Home - Piston.my

Porsche begins vehicle assembly in Malaysia, the first time outside Germany

As reported in August last year, Porsche will assemble its vehicles in Malaysia, the first time that the sportscar maker is carrying out such activity outside Germany. It has not built a new factory in Malaysia but is using the existing Inokom Corporation complex for its facility.

The official launch of the facility, which took place today, is an event of great significance and is the result of close collaboration with Sime Darby, which represents Porsche with its Sime Darby Auto Performance unit. It also owns the Inokom factory, located on a 200-acre site in Kulim, Kedah which began operations in 1997. The factory first assembled Renault and Hyundai vehicles and under Sime Darby ownership, products from BMW, MINI, Hyundai and Mazda are also assembled at the complex today.

*The Inokom factory in Kulim, Kedah, is the first site outside Europe to manufacture Porsches.*

“We are very honoured by Porsche’s continued trust in Sime Darby, as we deliver a product consistent with Porsche’s highest standards for quality, performance and driving experience. The facility, which is 100% staffed by highly skilled Malaysians, not only supports the growth of our businesses across the automotive value chain in Malaysia; but also creates a pipeline of jobs to empower the local community,” said Sime Darby Berhad Group CEO, Dato’ Jeffri Salim Davidson.

“The new assembly site in Malaysia meets specific market needs and operates alongside Porsche’s established network of production sites in Europe. In particular, it meets comprehensive quality standards set forth by Porsche when assembling Porsche sportscars,” said Albrecht Reimold, Member of the Executive Board for Production and Logistics at Porsche. “Additionally, the facility was built alongside our production philosophy: smart, lean and green.”

With this in mind, Porsche has designed its local assembly facility to meet high sustainability standards: on the roof, solar panels provide all the power needed for operations, while rainwater harvesting technologies ensure wastewater is kept to a minimum.

The Sime Darby local assembly facility has a team of highly skilled and 100% Malaysian talent, all of whom have received comprehensive training from Porsche. The assembly is further supported by a network of local suppliers and service providers in the area, empowering the future of the local community with job opportunities, upskilling prospects, and potential for further expansion.

Porsche will start with the Cayenne, a popular SUV model which is now in its third generation. The units assembled at Inokom will be for sale only in Malaysia although it is likely that the carmaker will be looking at exports later on. After all, with AFTA (the ASEAN Free Trade Agreement) allowing duty-free exchange of vehicles within ASEAN countries, it will be advantageous as prices can be more attractive and competitive. However, to qualify for this benefit, at least 40% of the vehicle’s content must be sourced from within ASEAN so that may require a bit more time to reach.

*One of the first locally-assembled Cayennes undergoing final checks.*

While it may seem that local assembly is simply a matter of picking a model and putting it into a box in disassembled form for assembly in another country, the process is actually more extensive. It has to be engineered for local assembly, taking into account the level of automation at the facility and capabilities of the workforce. In as far as being suitable for local conditions, that would already be done as Porsche has been selling the Cayenne locally since it was first introduced in the early 2000s.

For Porsche too, this is something new and the company probably has to create some new departments to handle the processes for assembly in Malaysia. Preparation of the completely knocked down (CKD) packs with all the parts is a specialised activity and something Porsche has never had to do before. Of course, it will probably be able to draw on the knowledge and experience from other members in the Volkswagen Group which have been assembling in other countries for decades.

The locally assembled model comes with an elevated and enhanced standard equipment range specified exclusively for the Malaysian market, with a specially curated Porsche Exclusive Manufaktur option package and a special Porsche Design timepiece available for further personalisation.

Another initiative by Porsche in Malaysia is helping to establish a recharging network for electric vehicles. Porsche Asia Pacific and Shell have collaborated to set up high-performance charging (HPC) stations along the North-South Expressway. This is a first in Southeast Asia and Shell’s first cross-country EV infrastructure in the region, enabling EV owners to drive from Singapore up the west coast of Peninsular Malaysia to Penang and on to Thailand. Additionally, HPCs are already in place at authorized Porsche dealerships in the country.

For more information on Porsche products and services in Malaysia, visit www.porsche.com.my.

First High-Performance Charging Station of Shell and Porsche Asia Pacific collaboration opens in Johor

Naza Italia introduces Ferrari 296 GTB PHEV, priced from RM1,228,000

Demands to address climate change by becoming carbon-neutral are strong and carmakers, whose products are identified as contributors to climate change because of their exhaust emissions, need to do their part. Electrification is the quickest solution that allows vehicles as we know them to still be used without causing more pollution.

Ferrari, like other sportscar makers, can’t avoid the electrification trend of the auto industry. In fact, over 10 years ago, it was already examining hybrid technology and developing such powertrains. And with Formula 1 moving into the hybrid era, development accelerated as the company has long been a participant in the sport.

Thus far, the company has already put a few hybrid models into the market – like the LaFerrari and SF90 Stradale – and with the 296 GTB, which was launched in the middle of last year, represents an evolution of their mid-rear-engined two-seater Berlinetta with a hybrid engine.

This model is the latest offering from Naza Italia in Malaysia which has priced it from RM1,228,000 (excluding all duties and insurance). As with other new Ferraris officially sold by the importer, there’s a 7-year maintenance programme included. Service intervals are at 20,000 kms or once a year, with no mileage limits.

All-new hybrid V6 powertrain
The hybrid powertrain of the 296 GTB incorporates a 120° V6 (553 ps output) coupled with one electric motor that adds 122 kW (166 ps), giving a total system output of 830 ps. Having a displacement of 2992 cc, it’s the first 6-cylinder engine installed on a Ferrari roadcar although the brand has had V6 engines going as far back as 1957 but only for its racing cars (its Formula 1 racers have had V6 hybrid architecture since 2014). Needless to say, technologies developed for the hybrid racing cars has been used for the 296 GTB powertrain.

The hybrid powertrain is a plug-in (PHEV) type which allows for external recharging and a high-capacity 7.45 kWh lithium-ion battery pack. Running on just electric power, Ferrari claims that a range of up to 25 kms is possible.

The new V6, which has an 8-speed DCT, is of an entirely new development and engineered specifically for the car. It’s the first Ferrari to feature the IHI turbos installed inside the vee of the engine. Aside from bringing significant advantages in terms of packaging, lowering the centre of gravity and reducing engine mass. It sets a new specific power output record for a production car and the maximum power output puts it at the top of the rear-wheel drive sportscar segment.

Aerodynamic innovations
Besides the powertrain, the 296 GTB also has aerodynamic innovations that include, for the first time, an active device is being used not to manage drag but to generate extra downforce. The LaFerrari-inspired active spoiler integrated into the rear bumper allows the 296 GTB to generate a high level of rear downforce when required – up to 360 kgs at 250 km/h in high- downforce configuration with the Assetto Fiorano package.

The Aero calipers for the brake system have ventilation ducts integrated into their castings. This brake cooling concept requires a dedicated duct to correctly channel cool air coming in through the air intakes on the front bumper through the wheelarches. In the case of the 296 GTB, the intake has been integrated into the headlight design.

From a chassis perspective, the car’s wheelbase is 50 mm shorter than previous Ferrari berlinettas, giving positive implications to the dynamics. Because of the added weight of the hybrid system, much attention was paid to lowering weight for an optimum balance and various solutions were used. It helped that the V6 is 30 kgs lighter than the V8s used in other berlinettas and along with use of lightweight materials, the resultant dry weight is 1,470 kgs.

Evolved from SF90 Stradale
As with the newer Ferraris, the cabin shows greater ‘digitisation’ and uses the new concept of an entirely digital interface which was first adopted by the SF90 Stradale. It shows a clear break with the past and presents new technology in a sophisticated way. However, the cleaner layout also allowed the designers to create a pure, minimalistic environment for the occupants.

Exclusive Italian leather trim to the seats and trim is further enhanced by the noble technical materials used on the functional components. The sculptural door panels are seamless continuations of the dashboard in terms of both materials and colour. Incidentally, when the engine shuts down, the instruments also go black, enhancing the minimalist look of the cabin.

For customers who want to experience the full performance of the car, the Assetto Fiorano package is available and provides significant weight reduction and aero content. It includes special GT racing-derived adjustable Multimatic shock absorbers, high downforce carbonfibre appendages on the front bumper, a Lexan rear screen, and more extensive use of lightweight materials such as carbonfibre for both cabin and exterior.

Assetto Fiorano package
The Assetto Fiorano package (shown on the car below) involves much more than simply replacing elements. Some components require the standard basic structure to be redesigned, including the door panel, resulting in an overall weight-saving of 12+ kgs. This is therefore something that is specified when ordering the car so the necessary items are added at the factory during assembly.

2021 Ferrari 296 GTB — *Ferrari 296 GTB with Assetto Fiorano package.*

Click here for other news and articles about Ferrari.

F1/Round 2: Highlights and Provisional Results of 2022 Saudi Arabian Grand Prix

The second round of the 2022 Formula 1 World Championship has not been smooth running since the weekend began. First there was the missile attack on an oil depot just 11 kms away from the Corniche Circuit and although many drivers were reluctant to continue through the weekend, they were convinced to do so after assurances from the Saudi Arabian authorities that they would be safe. The Houthis were also said to have assured that they would suspend attacks for 3 days, perhaps understanding a bit about global perception if anything were to happen to F1 participants, even accidentally.

Then there was the nasty accident when Haas F1’s Mick Schumacher hit a wall and had to be hospitalized. Fortunately, he’s okay but he can’t race. And then for Scuderia AlphaTauri’s Yuki Tsunoda (already placed last on the grid as he did not qualify), his race ended before it even started as his car lost power while he was driving it to the start.

[Click here for revised starting grid positions]

When the race got underway, Sergio Perez got off the a good start as his Red Bull team mate Max Verstappen raced past Ferrari’s Carlos Sainz leaving the grid. Many were watching Lewis Hamilton who had been in 16th place after qualifying, and then repositioned two places up after McLaren’s Daniel Ricciardo was given grid penalities. Hamilton had also made a good start and moved 2 places up in the early stages of the opening lap. Alfa Romeo’s Zhou, however, seemed to slip backwards a place or two at the start, bumping into Ricciardo as well.

On lap 5, the two BWT Alpine drivers began fighting each other to move into sixth place. Fernando Alonso had attempted to get past his team mate who was unwilling to let him through. Alfa Romeo’s Valtteri Bottas was closing in and watching the tussle and looking to take advantage of it to get past but Ocon held him back too. That little battle between Ocon and Alonso can’t have pleased the team boss.

The Alpine battle was helpful for Mercedes-AMG’s George Russell who had moved one position up from starting sixth. He was about 12 seconds back from the next car (Sainz) and could concentrate on steadily moving closer with a 10-second gap behind him on lap 12. By then, his team mate Hamilton had moved into 11th place.

Zhou had managed to get up to 13th but on lap 13, he had overtaken Williams’ Alexander Albon whose rear tyres were gone. The pass was done off the track and the Stewards spotted it and gave him a 5-second penalty for that.

Lap 16 saw the first accident as Williams’ Nicholas Latifi went into the barriers near the final corner. This brought out the Virtual Safety Car (VSC) and many drivers took the chance to head to the pits for a tyre-change. Perez too came in, which let Leclerc take over the lead as the VSC was replaced by a real Safety Car to manage the flow while the damaged racing car was removed. At least 3 cars (Hamilton among them) did not come in and they had all started on Hard tyres.

The Safety Car left the track on lap 20 and racing resumed with Leclerc in the lead and Verstappen almost in his slipstream. A frustrated Perez was third, also not far from the front and although he tried, he was unable to stop Sainz from getting past as well and instead watch out for Russell coming up. Incidentally, both Ferraris had switched to Hard tyres when they came in.

Magnussen didn’t give up trying even after Hamilton had passed him and interestingly, both cars were still on their starting Hard tyres after more than 30 laps as they had not gone in during the Safety Car period for a change. Aston Martin’s Nico Hulkenberg, running in 14th, was the only other driver who was still running on starting tyres.

As lap 37 started, Alonso’s car seem to drop back with a noticeable reduction in speed. After having made it past Magnussen, he very quickly slipped back down the field and then radioed that the Alpine had no power. He tried to roll back to the pits but could not and parked so the VSC came out.

Then Ricciardo also reported that his McLaren had lost power and he had to stop right at the pit entrance, blocking it to Hamilton who was planning to come in. Bottas had come in earlier and not departed so he too retired. The VSC was kept active for another few laps as efforts were made to clear the Alpine.

9 laps remained when the VSC went off and Hamilton rushed into the pits to get Medium tyres. When he rejoined, he was just behind Magnussen who was in 11th.

On lap 43, Verstappen went into attack mode and swept past Leclerc, but the Ferrari driver did not give up easily and fought back to regain the lead. Behind, the other Red Bull with the Mexican in it was also duelling with Sainz. Much drama as the race was in its final laps.

There was last-minute drama as Albon and Aston Martin’s Lance Stroll came into contact and the yellow flags came out. But it was a close fight as the leaders exchanged positions and Verstappen seemed to hold the lead better. And then it was over – Verstappen got across the finish line half a second ahead to win the 2022 Saudi Arabian Grand Prix.

Sono Motors to start selling Sion solar energy vehicle from 2023, priced from 28,500 euros (about RM132,000)

Most of today’s motor vehicles are powered by engines which run on fossil fuels – petrol, diesel, natural gas – and apart from causing pollution from the exhaust gases that are by-products of combustion, there is also the problem of diminishing fuel supplies. The fuels come from deep underground and were formed millions of years ago from dead plants, dinosaurs and other living creatures. So there is a specific quantity of these fuels underground and while there are varying predictions on how long they will last, the fact is they will eventually be finished.

The auto industry has understood this for a long time and has searched for alternative fuels to use, preferably those which can be renewable. At this time, some approaches using electricity and hydrogen are already in use in hybrid and fuel cell vehicles and while they are not necessarily the answers, they are helping to slow down the rate of consumption of fossil fuels so that new technologies can be developed that do not need such fuels.

Sunshine has energy too and technologies have already been developed to collect sunshine and convert to electricity which can be used for various purposes, like water heaters in the home or powering machinery at factories. It used to also be a dream to be able to use solar energy to power cars but the technology has been slow to advance, and it takes a huge amount of conversion to generate enough electricity for such a purpose as propulsion.

Nevertheless, the technology has reached a stage today where it is possible to at least use sunshine for cars though not necessarily directly powering the electric motors. The electricity that is converted from sunshine can go into a storage battery which then provides electricity for the motors to run. There are a number of manufacturers which have already developed prototypes and some are on the verge of commercializing them for sale to the public.

Sono Motors, based in Germany, is one of the companies with a solar energy vehicle (SEV) almost ready to be delivered to customers. In fact, its SEV known as Sion has entered the validation stage this month with over 30 units to undergo real-world testing in Europe and the USA. The company plans to start producing 43,000 cars a year and the total production volume is expected to be 257,000 units over a 7-year period. The former SAAB factory in Sweden will be used as the production facility.

The Sion has been a dream of the Sono Motors founders for at least 10 years, but they only started crowdfunding to implement a project in 2016 and 2017 where they collected over 2 million euros (about RM9.25 million). By January 2021, they presented their first prototype of the Sion with the design that will be used for the production model.

While the design is fairly conventional, key to the technical aspect (as with any electric vehicle) is the battery pack to power the 120 kW electric motor. Sono Motors has opted for a more powerful 54 kWh battery for the Sion which is a lithium iron phosphate type (pictured above) considered to be one of the safest on the market, and also does not use cobalt, nickel and manganese. It is expected to have a lifespan of up to 3,000 cycles, or up to 900,000 kms. The battery can be recharged quickly at outlets of up to 75 kW.

A total range of up to 305 kms is claimed, with additional range provided by the solar panels which is a weekly average of 112 kms (245 kms per week at peak). There are 248 solar cells on the roof which can generate peak power of up to 1.2 kW.

“The growing EV market is generating enormous demand for longer-lasting, more sustainable batteries. This enhanced battery enables Sion drivers to extend the time between charges, whilst reducing the charging time itself. This effectively optimizes the Sion to deliver easy and affordable sustainable mobility for everyone,” said Markus Volmer, Chief Technology Officer at Sono Motors.

The company has also developed its own wall charging station or Wallbox which will be affordably priced. Being bi-directional, it can be used for home charging of the Sion as well as for supplying electricity from the car for use in the home or even to transfer to the local power grid. The Sion is thus a mobile powerplant that can not only reduce costs for home-owners but can also provide power during emergencies when supply is cut.

Older motorists will recall the days when they used to carry out simple maintenance tasks themselves. Today, however, there is less to do and most of the time, maintenance is done at service centres. Sono Motors intends to bring back the ‘DIY culture’ with the Sion to keep running and repair costs as low as possible. Standard replacement parts can be changed by the owner but for work involving high-voltage parts (which can have some risk), owners will be advised to send their car to authorized service centres.

The interior has a simple functional layout like any of today’s hatchbacks. Two tablet-style displays provide information on the car’s operation as well as the infotainment system. A unique design feature on the dashboard is the insertion of Icelandic moss, said to offer certain health benefits. The owner can connect to the car via Apple Carplay or Android Auto, and the Sono app allows remote control of the air-conditioning system or to check the battery status.

If everything goes according to plan, the first customers will get their cars sometime in 2023. To date, the company says over 15,000 orders have been received (along with downpayments) for the car which is to be priced from 28,500 euros (about RM132,000).

Free sunshine helps Proton save up to RM5.85 million on electricity costs

F1/Round 2: Preview and Starting Grid for 2022 Saudi Arabian Grand Prix

Race starts in Jeddah at 8 pm/1 am (Monday) in Malaysia

While the COVID-19 pandemic of 2020 caused cancellations and rescheduling of the rounds of Formula 1 World Championship, there have been many other times when certain rounds have not been run in the past. However, they were not due to conflicts or political issues in the host country, with the exception of the 2011 Bahrain Grand Prix which was cancelled when anti-government protests (inspired by the ‘Arab Spring’) led to concerns about security for the F1 participants.

This year, the conflict in Ukraine has seen the termination – not just cancellation – of the Russian Grand Prix in Sochi by Formula 1 as a response to the invasion of Ukraine. Yesterday, the second round of the 2022 championship in Jeddah, Saudi Arabia, was also the subject of security and safety concerns after an Aramco oil storage facility just 11 kms from the circuit was attacked by Yemen’s Houthis. However, after much discussion with government agencies and the teams, it was announced that the race would go on as there were sufficient assurances of protection.

“We have received total assurance that the country’s safety is first,” said Formula One CEO, Stefano Domenicali. “So they have in place all the systems to protect this area, the city, the places where we are going. So we feel confident and we have to trust the local authority in that respect.”

“The attacks had targeted economic infrastructure and not civilians. We have the assurance from a high level that this is a secure place, the whole thing will be secure and let’s go on racing,” added FIA President, Mohammed Ben Sulayem.

This second round of the 2022 championship is the Saudi Arabian Grand Prix and it is the second time the event is being run at Jeddah where the 6.174-km long Corniche Street Circuit has been created. Like the Bahrain round last weekend, this 50-lap race will be run after sunset with over 600 lights providing illumination (connected by 200,000 metres of cable and fibreoptic lines).

Very fast circuit
The young circuit has proven to be one of F1’s fastest circuits (and it also has the most corners this year). At an average speed of 253.9 km/h, Lewis Hamilton’s pole lap last year is second on the current calendar, behind Monza. It trails the Italian track, Silverstone (pre-2010 layout) and the Osterreichring in the all-time list.

A number of revisions have been made, mainly at improving the sight-lines for the drivers. This has been done by moving the barriers further back. The track at the final Turn 27 has been widened to 12 metres, and that could mean a quicker lap time than last year.

However, as will be the case at every track this year, the redesigned cars for 2022 will require understanding of the new demands. With the walls close and the stakes high, judgment and precision will be key factors for victory.

*Haas F1’s Mick Schumacher was going flat out in the second qualifying session and crashed into the wall at Turn 12. He was conscious when extracted from the car and taken to hospital.*

*Cornering speeds and gears used by the Mercedes-AMG W13 racing cars for the 27 corners of the circuit.*

“The Jeddah circuit marks a completely different challenge compared to the opening Grand Prix in Bahrain due to the diverse track characteristics, both in terms of layout and asphalt. Drivers will also use a softer range of compounds this weekend to cope with the specific demands of the track, which is nearly as quick as Monza. The teams have no experience of these tyres and cars on the circuit, and conditions could be somewhat different from last time in Saudi Arabia just 4 months ago – with the race now being held at a different time of year and a few track modifications in store,” said Pirelli’s Motorsport Director, Mario Isola.

Brembo supplies all teams
The Brembo Group is supplying all the teams with its calipers, the first time since 1975. All 20 cars will have new nickel-plated and machined from billet 6-piston calipers, the maximum number allowed by the regulations. Five of the teams will also use by-wore units to manage rear braking, allowing balancing of braking forces between front and rear wheels.

Brembo engineers have also worked with each team to customize many of the brake systems because each racing car is set up differently. Some teams opt for lighter and less rigid calipers, while others choose stiffer, heavier set-ups; so the weight/stiffness ratio has to be optimized for each brake caliper. In-wheel sensors keep the team’s engineers informed of the disc and caliper temperatures at all times so they and the drivers can regulate and optimize braking performance.

Some of the new regulations have affected brake disc design. Until 2021, discs could be pierced with up to 1,480 holes of 2.5 mm diameter. This year, the requirements allow for between 1,000 and 1,100 holes at the front and around 900 at the back, compared with 1,050 holes previously. The updated rules also impose a new minimum diameter of 3 mm. This means that while disc thickness stays the same, there will be fewer and larger holes, reducing cooling ability.

Perforated brake pads have also been banned this season, so Brembo is offering teams a choice of two alternative configurations. In terms of weight, the 2022 braking system is around 700 gms heavier per wheel, adding almost 3 kgs to the total weight of cars compared to last season.

Changing dominance?
The new era of F1 has already lived up to expectations that the dominance of Mercedes-AMG and Red Bull Racing can be challenged by others, and Ferrari’s victory in the first round showed this. While the reigning champions Mercedes-AMG will be looking to do better than third (and not from the misfortune of others), Red Bull Racing has revealed that the sudden power failures to both its cars in the closing laps was because of a fault in fuel delivery which they do not expect to happen again.

Haas F1 had a surprising performance without Nikita Mazepin around (not that he contributed any points last year) as Kevin Magnussen finished fifth, and Mick Schumacher was just one position short of the top 10 finishers. George Russell also did well in his first official drive with the Mercedes-AMG team (second if you include the stand-in drive last year), while the tenth placing by newcomer Zhou GuanYu was commendable for his very first F1 race.

Rolls-Royce Motor Cars Dubai commissions the Carbon Veil for The Gallery in the Phantom

Unique to the latest Rolls-Royce Phantom is an area of the dashboard called The Gallery. It is a glass enclosure running almost the entire width of fascia and it has been incorporated to house bespoke artistic creations inside the limousine. The owners of the Phantom can insert whatever they wish as part of the personalization of their limousine and Rolls-Royce dealerships also come up with some creative ideas for their customers.

Rolls-Royce Motor Cars Dubai is one of them and it has commissioned the Carbon Veil for the Phantom Gallery. The work of art was designed by the Rolls‑Royce Bespoke Collective in England and realized by artist and sculptor Alastair Gibson, who combined knowledge and expertise gained in Formula 1 to create his carbonfibre masterpieces.

The Carbon Veil took 2 years to create and unlike most automotive applications where just 3 or 4 layers of carbonfibre are used, no fewer than 150 sheets were permeated with resin and compressed to form a single, solid billet for the Carbon Veil. The construction technique is genuinely ground-breaking, with the result being ultra-stylish, contemporary and beautiful.

“It required a huge amount of experimentation to produce the Carbon Veil Gallery. The main challenge in creating the shape was ensuring that the weave of the carbonfibre remained horizontal and parallel throughout. It had to be perfect – because this is a Rolls‑Royce,” said Gibson.

As an original work of art, the Carbon Veil introduces a highly contemporary note to the Phantom’s interior. Its sharp, angular surfaces and the distinctive woven surface are synonymous with innovation, technology and performance. Depending on the customer’s preference, the carbonfibre is finished in either clear or matte lacquer which brings out the weave pattern and protects it from harmful ultraviolet rays. The whole piece is sealed under a single pane of glass.

The Gallery is a space protected behind glass. This space affords the opportunity to introduce sharp and aggressive forms, which are unprecedented for the interior of a motor vehicle. The design of the faceted milled carbonfibre sculpture was originally inspired by the angular, aggressive, stealthy shapes of the 118 WallyPower (a luxury yacht said to cost £14 million).

Each Phantom Gallery is individually assembled in the Clean Room at the factory. Completed in 2020, this medical-grade facility provides a 100% sterile environment where Bespoke items and other delicate components can be produced entirely free of dust and particles.

The gunmetal exterior of the car is bolstered with an iced finish with gunmetal contrast bonnet, while the coachline and waftline are accented in a vivid mandarin orange. At the helm of the bonnet proudly stands the retracting Spirit of Ecstasy crafted from carbonfibre.

Within the interior, the anthracite brightwork provides moments of contrast, along with the colour-keyed rotary controls and leather detailing. The dark tones and light leather flourishes beautifully accent the Veil Gallery upon the Phantom’s fascia. The flawless Black Pack elements on the exterior include an alluring black trim on the windows, the grille and the exhausts.

The very attitude and nature of The Gallery has been extended to the other Bespoke details on both the exterior and interior of the Phantom it resides within. With a highly contemporaneous edge, the limousine exemplifies the spectrum of Bespoke potential, with the Phantom itself as a canvas quite like no other.

Piston.my

Latest News

Porsche begins vehicle assembly in Malaysia, the first time outside Germany

Naza Italia introduces Ferrari 296 GTB PHEV, priced from RM1,228,000

F1/Round 2: Highlights and Provisional Results of 2022 Saudi Arabian Grand Prix

Sono Motors to start selling Sion solar energy vehicle from 2023, priced from 28,500 euros (about RM132,000)

F1/Round 2: Preview and Starting Grid for 2022 Saudi Arabian Grand Prix

Rolls-Royce Motor Cars Dubai commissions the Carbon Veil for The Gallery in the Phantom

Chery Malaysia Honours Olympic Bronze Medallists with Tiggo 7 Pro SUVs

Proton Expands Reach into the Caribbean with ANSA Motors Partnership

Toyota Gazoo Racing Unveils the New GR Supra GT4 EVO2, Set for 2025 Debut

MG Unveils Surprise Electric Roadster: The MG Cyberster

SAIC Motor Malaysia Unveils the All-New MG5 Sedan and MG HS SUV

Honda Malaysia Celebrates Merdeka with Special Rebates Up to RM8,000 Across All 2024 Models

Dongfeng Unveils Compact BOX Electric Vehicle Set for Q4 2024 Malaysian Launch

End of an Era: Petrol-Powered Abarth 500 Bids Farewell After 16 Years

Audi RS3 Revamped and Ready for Action: New Design, Same Power

Ford’s Vision for the Future: Expanding Mustang and EV Offerings

Archive

Proton Expands Global Presence with New CKD Plant in Egypt

Proton Champions Sedan Sales In Malaysia

Electronics Company Sharp Enters the EV Game with First Concept Car: The LDK+

2025 Porsche 911 GT3 Retains the 4.0-Litre Flat-Six Engine and Has a Shorter Final Drive Gear Ratio

Nissan Sells A Significant Portion Of Its Shares To Mitsubishi

Follow us on Facebook

Follow us on YouTube

The Piston Show