Piston.my

Latest News

Last year saw the return of the Dutch Grand Prix after a 36-year gap – the longest in the Formula 1 championship. The reason it had dropped off the F1 calendar was due to financial difficulties that prevented the Zandvoort circuit from being modernized and upgraded as the sport evolved. It was only in 1995 that proper investment was made with a new owner and the circuit, which had its first race in 1948, was redesigned and redeveloped.

The last F1 race in 1985 was won by Niki Lauda when he was with McLaren, which also won the championship that year. Besides Lauda, the drivers of that era were men like Jim Clark, Jackie Stewart and Rene Arnoux, all retired (or passed away).

Formel 1 – Mercedes-AMG Petronas Motorsport, Großer Preis der Niederlande 2022. Lewis Hamilton Formula One – Mercedes-AMG Petronas Motorsport, 2022 Dutch GP. Lewis Hamilton

While the 4.3-km layout of today’s circuit for Round 15 of the 2022 championship differs greatly from the one that existed in the first 50 years, some of the drivers who raced in last year’s championship round were familiar with it from their Formula 3 years.

Race starts at 3 pm in Holland/9 pm in Malaysia

Zandvoort is a challenging track with 14 corners, many of them fast and sweeping with the ‘Tarzan Corner’ hairpin at the end of the start/finish straight. Undulating, rising and falling between the sand dunes, with a rollercoaster-like vibe similar to Portimao, it has an old-school feel, which many of the drivers like. “It’s definitely a unique challenge for the drivers and puts many aspects of an F1 car to the test,” said Mercedes-AMG’s Toto Wolff.

The elevation change is almost 8 metres and being located across the road from the North Sea, strong wind can be expected, sometimes blowing sand onto the track and affecting grip (an issue normally associated with places like Bahrain).

Zandvoort doesn’t feature many long straights and a lot of the lap is spent cornering. Due to this, it’s a track with low power sensitivity and engine duty, so the Power Unit has an easier time than at other tracks, where it is worked harder.

Because of the many high-speed changes of direction, where the mass of the car can work against you, Zandvoort has the highest mass sensitivity of the year – which means, carrying more fuel will be more penalising. But it’s below average for tyre duty and wear, because most of the corner speeds and loads sit in the middle of the. Many sequences are also very flowing rather than stop/start, which puts traction demand into the tyre.

“The most challenging parts for the tyres are the banked Turns 3 and 14, which are taken at high speed and place sustained combined forces on the car: downforce as well as lateral demands. Along with the other overall demands of the circuit layout, this is why we have nominated the hardest three compounds in the range for only the fourth time in 2022, after Bahrain, Spain and Great Britain,” said Mario Isola, Pirelli’s Motorsport Director.

Overtaking is challenging at Zandvoort due to the almost constant sequence of cornering, apart from the main straight (which leads into not a particularly big braking zone) and the back straight (which isn’t very long). This means qualifying performance and pace is vital and makes it one of the most important F1 qualifying sessions of the year.

“The new F1 car-tyre package this season should make overtaking easier on a track where it was hard to pass last year. The majority of drivers stopped just once to maintain track position but this time, there could be more of a focus on the softer compounds – which might lead to more two-stoppers and drivers pushing even harder,” predicts Isola.

There are two very different tarmacs at Zandvoort, which means the tyres behave quite differently on one relative to the other. There’s some new, smoother tarmac laid in 2020, and the rest of the track features an older, more aggressive surface. This makes it tricky to rebalance the car for all corners, because the surfaces can be different from one corner to the next.

Cornering speeds and gears used by Mercedes-AMG drivers.

Drivers experience 5.2g through the long, sweeping Turn 7 at Zandvoort, one of the highest lateral g-forces of the entire season. Of the 10 braking sections, two are classified as highly demanding on the Brembo brakes, six are of medium difficulty and the remaining two are light.

The most difficult one for the braking system is on the first turn because the cars come off a 1.1-km straight with no braking on the last turn. The single-seater F1 cars hit the brakes at 317 km/h and drop to 133 km/h in just 111 metres. To achieve this, the drivers brake for 1.99 seconds and sustain 4.8g of deceleration.

Because of the very long gap from the 1985 Dutch F1 GP, the most successful driver remains one from that era and it is Jim Clark who won 4 times in the 1960s. Max Verstappen won last year at his home race, and if he repeats his winning form for the next few years, he could replace Clark.

Scuderia Ferrari has been the most successful team in the Dutch F1 GP with 10 victories between 1952 and 1983. During that period, the team had drivers like Alberto Ascari. Juan Manuel Fangio, Mike Hawthorn, Phil Hill, John Surtees, Niki Lauda and Jody Scheckter.

A second collaboration between Lamborghini and Ducati was unveiled to the public at the San Marino Grand Prix at the Misano World Circuit Marco Simoncelli – the new Ducati Streetfighter V4 Lamborghini. An exclusive limited edition model, only 630 units will be built with each one priced at £55,995 (around RM288,350).

The Streetfighter V4 Lamborghini follows the Ducati Diavel 1260 Lamborghini which was presented two years ago in the first collaboration between the two companies, ambassadors of the ‘Made in Italy’ brand. While the first superbike was inspired by the Sian hybrid supercar, this latest one has been inspired by the Huracan STO.

BHPetrol

The new superbike adopts the well-known ‘Fight Formula’ to the technical base of the Panigale V4 S 2023, while integrating elements and stylistic features that are unmistakably Lamborghini. Integrating technical and stylistic elements typical of Lamborghini DNA – and the Huracan STO, in particular – the superbike has exclusive livery in green and orange.

Huracan design elements
The Ducati Style Centre, in collaboration with Lamborghini’s Centro Stile, redesigned the superstructures of this special bike, drawing inspiration from the Huracan STO. It features specially-made forged wheels enhanced by the titanium clamping nut on the rear, with the front fender design is inspired by the air ducts integrated in the supercar’s ‘cofango’. The toe cap, radiator cover, wings, tank cover and tail are all made of carbonfibre, the same lightweight material used for all Lamborghinis.

The livery features the STO logo and the number ’63’, which refers to the year in which Lamborghini was founded. Multiply that number by 10 and you get 630 – the number of units of the superbike that will be available.

The colours used are exactly the same as those used for the Huracan STO, with a base in Verde Citrea (green) and contrasting parts in Arancio Dac (orange). The model name and the unique number of each unit are shown on a metal plate inserted in the central tank cover and an aluminium insert on the ignition key. Each owner will get a number Certificate of Authenticity for the superbike.

The superbike’s seat is also inspired by the Huracan STO’s seat finish with accents matching the superstructure. At the heart of the Streetfighter V4 Lamborghini is the 1103 cc Desmosedici Stradale engine with power of 208 ps with a dry clutch, as on the Ducati MotoGP and Superbike models.

Even more exclusivity
In addition to the 630 units, Ducati will offer an even more exclusive series dedicated to 63 Lamborghini customers. Thanks to the Ducati’s Style Centre and Speciale Clienti program, they will be able to create unique versions by customizing their Streetfighter V4 Lamborghini with livery and rims in the same colour as their car. It will then be possible to choose the brake caliper colours and seat details from those included in the Huracan STO palettes, in addition to the standard colour scheme.

August was a good month for the carmakers in Malaysia as improved production output enabled them to deliver more vehicles. Like Proton, market leader Perodua also reported significantly higher numbers for its August deliveries with 26,039 units registered nationwide or 42% more than in July.

“We are currently trying to build on this production improvement to ensure speedier delivery to our customers,” Perodua President & CEO, Dato’ Sri Zainal Abidin Ahmad.

Bezza output highest
Of the 28,036 units produced in August, the Bezza accounted for the most number (24.2%), closely followed by the Myvi which accounted for 22.2%. The Axia output was the third highest with 4,857 units (17.3%) leaving the factory in Sg. Choh, Selangor.

BHPetrol

“For the newly launched Alza, we have received bookings of 51,000 units so far,” said Dato’ Sri Zainal, adding that 7,682 units registered in July and August. An average of over 1,000 orders were received daily in the first 27 days after bookings opened, swelling the order bank to over 30,000 orders by launch day.

10 months to get Alza?
With production of the new Alza having started in June and a targeted volume of 3,000 units a month, the already large number of orders means that the waiting period could stretch to 10 months.

The cumulative volume of deliveries achieved for the first 8 months of this year shows an increase of 63.7% to 171,728. In the same period in 2021, 104,933 units were registered nationwide.

Dato’ Sri Zainal points out, however, that this comparison must also be seen in the light of the country having a lockdown situation between June 1 to August 15 last year. During that time, all non-essential operations were stopped, including vehicle production and sales activities.

The ‘King’ is still bestseller
“The Myvi remains our bestseller this year with 48,658 units delivered, followed by the Bezza with 39,642 units, and the Axia 37,013 units,” he said.

Supply better but costs rising
Dato’ Sri Zainal said the improvement in production and sales came about as some key issues have been resolved at the moment. These issues relate to the global semiconductor chip supply shortage and insufficient labour at some suppliers’ operations which lead to disrupted supply of some components.

“We are also closely monitoring the increase in prices of raw materials at the moment and are working with the ecosystem on how best to mitigate this impact to our production operations,” he added.

To know more about Perodua’s products and services, visit www.perodua.com.my.

Although it had a slow start to 2022, Proton’s production has now risen substantially and in August, deliveries totalled 15,880 units (including export sales). It was the best sales month for the Malaysian carmaker since July 2013, 109 months ago.

Cumulatively, for the first 8 months of the year, sales of Proton vehicles reached 87,481 units, a 39.7% over the 62,637 achieved between January and August 2021. By Proton’s estimate (based on the expected Total Industry Volume of 66,900 units), that would give it a market share of 19.5%, with the August numbers alone taking the share to an estimated 23.7%.

The company remains focused on ending 2022 with a fourth consecutive year of volume growth.

Sales leadership
Despite the recent launch of new direct rivals from other brands, Proton has maintained its position at the top of the SUV segment. The X50 reached a third consecutive month where deliveries crossed the 4,000-unit level with 4,329 units delivered in August. It’s the first time an SUV has achieved such a feat in Malaysia and comes on the back of its industry record with 4,763 units in July.

Click here to find out how you could win a new X50 by just spending RM30.

The larger X70 contributed 1,555 units in August, bringing Proton’s total SUV sales for the month to 5,884 units. The cumulative volume for 8 months is now at 37,489 units.

On the passenger car side, the Saga also benefited from improved component supply as 6,156 units were delivered last month. Demand for the latest Saga remains high and total deliveries have exceeded 14,000 units since its launch in May this year.

The biggest beneficiaries of the increase in production volume were the Persona and Iriz. 2,612 units of the Persona were delivered nationwide, the highest number since February 2020. For the Iriz, the 962 units delivered were at a sales level not since April 2021.

BHPetrol

Stabilised production
“With four months to go in 2022, Proton’s production operations have stabilised. Critically, our component supply is now more consistent and better managed to ensure we can produce as many cars as possible. With that in mind, we have undertaken an initiative to increase the number of delivery trucks by over 100% by the end of the year. This makes it easier to ensure our dealers receive their stock as quickly as possible and, in turn, this benefits our customers who have been patiently waiting for their vehicles,” said Roslan Abdullah, Deputy CEO of Proton.

To Ford, the lives of the occupants of a pick-up truck like the Ranger are no less valuable than those in a passenger car, and require the maximum level of protection that can be provided. For this reason, the next-gen Ford Ranger pick-up truck comes with some of the latest in crash protection features and driver assistance technologies.

Passive Safety systems and features include the tough vehicle structure, SRS airbags, and 3-point seatbelts while Active Safety systems include driver assistance technologies (XLT Plus and Wildtrak) to alert the driver and help him avoid accidents.

During the development phase, numerous computer-aided engineering (CAE) models were built to test various accident scenarios. These included full-frontal, frontal offset, pole test, rear offset crash tests, pedestrian impacts, roof crush tests, and more. Additionally, the team conducted hundreds of physical tests to ensure vehicle safety performance was met and to validate the CAE modelling.

As safety technology keeps advancing all the time, this new generation of the Ranger gets some of the latest systems that make motoring even safer. Here are some of the new safety technologies:

Post-Collision Braking
[Available on Ranger WildTrak/XLT Plus]

In the immediate moments following a collision, the vehicle may be headed in an unpredictable direction. It could hit another object – a lamp post or another vehicle. To reduce this risk, the next-gen Ranger has Ford’s post-collision braking system which automatically applies the brakes after a collision. The system automatically engages with moderate brake pressure when an initial collision has occurred, so the vehicle will come to a standstill and avoid a secondary collision.

Pre-Collision Assist
[Available on Ranger WildTrak/XLT Plus]

Pre-collision Assist uses both the new, wide-view windscreen-mounted camera and radar located near the front bumper to scan the road ahead to detect a potential collision with another vehicle, pedestrian, or cyclist directly in front of the vehicle. If an imminent collision is detected, the system emits an audible and visual warning. If the driver’s response is not sufficient, the Automatic Emergency Braking (AEB) system will activate automatically.

The AEB system has been enhanced with cyclist and pedestrian detection capability as well as the ability to provide AEB support at an intersection in some instances, thanks to the addition of the new, wider camera coverage. Whenever a possible collision is detected and the fails to take corrective action, the vehicle will apply the brakes automatically.

Before the AEB activates, the driver will get a Forward Collision Warning, an audible tone which will be very evident because the audio system (if on) will be muted. If the driver does not respond correctly, ie slow down or brake, then AEB will activate.

Evasive Steer Assist
[Available on Ranger WildTrak]

A segment-first feature in the next-gen Ranger is Evasive Steer Assist which also helps prevent potential collisions. In the event a vehicle in front is too slow or has stopped, the Ranger driver can get additional assistance in the steering to steer around the hazard. This will be valuable when braking alone cannot fully avoid the collision. The advanced system is designed to operate at both urban and highway speeds and employs the same camera and radar used with the Pre-collision Assist feature.

Reverse Brake Assist
[Standard on Ranger WildTrak]

Reverse Brake Assist helps the driver to avoid or mitigate potential collisions while reversing. The system may detect moving vehicles or stationary pedestrians and objects behind the Ranger. While some other systems may only alert the driver, the system in the next-gen Ranger will automatically apply the brakes to briefly stop the vehicle, should the driver not react in time.

Cross Traffic Alert
[Available on Ranger WildTrak]

Tricky reversing situations are a little less stressful with the next-gen Ford Ranger’s Cross Traffic Alert system. When the driver shifts into Reverse, the system is active, and will alert the driver of a vehicle approaching from the sides, when reversing out of a driveway onto a street, or even from a busy supermarket parking spot.

Adaptive Cruise Control with Stop-and-Go
[Available on Ranger WildTrak]

Adaptive cruise control with stop-and-go is more advanced than just cruise control. It is an intelligent feature that maintains a safe gap with a vehicle ahead whatever the cruising speed is set at. This is done by scanning the road ahead with the camera and radar and if there is a vehicle, the speed will be adjusted.

The system in the next-gen Ranger is even more advanced that many Adaptive Cruise Control systems as it operates down to standstill. With other systems, the cruise control will deactivate below a certain speed. The Ford system can slow the vehicle right down to standstill when necessary, and then resume forward movement when the vehicle ahead moves on.

BLIS
Available in many passenger cars today, this system is like having another ‘set of eyes’ when performing a lane change or joining a highway. If a faster-moving vehicle enters the Ranger’s blind spot zone, BLIS will alert the driver via a small light on the side mirror (left or right), so they know not to change lanes.

Next-Gen Ranger In East Malaysia
After journeying around Peninsular Malaysia on a series of previews before it has its official showroom launch, the next-gen Ranger will cross the South China Sea to East Malaysia.

Sime Darby Auto ConneXion (SDAC) will hold previews at Vivacity Megamall in Kuching, on September 7 – 11, and at Suria Sabah Shopping Centre in Kota Kinabalu on October 5 – 9, 2022.

If you would like to attend either of these two events, sign up here for an exclusive invitation. Alternatively, you can visit www.sdacford.com.my for more information about the next-gen Ranger, or follow the Ford Malaysia Facebook, Instagram, Twitter and YouTube channels.

Like any progressive manufacturer, Continental constantly improves its products. Not only is the upgrading only for current requirements and conditions but also with foreseeable changes in the market in future.

Following the success of its Generation 6 products, the tyremaker has now moved to Generation 7, with the first of this new generation in Malaysia being the UltraContact UC7. An all-round tyre, it prioritizes safety, with an emphasis on exceptional noise comfort and long drive life.

“The specific needs and driving habits of consumers are constantly evolving, and Continental Tyres is committed to bringing continuous innovations that meet those changing needs. We invest heavily in the development of every single product we bring to market, and the resulting UltraContact UC7 truly represents a next-generation upgrade,” said Dalibor Kalina, Head of BA Replacement Tires Asia Pacific.

Significant improvements
In comparison to the UltraContact UC6, the UltraContact UC7 has significant improvements in braking and control on wet ground, important with Malaysia’s tropical climate. Other performance aspects such as fuel efficiency, dry braking, and handling are also enhanced.

To offer the best driving experience to consumers, Continental has developed flagship technologies focusing on the unique consumer requirements for each segment. Specially tailored for the all-round segment, Confidence+ Technology combines the best of the brand’s compound technology and construction design features to create the ultimate tyre that does not compromise on any aspect of safety, comfort, handling, or mileage.

Extensive testing before launch
With on-road safety as the greatest priority, before every new tyre product goes into the market, it is subjected to test after test to ensure that its performance across all aspects meets Continental’s highest requirements.

“We take pride in our safety technologies that have been highly recognised for generations. With ‘Vision Zero’ as our top priority, we strive to achieve zero accidents, zero injuries, and zero fatalities on the road,” said Andrea Somorova, Managing Director of Continental Tyre Malaysia.

The development of the UltraContact UC7 was carried out by a worldwide team of around 25 engineers and material experts. They spent more than 9,500 hours designing, simulating, building, and testing all the prototypes with the target consumer always in mind.

During the development phase alone, Continental engineers conducted more than 850 tests under various conditions, with a combined distance that could circle the earth 12 times. As Bob Liu, Director of Continental R&D Asia Pacific, explained, “We put this tyre through rigorous rounds of testing to ensure we meet our own exacting standards and can deliver cutting-edge tyre technology to consumers. We will continue to do so as we further expand the portfolio to establish powerful, competitive offerings for the market.”

What makes it better?
Featuring the Continental ‘Diamond DNA’ – Diamond Compound, Noise Breaker 3.0 and Aqua Channel Advanced –  the new UltraContact UC7’s superior wet performance is proven by a shorter braking distance and strong grip on wet slippery roads. This is due to the Aqua Channel Advanced surface sipes on the centre part of the pattern which efficiently evacuate water to reduce the risk of hydroplaning.

Simultaneously, the innovative Noise Breaker 3.0 design with Flow X-celerator leverages the Venturi Effect principle to accelerate water flow through the groove, improving surface contact between rubber and road.

BHPetrol

Thirdly, the Diamond Compound formulation enhances the transformation of kinetic energy into heat at optimum levels, resulting in shorter braking distances – even on wet roads.

The second advantage of the UltraContact UC7 is a quieter and more harmonic drive as a result of reduced noise levels and smooth vibrational frequency. As sound waves travel through the grooves, the Noise Breaker 3.0 interrupts the waves by disrupting the homogeneity of the grooves.

The sound waves are broken up and dissipated into smaller waves, preventing noise from building up and traveling into the cabin of the car. The Diamond Compound with whisper touch also contributes to reduced noise generation by absorbing impact from the road.

The third advantage is long drive life, allow the motorist a better return on his expenditure. The Diamond Compound’s optimised polymer network provides wear resistance for long-lasting tread life.

The UltraContact UC7 is available, in sizes from 15 inches to 18 inches. It is suitable for fitment on compact and mid-size cars, MPVs, and luxury sedans. Although launched, Continental Tyres has not released the prices for the new tyres.

Archive

Follow us on Facebook

Follow us on YouTube