who was still in the lead. Verstappen’s gap seemed to open up a bit and it appeared that the Red Bull driver might be easing off to hold on to his tyres.

On lap 17, Verstappen pulled off to the pits, stood still for 2.4 seconds to get hard tyres fitted and rejoined in 7th, behind McLaren’s Lando Norris. Alonso was still at 6th, after having passed a few cars early in the race.

And then disaster struck for Leclerc as he crashed into the barriers on lap 18 at Turn 11. He was unhurt and came out of the car as the Safety Car began its duty. It seemed that the car had lost rear traction in mid-corner and at the speed he was doing, he could not recover fast enough. As his car was not obstructing, the Safety Car was able to come in after 2 laps.

By then, Verstappen has moved into the lead and the pressure was on Sainz to get up as high as possible and maximise the points to take home for the team. On lap 23, he was 6 seconds from the leader.

Turn 11 seemed to be a bad corner as Alfa Romeo’s Zhou GuanYu collided with Haas F1’s Mick Schumacher (damaging his rea wing) and the Chinese driver was given a 5-second penalty.

Hamilton was second, 2 seconds behind Verstappen, and the Mercedes-AMG driver had to keep an eye on Perez just behind while trying to close in on the Dutchman. The Ferrari team was also informed that Sainz had picked up a penalty for an unsafe release as he left his bay just as a Williams car was approaching.

As the race reached itsd halfway point, Verstappen had set a number of fastest laps and created a gap of 3 seconds from Hamilton. Both cars were on hard tyres but those on the  Red Bull had 2 more laps than the ones on the Mercedes-AMG, so was that going to be a deciding factor? In 2021, Hamilton had done a 1-stop in the race.

On lap 32, it was still more of a Perez-Hamilton battle than a Hamilton-Verstappen duel.  Pushing hard, Sainz got past Russell into fourth place but it may have taken a toll on his tyres. Behind the top five, Alonso was holding on to his reasonably secure 6th place.

With 15 laps remaining, the teams were trying to guess each other’s strategies and whether or not to try to last till the end. Pirelli was expecting Sainz to come in to get new tyres. Verstappen was 7 seconds ahead of Hamilton and having minor tyre issues but still able to keep going.

On lap 39, Williams Racing’s Nicholas Latifi left the track at Turn 2 after coming into contact with Haas F1’s Kevin Magnussen. Both drivers had to return to the pits as their cars sustained some damage, the Williams seeming to be worse off than the Haas.

Sainz was getting concerned about his tyres and wanted to come in but was told to remain out. And one lap later (lap 42), he was told he could come in just as he had come up alongside Perez and got past into third. But it was short-lived as he came in, finally got new tyres – but had to serve his 5-second penalty – and dropped to ninth. Back to work, while Perez was safely back in third.

The battle between Russell and Perez heated up and at one point, they came in contact. However, there was no attention from the Stewards. The battle was good for Hamilton who could be less concerned about Perez bothering him while he figured out how to get closer to Verstappen who was 9 seconds away.

Sainz, on fresh tyres, was flying and intent on getting onto the podium at least. He was sixth with 6 laps remaining and had Alonso to clear before chasing after a distant Russell. At this point, it looked like the only change would be between Russell and Perez as Hamilton was too far and running out of laps to catch Verstappen.

On lap 49, Zhou again had the frustration of his Alfa Romeo stopping before the end of the race. The Virtual Safety Car (VSC) was activated as the marshals pushed his car off the track.

Just as the VSC went off, Russell made his move and shot past Perez to claim third place with 3 laps remaining. He had timed his surge perfectly but the Red Bull driver was not giving up easily. Sainz was too far back to get any further forward after passing Alonso but might get an extra point for his fastest lap.

While Verstappen comfortably took the chequered flag to win the French GP again, his team mate worked hard all the way to the finish line, trying to regain third from Russell. But time ran out and Russell stayed ahead although the Mexican still didn’t want to accept his place, suggesting that Russell may have exceeded the track limits at Turn 6 and should incur a penalty.

It was a wet race yesterday for the first part of the GAZOO Racing Vios Sprint Cup held at the Sepang International Circuit. But even with the challenging conditions, the pair of Eddie Liew and Putera Adam kept their cool to win the race. The Laser Motor Racing duo finished the 1-hour race well clear of Prima Pearl TD Racing’s Tengku Djan Ley and Mika Hakimi, while in third place was Telagamas Toyota’s Freddie Ang and James Liam Russell.

Laser Motor Racing’s Mark Darwin had led the opening stages of the race when he shot into the lead from fifth place on the grid, with team mate Liew in the second Laser Motor Racing car in close pursuit, followed by Toyotsu Racing’s William Ho and Axle Sports’ Hayden Haikal in third and fourth places, respectively.

2022 Toyota Vios Sprint Cup

2022 Toyota Vios Sprint Cup

Darwin led for 6 laps, but in spite of trying hard, his lead never grew beyond 2 seconds and eventually, he was passed by Hayden in the seventh lap. The position would remain unchanged even after Naquib Azlan took over from Hayden in car #17. With a gap of more than 5 seconds, it appeared that the two young drivers were en route to another textbook finish.

How the outcome changed
But as seasoned racers will tell you, the outcome is never for certain till the chequered flag is waved and 3 laps before the finish, Naquib made a rare mistake when he came into contact with car #68’s Vincent Ng from Team Fokus. The collision sent Ng spinning off the track while a puncture resulted in Naquib having to make an unscheduled pits top that essentially lost the team the race. This promoted Putera Adam, who had taken over from Liew as the second driver, into the race lead.

2022 Toyota Vios Sprint Cup

2022 Toyota Vios Sprint Cup

“I was just trying to run my own race and do my best in the difficult wet conditions,” said Putera who set a blistering pace around the 5.543-km circuit. Naquib’s misfortunes also enabled Tengku Djan Ley to move into podium contention after a sterling drive in the wet. He had clawed up the leaderboard from as far back as 12th place when he took over driving duties from Mika in the 10th lap of the race.

“We had a gearbox issue during the qualifying stint and maybe that turned out to be a blessing in disguise. Mika started the race and he did a great job of holding the pace in his stint. I basically had to put it together, keep my calm and take it to the finish line. It was a great team effort,” said Tengku Djan.

2022 Toyota Vios Sprint Cup

“We had a better car for the conditions today and it was a question of trying to find the fastest line around the track to post the fastest time. The weather was a bit erratic. It was raining heavily in certain sections and it didn’t even rain in some sections. I was trying to keep my cool. I saw Putera gradually pulling away and I was trying to find a quicker line just to keep up with him. It was a good race overall,” he added.

2022 Toyota Vios Sprint Cup

2022 Toyota Vios Sprint Cup

For the pair of Freddie Ang and James Liam Russell, the result was outstanding having started from sixth on the grid. “It was my first time back racing and also my first time racing in the wet. I didn’t bother trying to fight the top two cars. In the first few laps, I was well off the pace and I did my best to just try to follow them and learn my way around the track,” said Russell.

RM60,000 prize money
Held in conjunction with the Malaysia Championship Series, the GAZOO Racing Vios Sprint Cup is a one-make race with 2-driver teams competing in a 1-hour race and vying for total prize monies amounting to RM60,000.

2022 Toyota Vios Sprint Cup

The GAZOO Racing Vios Sprint Cup is run independently of the Vios Challenge but it retains the format of a one-make series whereby competitors drive identical race-prepared Toyota Vios cars with stock standard engine and transmission, as well as suspension, tyres and fuel – to ensure that the emphasis is on racecraft, driving skills and experience.

2022 Toyota Vios Sprint Cup

The second race will be run today (Sunday) and the starting order will be reversed to make things more interesting. Entrance is free to the Grandstand for those who want to see the action at the circuit. But for those who can’t go, you can still watch the race live as it will be broadcast on the Toyota Malaysia Facebook page.

The Father and Daughter racers in the Vios Challenge

Race starts at 3 pm in France/9 pm in Malaysia

From the Red Bull Ring in Austria two weeks ago, the Formula 1 teams have travelled 1,100 kms west to the Paul Ricard Circuit in France for Round 12 of the 2022 world championship. This is the 62nd French Grand Prix that is a part of the Formula 1 World Championship and it was on the calendar of the very first championship in 1950.

However, the Paul Ricard Circuit has not always been the venue of the French GP and including this weekend’s event, has held it 18 times. Other circuits that have hosted F1 rounds have been Reims, Clermont-Ferrand, Le Mans, Dijon and Magny Cours.

Paul Ricard is an interesting track which features no less than 247 possible track configurations – ranging from 800 metres to 5.86 kms (the lap length for this weekend’s race will be 5.842 kms). While it is used for many races, it is also a popular track for testing and it is possible to make it something like Monza or Monaco or a combination of both circuits. There’s also a sprinkler system that can simulate wet weather driving on 64 of the different layouts.

One of the circuit’s special and eye-catching features are its brightly coloured run‑off zones which offer plenty of grip and replace the more usual gravel traps. The blue zone is not especially abrasive and has only a small negative effect on cars going off track, while the red zone close to the barriers has a much coarser texture and slows cars down (and can flat-spot tyres). Both of these distinctive zones use tarmac combined with tungsten to create an abrasive surface that helps reduce car speeds when they exceed track limits.

The circuit itself has been regularly resurfaced with fresh tarmac and provides a high grip level, compared to other tracks in F1. Plus, the tarmac is very dark in colour, which is why it gets so hot in the sun and can reach temperatures approaching 55°C, one of the year’s highest figures. The asphalt is extremely smooth and while smooth tarmac means tyres don’t wear out as quickly, they are much more difficult to warm up. But the normally high temperatures experienced at the track, especially in summer, should help with getting heat into tyres.

“This year’s French Grand Prix takes place nearly a month later than it did last year, when it rained on Sunday morning, so it’s fair to expect warmer temperatures. This year’s generation of tyres and compounds is different and more resistant to overheating than the 13-inch versions used last year, so we’ll have to see how that affects the strategy,” said Mario Isola, Pirelli’s Motorsports Director.

The layout used for F1 racing will challenge teams in optimizing set-ups as there are varied demands. Of the 15 turns, 6 are left-hand and 9 are right-handers. Many of the right-hand corners are long sweeping turns, which puts a great deal of stress on front left tyres. All in all, the Circuit Paul Ricard has a good mix of fast, medium and slow corners.

Defined by long straights, the circuit’s first sector ends in a low-speed complex that requires agility and good traction on exit for the high-speed run to Turns 7 and 8. The faster sequence following the sweeping Signes curve will put more energy through the tyres.

Although the track is generally very smooth, there is one heavy bump. Turn 5 was remodelled for the 2021 season with the intention to make it a slightly banked entry towards the apex, similar to Turn 4 in Austria but in the end, there is now a bump where the track drops away from the car between Turn 4 and Turn 5.

Brake cooling at Paul Ricard is not as critical as at some other circuits, because there is enough track between braking zones to allow pads and discs to cool down sufficiently, so overheating is not a particular problem. Brembo’s technicians agree and on a scale of 1 to 5, it has a difficulty rating of 2, the joint lowest of the season with Silverstone.

Gear positions and cornering speeds of Mercedes-AMG racing cars.

The most demanding braking is on Turn 8, the chicane that bisects the 1.8-km long Mistral straight. The cars come onto it at 319 km/h and brake for 2.12 seconds, covering a distance of 116 before going into the turn at 135 km/h. For 53 laps, the drivers have to exert a load of 141 kgs and during that time will experience a deceleration force of 4.7g.

In the championship standings after half the season has been completed, Charles Leclerc’s win in Austria a fortnight ago closes the gap with leader Max Verstappen, cutting it down to 38 points. The Dutchman’s team mate, Sergio Perez, had bad luck and failure to finish dropped him to third place, 21 points behind the Ferrari driver.

In the Constructors championship, Red Bull Racing still has the lead with 359 points, 56 points ahead of the Italians. The British-based Mercedes-AMG PETRONAS Team is some way down with 237 points.

Showcars or concept cars used to be exercises in fantasy, showing the public the sort of vehicles people would be travelling in many decades in the future. Sometimes they got a bit outrageous with fancy ideas that would never become reality. But over time, concept cars have become previews of near-future products and designers use them to gauge response to some of the ideas they are exploring.

Cadillac’s latest showcar, called the CELESTIQ, has been conceived for that purpose – to present the brand’s vision of innovation and purpose in a 3-dimeensional form that will be the basis of its all-electric flagship sedan in future.

202x Cadillac CELESTIQ concept EV

“The CELESTIQ showcar is the purest expression of Cadillac,” said Magalie Debellis, Manager, Cadillac Advanced Design. “It brings to life the most integrated expressions of design and innovation in the brand’s history, coalescing in a defining statement of a true Cadillac flagship.”

Looking to the past for ideas
In developing the showcar, the design and engineering teams immersed themselves in the artisanship and customization that defined early Cadillac sedans such as the bespoke V16 powered coaches of the pre-war era, and the hand-built 1957 Eldorado Brougham. The CELESTIQ is the culmination of that heritage, created today with innovative production methods and new technologies.

202x Cadillac CELESTIQ concept EV

1957 Cadillac Eldorado Brougham was a limited edition model, with only 400 cars built.

“Those vehicles represented the pinnacle of luxury in their respective eras, and helped make Cadillac the standard of the world,” said Tony Roma, Chief Engineer. “The CELESTIQ showcar — also a sedan, because the configuration offers the very best luxury experience — builds on that pedigree and captures the spirt of arrival they expressed.”

The designers drew further inspiration from classic architecture such as the mid-century masterpieces of architect Eero Saarinen, along with other iconic American designs, which made era-defining statements when introduced and endured with distinctive timelessness.

202x Cadillac CELESTIQ concept EV

Clean-sheet development
Realizing and infusing those influences within a General Motors’ Ultium-based EV architecture enabled a clean-sheet expression for the CELESTIQ that considers the entirety of travel as a curated experience — one intended to evoke an emotional response. The result is a car that makes a magnetic first impression and cultivates a permanent personal connection.

“We’ve combined the beauty of function with the beauty of form,” said Laetitia Lopez, Creative Designer, Cadillac Colour and Trim. “We had to reconsider all aspects to immerse the customer, all of their senses, and create a connection with the vehicle through the finest genuine materials, exceptional detailing and advanced technology.”

202x Cadillac CELESTIQ concept EV

The show car previews some of the materials, innovative technologies and handcrafted attention to detail harnessed to express Cadillac’s vision for the future. Highlights include 5 high-definition, advanced LED interactive displays, including a massive 55-inch-diagonal advanced LED display, along with expected industry-firsts such as a variable-transmission Smart Glass Roof and Ultra Cruise. The latter will be General Motors’ next evolution of available handsfree driver assistance technology which Cadillac plans to offer with the CELESTIQ.

202x Cadillac CELESTIQ concept EV

Smart Glass Roof
The Smart Glass Roof features Suspended Particle Device technology that allows for 4 zones of variable lighting. This allows passengers to fine-tune their cabin experience for completely personalized comfort and visibility. Additionally, the huge advanced LED display introduces a passenger display with electronic digital blinds, an active privacy technology which is designed to allow passengers to enjoy video content while blocking it from the view of the driver. While they are previewed on the showcar, these technologies and others will make CELESTIQ the most advanced vehicle ever from Cadillac when it goes on sale.

202x Cadillac CELESTIQ concept EV

The launch date for the CELESTIQ production model has not been indicated but GM is investing US$81 million (about RM360.6 million) to support its assembly at GM’s Global Technical Centre the heart of the company’s engineering and design efforts. The CELESTIQ will be the first production vehicle built there since the facility’s inauguration in May 1956.

Cadillac InnerSpace concept reimagines the luxury experience of motoring in future

The next-generation Ford Ranger has arrived in Malaysia and also joining the range before the end of the year will be the new Ranger Raptor. Developed by Ford Performance, the Ranger Raptor has proven to be the ultimate Ranger which blends raw power with mechanical and technical precision to create the most advanced Ranger ever.

The big news for performance fans is the introduction of a new twin-turbo 3.0-litre EcoBoost V6 producing up to 392 ps at 5,650rpm and 583 Nm at 3,500rpm tuned by Ford Performance. However, the 2.0-litre Bi-Turbo diesel 4-cylinder engine will also be available in markets where a smaller displacement is more practical. Malaysia would be one of them.

The 2-litre Bi-turbo engine with high-pressure Commonrail Direct Injection is already a familiar powerplant as it is used in the latest Ranger Wildtrak. With two turbochargers, the engine (for the Raptor) pushes out 213 ps, with a massive 500 NM of torque.

All that power and torque flows through Ford’s own 10-speed automatic transmission which has been specially calibrated to work perfectly with the turbocharged engine. Not only is power delivery smooth but gear changes are also quick and precise with advanced programming to ensure the right gear for every situation.

With an electronically-controlled active exhaust system that amplifies the engine note in 4  selectable drive modes (Quiet, Normal, Sport and Baja), the Raptor’s vocal character ranges from mild to wild. Drivers can choose their preferred engine sound by pressing a button on the steering wheel or by selecting a drive mode.

While there are similarities, the new Ranger Raptor has a unique chassis when compared to latest Ranger. A series of unique mounts and reinforcements, for elements including the C-pillar, load box and spare wheel, as well as unique frames for the jounce bumper, shock tower and rear shock bracket all combine to give the vehicle much more capability in extreme conditions.

The suspension is completely redesigned, with all-new tough, lightweight aluminium upper and lower control arms, long travel front and rear suspension and refined Watt’s link rear end designed to deliver more control across rough terrain at high speed.

The new suspension upgrades in the Ranger Raptor make the most of the new FOX Live Valve dampers. The suspension adapts in real time to enable exceptional on-road body control while absorbing corrugations and bigger ruts off-road with ease ensuring maximum control and performance.

Soaking up those humps and bumps are next-generation FOX 2.5-inch Live Valve Internal Bypass shock absorbers with cutting-edge control technology offering position-sensitive damping capability. These shock absorbers are the most sophisticated ever on Ranger Raptor and are filled with Teflon-infused oil that reduces friction by around 50% compared to those on the previous Raptor.

While the hardware is FOX, the tuning and development work was carried out by Ford Performance using a mixture of computer-aided engineering and real-world testing. Everything from adjusting the spring rates to setting the ride height, valve tuning and honing the ride zones was performed to create the perfect balance between comfort, control, stability and traction on-road and off-road.

2022 Ford Ranger Raptor

In addition to working with the drive modes, the system works in the background to prepare the Ranger Raptor for different conditions. As the shocks compress, different zones within the bypass system give exactly the amount of support needed for the travel being used and work in reverse as the shocks rebound back to full height.

The Ranger Raptor’s ability to tackle rough terrain is further enhanced with tough underbody protection. The front bashplate is almost double the size of the standard Ranger bashplate and made from 2.3 mm-thick high-strength steel. This bashplate, combined with the engine undershield and transfer case shield, provides protection for key components like the radiator, steering system, front cross member, engine sump and front differential.

2022 Ford Ranger Raptor

For the first time, the Ranger Raptor gets an advanced permanent 4-wheel drive system with an all-new electronically controlled on-demand 2-speed transfer case, combined with front and rear locking differentials, a feature that hardcore off-roaders will appreciate.

Unlike other pick-up trucks in the market with bodykits to just give a sportier image, the Ranger Raptor’s was specially developed by Ford Performance. The flared fenders accommodate a choice of two muscular 17-inch wheel designs, one with beadlock capability, and each wrapped in BFGoodrich all-terrain tyres.

Functional vents, aero features, and tough, new-design cast aluminium side steps help enhance the look and functionality of the truck. At the rear, LED taillights provide a signature link to the front, while the precision grey rear bumper features an integrated step pad and towbar that is tucked up high to aid the truck’s departure angle.

Inside, the theme continues to emphasize the off-road performance and high-energy nature of the exterior. The cabin features all-new, jet fighter-inspired sports seats – both in the front and rear – that are not only more comfortable but more supportive during high-speed cornering.

When the first Ranger Raptor was launched in Malaysia, its RM209,000 pricetag was thought to be excessive. But much to SDAC’s surprise, the model was in high demand. It was just the thing for the hardcore types who could get a factory-ready truck with genuine high performance – and with a warranty too.

The Next-Generation Ford Ranger Is Here!

One of the frustrations for engineers is that there are so many regulations they must meet when developing a model for sale. There are emission regulations and safety regulations to comply with otherwise the car cannot be registered for use on public roads.

With racing cars, it’s a bit different and while there are also regulations, they are generally focussed on safety while allowing more freedom in performance. This is why manufacturers sometimes have models which are strictly for track use (or on private roads) and then the engineers can go all out to achieve maximum performance. It’s a dream project for any engineer.

At Maserati, there’s such a dream project now in progress, codename Project24. This is going to be a super sportscar and it is based on the MC20. Besides inheriting the main specification, the V6 Nettuno 3-litre dry sump engine will have new turbochargers to raise its power out to 740 ps. The drivetrain will consist of  6-speed sequential racing transmission with a racing clutch, and a mechanical limited-slip differential.

2022 Maserati MC20 Cielo

Maserati MC20

Besides suspension uprating, there will also be a carbon-ceramic braking system by Brembo and slick tyres specially chosen for racing, as well as FIA-approved safety features. The passenger’s seat will be an optional item but air-conditioning will be installed.

Based on the brand’s obsession with lightness, the target weight of the sportscar will be below 1,250 kgs. With the higher output and lower weight, a power-to-weight ratio of approximately 1.69 kgs/ps will be possible.

The bodywork has also be lightened with carbonfibre cladding. Aerodynamic studies in the wind tunnel will provide guidance on how to make the body more slippery, and there will be adjustable front and rear wings.

The Project24 will not be a one-off car but will be produced in 62 copies. Each owner will have assistance in getting the car on the track and also support services. Of course, how many owners will race it on a track remains to be seen but it will certainly become an instant classic collector’s item.

David Beckham creates a Maserati MC20 that is truly his own

Archive

Follow us on Facebook

Follow us on YouTube