Piston.my

English

When ‘Volvo’ is mentioned, many models come to mind and it depends on which generation is responding. Older people will think of the 122 Amazon and 244 while a generation later would remember the 850R. But everyone is likely to remember the P1800, perhaps Volvo’s most internationally renowned model ever and the one that arouses most emotions.

Planned in Sweden, designed in Italy, unveiled at a car show in Brussels, built in Britain and a huge success in the USA, production of the P1800 took place between 1961 and 1972. It had reached showrooms after 4 years of careful planning and development and while sales numbers were not spectacular, the image viewpoint it played was far bigger role than any previous Volvo model.

A ‘halo model’
The Volvo P1800 was born for that very reason – to attract the attention of passers-by to Volvo’s showrooms and to increase what today is known as ‘floor traffic’. Once ‘captured’, it was up to the sales advisors to do whatever they could so that people who entered the showroom left it after placing an order for a new Volvo.

The P1800 wasn’t Volvo’s first go at making a sportscar. Back in the early 1950s, it had produced the open 2-seater plastic-bodied Volvo Sport between 1955 and 1957. Only 67 cars were ever made and the production ended rather abruptly because the company’s President then, Gunnar Engellau, was disappointed with the quality. “Not a bad car… but a bad Volvo” was the way he put it when he gave the order to stop production.

1956 Volvo P1900 Sport
Volvo’s first attempt at a sportscar was in 1956 with the P1900 Sport, but poor quality doomed it to a short production life.

However, he recognised the importance of having a prestigious and exciting model to boost overall sales, and Volvo dealers were desperate for just such a car. This led to another go at making a sportscar and design proposals were ordered from Italy. Volvo consultant Helmer Petterson – who was deeply involved in the planning of the new car – had got his son, Pelle, a job at Pietro Frua, thanks to Pelle’s fresh degree in industrial design from the Pratt Institute in New York.

Designed in Italy… by a Swede
When the time came to unveil the 4 proposals to Volvo’s board members in 1957, Helmer sneaked in his son’s design as a fifth possibility – and that was the one that everyone picked! Engellau, in particular, liked it since he had very definite views about wanting an Italian-designed car. That of course is precisely what he did get – except that it was actually the work of a 25-year old native of Goteborg, Volvo’s home city!

Eventually, however, the truth behind the winning design proposal emerged. Engellau was furious as he felt he had been tricked and promised that Pelle would never be acknowledged as the car’s designer. And indeed, many years went by before the truth was made known and Pelle Petterson received the credit he was due for designing one of the world’s most attractive sports coupes.

The new sportscar had a fixed roof, steel body, with a lot of the mechanical components taken straight from the 122 Amazon. It was powered by the newly developed B18 engine in its 100 bhp sports version when it eventually arrived in the showrooms.

Initially made overseas
At this time, Volvo found itself in a hugely expansive phase and the company realized from the outset that it did not have sufficient in-house capacity to manufacture the new model – not for pressing of body panels, nor for painting or assembly, not even on a small scale. The hunt for a suitable partner got under way and after much deliberation, a decision was taken to use two British companies to build the car: Pressed Steel would build the bodies and Jensen Motors would paint and assemble the cars.

Production started but this was a far from friction-free method. Constant problems with personnel, working methods, quality, suppliers and logistics along with an unwillingness to deal with these issues meant that as soon as it was possible, Volvo transferred production home to Sweden.

By early 1963 – after Jensen had completed 6,000 cars – production of the 1800 started up in Volvo’s Lundby factory. But it was not until 1969 that body pressings were transferred from Pressed Steel in Scotland to Volvo’s own press shop in Olofstrom. The move home also coincided with a change of name for the P1800. At first, it was badged the ‘P1800 S’; later in 1963, it was known simply as the ‘1800 S’, the alphabet standing for Sweden.

During the car’s long life, no radical changes were made to the successful exterior lines. Only details such as the grille, trim mouldings, wheels and colours differentiate the various model years. From the technical viewpoint, the 1800 shadowed the development of Volvo’s other models and was continuously upgraded. Disc brakes all round, more powerful engines and electronic fuel injection were the most noticeable changes.

The P1800 ES (left) and the Convertible (right).

During its production life, two other body variants were also available. One was a convertible (only 30 units) and the other was the 1800 ES, with an extended roofline and an estate car rear featuring a large glass tailgate. The variants were designed in in-house this time and attracted considerable attention too.

Becoming The Saint’s car
Roger Moore was fortunate enough to drive a P1800 in his role as crime-fighter Simon Templar in the British TV series, ‘The Saint’. The TV production company had been looking for an attractive sportscar that would suit a gentleman of independent means and, after being turned down by Jaguar, approached Volvo to ask for the P1800. Volvo was, of course, quick to oblige as it would be a brilliant PR move for the new model. Every week, it appeared in the living rooms of TV viewers,  becoming so firmly etched in minds that it came to be referred to as ‘The Saint’s car’.

The P1800 gained worldwide publicity every week on TV as ‘The Saint’s Car’, driven by Roger Moore who played the part of Simon Templar.

The P1800 was never intended to be a mass-produced car. As mentioned earlier, it was planned as a niche product or what is today referred to as a ‘halo model’. Yet it was viable enough to be within the reach of most people who wanted a car that looked like a Ferrari but cost and functioned like a Volvo – pleasant, reliable and economical.

In 1997, Volvo produced a coupe designated the C70 (left) and it was also used in a remake of ‘The Saint’. Its designers have been looking at a coupe for the 21st century as well, and their ideas were shown in the Concept Coupe in 2013 (right).

LOOKING BACK: The forgotten Volvo P1900 sportscar with a fibreglass body

COVID-19

Social distance

PISTON.MY

BRABUS declares itself to be the world’s largest independent automotive tuner for more than 4 decades and during that time, it has established a reputation for raising the performance levels of Mercedes-Benz models. Its expertise in petrol and diesel internal combustion engines (ICE) is considerable but with the industry moving towards electrification, will the company be able to continue its business of providing performance upgrades?

BRABUS Electric concept

The answer would be yes and BRABUS is already showing that it can do for electrically-powered cars what it has done for ICE cars. In fact, it already has a Zero Emission Division for some time now and this division began looking at the EQC 400 4MATIC by Mercedes-Benz when it arrived on the market.

It has developed a performance upgrade for the EQC’s electric powertrain and delivers even more agile driving dynamics. Known as the E-PowerXtra performance upgrade, output goes up by another 10 kW to 310 KW (416 bhp) and peak torque is raised to 830 Nm from 760 Nm. As a result, the 5-door SUV can zip from standstill to 100 km/h within a claimed 4.9 seconds. The top speed remains limited to 180 km/h.

BRABUS Electric concept

The upgrade is designed to become active when the driver selects drive mode ‘S’ with the standard DYNAMIC SELECT switch. When drive mode ‘E’ is active, , the PowerXtra ELECTRIC upgrade offers ‘one pedal driving’, a feature often requested by drivers of electric vehicles. The SUV decelerates sharply when the driver just lifts off the accelerator pedal. This requires far less frequent use of the brakes in normal traffic and further increases the energy recovery rate.

BRABUS Electric concept

While the aerodynamic-enhancement kit with the exception of the already available rear spoiler is still under development, the appearance can already be upgraded with tailor-made BRABUS Monoblock Z alloy wheels with diameters of 20 or 21 inches. The eCrossover can be refined with two variants of the sporty and elegant 10-spoke design available for this model.

The BRABUS Monoblock Z PLATINUM EDITION wheels with 21-inch diameter are even more exclusive. The product of a high-tech forging process, these rims offer a combination of lightweight construction and maximum strength. The front axle runs on size 9Jx21 wheels with 255/40R21 ContiSportContact tyres of size. The rear fender wells accommodate forged 10.5Jx21 rims with tyres sized at 285/35R21.

BRABUS Electric concept

BRABUS Electric concept

As for all Mercedes-Benz models, BRABUS offers a host of custom refinement options for the interior of the EQC 400 4MATIC that include an exclusive fine leather interior crafted by the company’s own upholstery shop.

BRABUS offers exclusive options for the interior that create numerous possibilities for the customer. The line-up ranges from aluminium pedals and door-lock pins to scuff plates with backlit BRABUS logo in changing colours and a complete redesign of the cockpit.

2018 Mercedes-Benz EQC 400 4MATIC
The Mercedes-Benz EQC 400 4MATIC made its global debut 2 years ago.

The other side of the BRABUS business – armoured SUVs

PISTON.MY

x

OBITUARY

We are very sad to learn that Osamu Masuko, special adviser and former Chairman of the Board of Mitsubishi Motors Corporation (MMC), passed away on August 27 at the age of 71 due to heart failure. The news was only issued in an official statement by the company today, although Mr. Masuko’s funeral took place earlier.

Originally from Mitsubishi Corporation, the trading company, Mr. Masuko was appointed as the President of MMC in January 2005. He developed and implemented the Mitsubishi Motors Revitalization Plan and was largely credited with revitalizing the company when its image was seriously damaged due to what was regarded as a cover-up of defects for a long period.

He led the development of advanced environment-friendly vehicles including the world’s first mass-produced electric vehicle, the i-MiEV, as well as the world’s first 4WD SUV plug-in hybrid EV, the Outlander PHEV.

In the ASEAN region, he promoted in local production and expanded sales, particularly in Thailand which is the production hub for the Triton. In addition, in 2016, he built solid relationships with the Alliance companies (Renault and Nissan) and the Mitsubishi Group, establishing close cooperation and sharing resources.

Our condolences to his family and may he rest in peace.

BHPetrol Euro5 Diesel

BHPetrol RON95 Euro4M

The Pikes Peak International Hillclimb was held over the weekend and this year didn’t see any automakers participating. It’s a tough year for the auto industry and budgets are obviously reduced, and with the COVID-19 restrictions, entry for travellers from Europe is also not allowed. So the event has been largely a ‘domestic’ one like what it was for many decades before Audi and Peugeot stormed the peak in the 1980s. This year, there is also no motorcycle category as it has been deemed too dangerous for two-wheelers.

Coincidentally, over in England, the first of a limited run of 15 units of the Pikes Peak Continental GT by Mulliner has just been completed. Announced last year, the  limited edition of the Continental GT was to celebrate the record-breaking run of a standard Continental GT at Pikes Peak in 2019. A base-spec Continental GT starts at £159,100 (about RM883,000) in the UK and these cars would cost considerably more.

2020 Bentley Continental GT Pikes Peak

Fastest production car up Pikes Peak
The Grand Tourer shaved 8.4 seconds off the previous record along the 19.98-km course, making it the fastest production car ever to compete in the Pikes Peak International Hillclimb event. Driven by 3-time champion, former ‘King of the Mountain’ Rhys Millen, the W12-powered Continental GT climbed almost 5,000 ft through 156 bends in just 10 minutes, 18.4 seconds.

The limited edition features exclusive Radium by Mulliner paintwork, carbonfibre body kit, Acid Green brake disc callipers, and Pirelli P Zero Colour Edition Tyres. Gloss black detailing has also been added to the front lower bumper inserts, roof panel, wing mirrors and rear surfaces. 35% of the buyers (who are situated around the world) also specified the optional mountain decal, the same as the record-holding car.

2020 Bentley Continental GT Pikes Peak

While 22-inch Mulliner Driving Specification wheels in Gloss Black are standard, there’s an optional ‘100’ grille as a reminder that the Continental GT’s impressive hillclimb achievement took place in Bentley’s centenary year.

Sporting theme from competition car
Inside the cabin, Alcantara with contrasting Radium thread stitching adorns much of the soft trim areas, matched with Beluga hide. The steering wheel features a honeycomb stitching design and a centre stripe both in Radium, as per the Pikes Peak GT race car. Carbonfibre fascias and waistrails are complemented by a Piano Black centre console, all adding to the sporting theme.

2020 Bentley Continental GT Pikes Peak

The passenger-side fascia features a graphic showing a section of the Pikes Peak track, with 5 different graphics being used across the 15 cars being made, along with the record-setting time.

2020 Bentley Continental GT Pikes Peak

2020 Bentley Continental GT Pikes Peak

Pikes Peak embroidery to the seat headrests in Radium stitching, Radium contrast binding on the overmats, Pikes Peak treadplates and exclusive B&O speaker covers in Black Anodised and Radium finish further enhance the interior appeal. The Continental GT’s luxurious cabin includes the Bentley Rotating Display, deep pile overmats and Front Seat Comfort Specification.

Same W12 engine
Under the bonnet is essentially the same engine as the car that Millen drove. The mighty 12-cylinder petrol engine develops 626 bhp/900 Nm which can take the Continental GT from 0-100 km/h in a claimed 3.7 seconds and on to a top speed of 333 km/h.

At the 2018 Pikes Peak Hillclimb, Millen claimed the outright record for a production SUV with a Bentayga when he did the run in 10:49.9.

Bentley Continental GT breaks record at Pikes Peak

PISTON.MY

♦ McLaren’s Carlos Sainz Jr. didn’t get to race as exhaust failure while driving for the grid line-up forced him to instead return to the pits just before the start.

♦ Rain was headed towards the circuit but the start of the race was in dry conditions.

♦ The first crash took place during lap 11, bringing out the Safety Car. Giovinazzi’s Alfa Romeo was starting to spin and Russell (Williams) tried to avoid him but could not and crashed into the wall, with Giovanazzi doing the same a second later.

♦ Pierre Gasly and Sergio Perez chose not to head for the pits to get fresh tyres while the rest of the cars came in while the Mercedes-AMG Safety Car was out for about 3 laps. Gasly would only bring his Scuderia Alphatauri Honda in on the 27th lap, the last driver to do so.

♦ Charles Leclerc was required to meet the Stewards after the race as he was seen to be ‘driving unnecessarily slowly’ during the reconnaissance lap.

♦ At the halfway mark, Lewis Hamilton had a 3-second lead over team mater Valtteri Bottas, and was about 7.5 seconds ahead of Max Verstappen. The top three were essentially on their own as the gap after the Dutch Red Bull driver was about 16 seconds to Daniel Ricciardo.

♦ On lap 28, Hamilton’s car was spotted having a damaged wing and at the same time, the team sent a message to Bottas which suggested he was to push as hard as he could.At that point, Hamilton was still 3.7 seconds ahead.

♦ In the last few laps of the race, Hamilton expressed concerns about the front tyres, fearing a repeat of Silverstone – which wasn’t good at a track with such a long lap. But he managed the tyres as best as he could and crossed the finish line for his fourth win at Spa.

PISTON.MY

l

 

Aston Martin’s DB5 is well known as the ‘James Bond car’, having appeared as a gadget-packed sportscar in the movie ‘Goldfinger’ (as well as ‘Skyfall’). Only 1,059 units were produced and sold between 1963 and 1965, so it is a rare model. As part of its Continuation program, the company is currently making 25 units of the ‘Goldfinger’ car, complete with the array of gadgets, priced at the equivalent of RM17.7 million.

While the original DB5 is not readily available and only 25 people will get to own the Goldfinger cars, there is now the DB5 Junior, a two-thirds scale replica that runs on electric power. It is the result of a collaboration between Aston Martin and The Little Car Company and based on Aston Martin’s reference 3D scan of an original DB5 to ensure complete accuracy and authenticity.

2020 Aston Martin DB5 Junior

Developed over the last 15 months as a collaboration between the two companies, the junior car is priced at £35,000 (about RM195,000). Like all Aston Martin models, customisation of the DB5 Junior is possible in almost the same manner. Only 1,059 units will be available  – the same production volume as the original DB5 – on a first-come, first served basis with a refundable deposit required.

2020 Aston Martin DB5 Junior

The DB5 Junior is around 3 metres long, and 1.1 metres wide. It is designed to easily accommodate an adult and a child side by side. The aluminium honeycomb chassis and composite body provide a very rigid platform whilst keeping the total weight down to around 270 kgs.

Absolute authenticity was key throughout the development of the car. For example, the DB5 Junior sports the same iconic Aston Martin ‘wings’, ‘shield’ and DB5 badges as the original 1963 model. Like its big brother, the dashboard is filled with functional Smiths instruments, which have been cleverly updated for the modern era.

2020 Aston Martin DB5 Junior

The fuel gauge has been converted into a battery meter, while the oil temperature now monitors the temperature of the electric motor. Finally, the same Smiths clock as seen in the original 1960s car sits proudly in front of the passenger seat.

The perfect two-thirds scale steering wheel has a racing-style quick release to make entry and exit easier for the driver. Power is regulated by billet aluminium accelerator and brake pedals and, as would be expected, there are working headlights, brake lights, indicators and a horn. However, there are no 007 gadgets which is a pity.

In true DB5 style, the car comes in the famous Silver Birch colour as standard, with a full black leather interior and carpet set. There is even a boot at the rear for storage.

Like the real car, the DB5 Junior sits on double wishbone suspension at the front  and even the roll centre and camber gain match the original geometry. At the rear, there is a live axle that is of the 1960s period, with authentic upper and lower trailing arm suspension and Panhard rod.

2020 Aston Martin DB5 Junior

Behind each of the 10-inch wire wheels are ventilated disc brakes. Like modern hybrid and all-electric cars, there is regenerative braking which contributes to recharging of the battery pack.

Powered by a torquey electric powertrain delivering 5 kW (6.7 bhp) to the rear wheels, the DB5 Junior can zip to a maximum speed of almost 50 km/h. The removable battery pack under the bonnet is said to provide 16 to 32 kms driving range, depending on how the car is driven. A second battery can be added for extra range and replacement of each pack is easily done in seconds.

For safety, there are three modes to suit the skill of the driver, with the power output reduced to 1 kW (1.3 bhp) for less experienced drivers. Besides a maximum speed of around 20 km/h, this mode has a remote kill switch which will disable the car if it is further than 30 metres. The Expert mode  generates maximum output available and for the ultimate driving experience, a rally-style hydraulic handbrake is included.

2020 Aston Martin DB5 Junior

DB5 Vantage Junior
There is also the DB5 Vantage Junior available in the UK for £45,000 (around RM250,000) which has a powerful 10 kW (13.4 bhp) electric motor. This output is delivered to the wheels through a Limited-Slip Differential. Performance is further enhanced by the lightweight carbonfibre body and a second battery pack, doubling the range to between 32 and 64 kms.

First ‘Goldfinger’ Aston Martin completed, priced at RM17.7 million (w/VIDEO)

PISTON.MY

Race starts at 3:10 pm in Belgium/9:10 pm in Malaysia

After one weekend break, the 2020 Formula 1 World Championship begins its second three-in-a-row rounds with Round 7 at the historical Circuit de Spa-Francorchamps for the Belgium Grand Prix. The event is the 65th F1 World Championship round hosted by Belgium and is one of the original races from the 1950s season. However, the F1 races were not always held at Spa-Francorchamps and on 11 occasions, they were held at two other circuits.

The 7-km track with 19 turns is therefore familiar to the drivers and teams, with its outstanding features and characteristics leading to some interesting set-up decisions. The two long full-throttle sections of the first and third sectors require low drag – but the longer intricate middle sector, where much of the lap time is made or lost, makes for a complicated choice of downforce levels. If too high, the car cannot attack or defend on the long straights; too low and too much time is lost in the middle of the lap. Each team will therefore have different strategies and it is always interesting see which one proves suitable.

2020 F1 Belgium Grand Prix

Spa-Francorchamps is F1’s longest track with a lap distance of 7.004 kilometres. This tops the second circuit on the list, Baku (6.003 kms), by just over one kilometre. Because of its long lap distance, the Belgium GP has the lowest number of race laps in F1 with only 44 – making for a race distance of 308.05 kms. Also at this track, the drivers experience up to 5.2g (at Turn 10), which is the highest lateral g-force of the season.

2020 F1 Belgium Grand Prix - Red Bull Racing

Longest lap, few gear changes
Interestingly, despite having the longest lap in F1, the drivers only change gear 38 times for each circulation of Spa, one of the lowest figures in F1. This is particularly low when compared to the busy laps of Monaco where drivers will change gears around 50 times per lap – and that street track is less than half the length of Spa.

The main reason for the relatively low number of gear changes per lap is that a large portion of the lap at Spa is covered in top gear. Additionally, most of the corners that require gear changes come in groups – for example, Turn 5 to Turn 7. Over the length of the entire 7.004 kilometres of lap distance, there are only 6 sets of gear changes required.

2020 F1 Belgium Grand Prix

Prompted by a 2019 race in which no driver used the C1 tyre and seven of the ten points-scoring cars ran a one-stop strategy, Pirelli has brought a compound one notch down for this weekend’s racing, with the C2, C3 and C4 available to the teams.

Fresh engines installed
Another potential factor at this race is the use of fresh engines. The announcement of an extended calendar earlier this week takes the projected number of races up to 17 (originally 22) which is above the threshold that allowed competitors to use a third ICE, TC or MGU-H. Spa has traditionally been a race where teams install a new power unit anyway, and so this weekend may see a slight shift in running, especially in the ultra-tight midfield.

2020 F1 Belgium Grand Prix - Ferrari

2020 F1 Belgium Grand Prix - Williams

The championship positions
Lewis Hamilton continues to enjoy a commanding lead at the top of the Driver’ Championship table with 132 points. Behind him is Red Bull’s Max Verstappen who has 95 points after having taken 5 5 consecutive podium finishes. He is ahead of Valtteri Bottas who started the season well but now finds himself slipping and has so far collected only 89 points.

Once again, Mercedes-AMG is in a strong leading position in the Constructors’ Championship with 221 points. That’s 86 points ahead of Red Bull Racing. The teams to watch are Racing Point, McLaren and Ferrari: Racing Point has 63 points, just one point ahead of McLaren and two ahead of Ferrari.

Past winners
Michael Schumacher has had the most number of wins at the Belgium GP -2 with Benetton and 4 with Ferrari. The Ferrari team has had the most victories, 18 in all, which is 4 ahead of McLaren.

PISTON.MY

In 2020, virtually everyone has experienced some effects of their personal financial situation as a result of the COVID-19 pandemic. The government has done its best to help in various ways and companies, though also impacted by a business slowdown, has also tried doing its part.

Sime Darby Auto ConneXion (SDAC), the sole distributor for Ford in Malaysia, is helping Ford owners with money-saving initiatives and has announced its ‘Service Reward’ promotion which is on for 2 days. On September 1 and 2, 2020, 1,000 Service Reward vouchers will be on sale and these vouchers get up to 30% discount on after-warranty service costs.

SDAC Ford in Kota Kinabalu Sabah
Authorised Ford sales and service centre in Kota Kinabalu, Sabah

Valid for 18 months
Each Service Reward voucher costs just RM5 and is valid at all authorised Ford service centres for 18 months from the date of purchase. The Service Reward voucher can be purchased at any Ford Authorised Service Centres, while stocks last.

“We are always looking for ways to support our customers and reward them for their loyalty. In these uncertain times, as people resume their day-to-day activities, we hope these savings will help lighten their load while keeping them safe on the roads,” said Syed Ahmad Muzri Syed Faiz, MD of Sime Darby Auto ConneXion.

Savings when servicing
With the purchase of the ‘Service Reward’ voucher, customers can save 10% on engine oil on their first vehicle service, 20% on their second vehicle service and 30% on their third vehicle service.

During all 3 service intervals, customers will also get a 10% discount on the oil filter, air filter, fuel filter, battery and wiper blades as well as a 10% discount on labour. Only OEM (original equipment manufacturer) parts are used quality and reliability are assured.

As an extra benefit for safe motoring and peace of mind, SDAC will also provide owners with the Service Reward voucher a free 27-point vehicle inspection. This inspection will be conducted by Ford-certified technicians who will check to ensure their vehicles are in tip-top condition.

Book a service online
Ford owners can book a vehicle service appointment online by visiting www.sdacford.com.my and clicking the ‘Book a Service’ tab in the Owner section. They can specify the state they are located in and select their preferred service centre. Upon submission with their contact details and vehicle registration number, a confirmation email of the appointment will be sent.

In addition, the real-time e-Service Appointment booking is currently available at 7 Ford Authorised Service Centres in Peninsular Malaysia, Sabah and Sarawak. The locations are Ford Ara Damansara, Ford Petaling Jaya 2, Ford Juru, Ford Butterworth, Ford Kuching, Ford Kota Kinabalu and Ford Tawau. Owners can schedule a service appointment up to 1 month in advance. To make a real-time e-Service Appointment booking, visit www.sdacford.com.my/book-a-service-form.

BHPetrol Euro5 Diesel

In addition to booking a service appointment online, owners can also schedule their service appointments by calling an authorised Ford Service Centre directly.

For more information on the 2-day ‘Service Reward’ promotion or Ford services from SDAC, visit www.sdacford.com.my.

Ford owners can now do real-time service booking with Sime Darby Auto ConneXion

PISTON.MY

The Bentley Continental range was born in 2003 and with each new generation, the boundaries of technology and power continue to extend. The third generation, unveiled at the 2017 Frankfurt Motorshow, is currently one of the brand’s most popular models globally. It is this generation, with its sporty design and sleek silhouette that is the basis of a miniature collection created by the company.

The collection of Continental GT model cars put a piece of Bentley history in the home or office, and would certainly be a perfect accompaniment to an owner’s full-size Continental GT, if he or she already owns one.  The collection is available in a variety of scales – 1:8, 1:43 and 1:64 – and meticulous attention to detail and thousands of hours of work go into crafting the exquisite models.

Bentley Continental GT scale model collection

The 1:8 scale model, priced in the UK at £6,995 (RM38,700), is offered as a bespoke product, allowing customers to commission their own unique replica car in the same way a customer would personalise their Bentley. The intricately detailed scale model is made up of over 1,000 individual pieces, assembled by hand and takes over around 300 hours in total to build.

The bespoke options cover a variety of aspects available to customise including paint, mock veneers and seat details. Every detail selected is executed and installed to the same superlative quality that is guaranteed with each full-size Bentley.

Measuring 78 cm in length and 40 cm in width, the exacting details of a full-size car are mimicked in miniature throughout the carefully-crafted replica cabin. The tiny steering wheel features impeccably-copied cross-stitching, the iconic seat quilting and fluting is mirrored on the small yet detailed scale. The model car even mimics the lustrous wood veneers and plush carpets that characterise the original. All colours and finishes are precision-matched to Bentley’s authentic paints, leathers, woods and other materials.

Bentley Continental GT scale model collection

Bentley Continental GT scale model collection

The full list of options includes exterior paint colour, wheels and alloys, lower grille, brake calipers, number plate, left or right driver position, interior colour split, main hide colour, secondary hide colour, seat quilting, seat fluting, veneers, and carpets. The option for the iconic Blackline Specification is also available.

To ensure complete accuracy, each 1:8 model ordered is developed under the close supervision of the Bentley Design Studio from the moment of order to final delivery. The model is crafted in resin and placed on a varnished plinth. It is the largest of the Continental GT collection of miniature models.

Bentley Continental GT scale model collection

For those who do not choose the 1:8 scale model, the 1:43 and smaller 1:64 die-cast models are also of high quality commensurate with the brand image. In the UK, they are priced at £85 and £12 (RM470 and RM66), respectively. Orders can be placed from Bentley Retailers or via shop.BentleyMotors.com.

The fastest Lamborghini is now available as a LEGO Technic model (w/VIDEO)

COVID-19

Social distance

PISTON.MY

 

Archive

Follow us on Facebook

Follow us on YouTube