Piston.my

English

BRABUS declares itself to be the world’s largest independent automotive tuner for more than 4 decades and during that time, it has established a reputation for raising the performance levels of Mercedes-Benz models. Its expertise in petrol and diesel internal combustion engines (ICE) is considerable but with the industry moving towards electrification, will the company be able to continue its business of providing performance upgrades?

BRABUS Electric concept

The answer would be yes and BRABUS is already showing that it can do for electrically-powered cars what it has done for ICE cars. In fact, it already has a Zero Emission Division for some time now and this division began looking at the EQC 400 4MATIC by Mercedes-Benz when it arrived on the market.

It has developed a performance upgrade for the EQC’s electric powertrain and delivers even more agile driving dynamics. Known as the E-PowerXtra performance upgrade, output goes up by another 10 kW to 310 KW (416 bhp) and peak torque is raised to 830 Nm from 760 Nm. As a result, the 5-door SUV can zip from standstill to 100 km/h within a claimed 4.9 seconds. The top speed remains limited to 180 km/h.

BRABUS Electric concept

The upgrade is designed to become active when the driver selects drive mode ‘S’ with the standard DYNAMIC SELECT switch. When drive mode ‘E’ is active, , the PowerXtra ELECTRIC upgrade offers ‘one pedal driving’, a feature often requested by drivers of electric vehicles. The SUV decelerates sharply when the driver just lifts off the accelerator pedal. This requires far less frequent use of the brakes in normal traffic and further increases the energy recovery rate.

BRABUS Electric concept

While the aerodynamic-enhancement kit with the exception of the already available rear spoiler is still under development, the appearance can already be upgraded with tailor-made BRABUS Monoblock Z alloy wheels with diameters of 20 or 21 inches. The eCrossover can be refined with two variants of the sporty and elegant 10-spoke design available for this model.

The BRABUS Monoblock Z PLATINUM EDITION wheels with 21-inch diameter are even more exclusive. The product of a high-tech forging process, these rims offer a combination of lightweight construction and maximum strength. The front axle runs on size 9Jx21 wheels with 255/40R21 ContiSportContact tyres of size. The rear fender wells accommodate forged 10.5Jx21 rims with tyres sized at 285/35R21.

BRABUS Electric concept

BRABUS Electric concept

As for all Mercedes-Benz models, BRABUS offers a host of custom refinement options for the interior of the EQC 400 4MATIC that include an exclusive fine leather interior crafted by the company’s own upholstery shop.

BRABUS offers exclusive options for the interior that create numerous possibilities for the customer. The line-up ranges from aluminium pedals and door-lock pins to scuff plates with backlit BRABUS logo in changing colours and a complete redesign of the cockpit.

2018 Mercedes-Benz EQC 400 4MATIC
The Mercedes-Benz EQC 400 4MATIC made its global debut 2 years ago.

The other side of the BRABUS business – armoured SUVs

PISTON.MY

x

OBITUARY

We are very sad to learn that Osamu Masuko, special adviser and former Chairman of the Board of Mitsubishi Motors Corporation (MMC), passed away on August 27 at the age of 71 due to heart failure. The news was only issued in an official statement by the company today, although Mr. Masuko’s funeral took place earlier.

Originally from Mitsubishi Corporation, the trading company, Mr. Masuko was appointed as the President of MMC in January 2005. He developed and implemented the Mitsubishi Motors Revitalization Plan and was largely credited with revitalizing the company when its image was seriously damaged due to what was regarded as a cover-up of defects for a long period.

He led the development of advanced environment-friendly vehicles including the world’s first mass-produced electric vehicle, the i-MiEV, as well as the world’s first 4WD SUV plug-in hybrid EV, the Outlander PHEV.

In the ASEAN region, he promoted in local production and expanded sales, particularly in Thailand which is the production hub for the Triton. In addition, in 2016, he built solid relationships with the Alliance companies (Renault and Nissan) and the Mitsubishi Group, establishing close cooperation and sharing resources.

Our condolences to his family and may he rest in peace.

BHPetrol Euro5 Diesel

BHPetrol RON95 Euro4M

The Pikes Peak International Hillclimb was held over the weekend and this year didn’t see any automakers participating. It’s a tough year for the auto industry and budgets are obviously reduced, and with the COVID-19 restrictions, entry for travellers from Europe is also not allowed. So the event has been largely a ‘domestic’ one like what it was for many decades before Audi and Peugeot stormed the peak in the 1980s. This year, there is also no motorcycle category as it has been deemed too dangerous for two-wheelers.

Coincidentally, over in England, the first of a limited run of 15 units of the Pikes Peak Continental GT by Mulliner has just been completed. Announced last year, the  limited edition of the Continental GT was to celebrate the record-breaking run of a standard Continental GT at Pikes Peak in 2019. A base-spec Continental GT starts at £159,100 (about RM883,000) in the UK and these cars would cost considerably more.

2020 Bentley Continental GT Pikes Peak

Fastest production car up Pikes Peak
The Grand Tourer shaved 8.4 seconds off the previous record along the 19.98-km course, making it the fastest production car ever to compete in the Pikes Peak International Hillclimb event. Driven by 3-time champion, former ‘King of the Mountain’ Rhys Millen, the W12-powered Continental GT climbed almost 5,000 ft through 156 bends in just 10 minutes, 18.4 seconds.

The limited edition features exclusive Radium by Mulliner paintwork, carbonfibre body kit, Acid Green brake disc callipers, and Pirelli P Zero Colour Edition Tyres. Gloss black detailing has also been added to the front lower bumper inserts, roof panel, wing mirrors and rear surfaces. 35% of the buyers (who are situated around the world) also specified the optional mountain decal, the same as the record-holding car.

2020 Bentley Continental GT Pikes Peak

While 22-inch Mulliner Driving Specification wheels in Gloss Black are standard, there’s an optional ‘100’ grille as a reminder that the Continental GT’s impressive hillclimb achievement took place in Bentley’s centenary year.

Sporting theme from competition car
Inside the cabin, Alcantara with contrasting Radium thread stitching adorns much of the soft trim areas, matched with Beluga hide. The steering wheel features a honeycomb stitching design and a centre stripe both in Radium, as per the Pikes Peak GT race car. Carbonfibre fascias and waistrails are complemented by a Piano Black centre console, all adding to the sporting theme.

2020 Bentley Continental GT Pikes Peak

The passenger-side fascia features a graphic showing a section of the Pikes Peak track, with 5 different graphics being used across the 15 cars being made, along with the record-setting time.

2020 Bentley Continental GT Pikes Peak

2020 Bentley Continental GT Pikes Peak

Pikes Peak embroidery to the seat headrests in Radium stitching, Radium contrast binding on the overmats, Pikes Peak treadplates and exclusive B&O speaker covers in Black Anodised and Radium finish further enhance the interior appeal. The Continental GT’s luxurious cabin includes the Bentley Rotating Display, deep pile overmats and Front Seat Comfort Specification.

Same W12 engine
Under the bonnet is essentially the same engine as the car that Millen drove. The mighty 12-cylinder petrol engine develops 626 bhp/900 Nm which can take the Continental GT from 0-100 km/h in a claimed 3.7 seconds and on to a top speed of 333 km/h.

At the 2018 Pikes Peak Hillclimb, Millen claimed the outright record for a production SUV with a Bentayga when he did the run in 10:49.9.

Bentley Continental GT breaks record at Pikes Peak

PISTON.MY

♦ McLaren’s Carlos Sainz Jr. didn’t get to race as exhaust failure while driving for the grid line-up forced him to instead return to the pits just before the start.

♦ Rain was headed towards the circuit but the start of the race was in dry conditions.

♦ The first crash took place during lap 11, bringing out the Safety Car. Giovinazzi’s Alfa Romeo was starting to spin and Russell (Williams) tried to avoid him but could not and crashed into the wall, with Giovanazzi doing the same a second later.

♦ Pierre Gasly and Sergio Perez chose not to head for the pits to get fresh tyres while the rest of the cars came in while the Mercedes-AMG Safety Car was out for about 3 laps. Gasly would only bring his Scuderia Alphatauri Honda in on the 27th lap, the last driver to do so.

♦ Charles Leclerc was required to meet the Stewards after the race as he was seen to be ‘driving unnecessarily slowly’ during the reconnaissance lap.

♦ At the halfway mark, Lewis Hamilton had a 3-second lead over team mater Valtteri Bottas, and was about 7.5 seconds ahead of Max Verstappen. The top three were essentially on their own as the gap after the Dutch Red Bull driver was about 16 seconds to Daniel Ricciardo.

♦ On lap 28, Hamilton’s car was spotted having a damaged wing and at the same time, the team sent a message to Bottas which suggested he was to push as hard as he could.At that point, Hamilton was still 3.7 seconds ahead.

♦ In the last few laps of the race, Hamilton expressed concerns about the front tyres, fearing a repeat of Silverstone – which wasn’t good at a track with such a long lap. But he managed the tyres as best as he could and crossed the finish line for his fourth win at Spa.

PISTON.MY

l

 

Aston Martin’s DB5 is well known as the ‘James Bond car’, having appeared as a gadget-packed sportscar in the movie ‘Goldfinger’ (as well as ‘Skyfall’). Only 1,059 units were produced and sold between 1963 and 1965, so it is a rare model. As part of its Continuation program, the company is currently making 25 units of the ‘Goldfinger’ car, complete with the array of gadgets, priced at the equivalent of RM17.7 million.

While the original DB5 is not readily available and only 25 people will get to own the Goldfinger cars, there is now the DB5 Junior, a two-thirds scale replica that runs on electric power. It is the result of a collaboration between Aston Martin and The Little Car Company and based on Aston Martin’s reference 3D scan of an original DB5 to ensure complete accuracy and authenticity.

2020 Aston Martin DB5 Junior

Developed over the last 15 months as a collaboration between the two companies, the junior car is priced at £35,000 (about RM195,000). Like all Aston Martin models, customisation of the DB5 Junior is possible in almost the same manner. Only 1,059 units will be available  – the same production volume as the original DB5 – on a first-come, first served basis with a refundable deposit required.

2020 Aston Martin DB5 Junior

The DB5 Junior is around 3 metres long, and 1.1 metres wide. It is designed to easily accommodate an adult and a child side by side. The aluminium honeycomb chassis and composite body provide a very rigid platform whilst keeping the total weight down to around 270 kgs.

Absolute authenticity was key throughout the development of the car. For example, the DB5 Junior sports the same iconic Aston Martin ‘wings’, ‘shield’ and DB5 badges as the original 1963 model. Like its big brother, the dashboard is filled with functional Smiths instruments, which have been cleverly updated for the modern era.

2020 Aston Martin DB5 Junior

The fuel gauge has been converted into a battery meter, while the oil temperature now monitors the temperature of the electric motor. Finally, the same Smiths clock as seen in the original 1960s car sits proudly in front of the passenger seat.

The perfect two-thirds scale steering wheel has a racing-style quick release to make entry and exit easier for the driver. Power is regulated by billet aluminium accelerator and brake pedals and, as would be expected, there are working headlights, brake lights, indicators and a horn. However, there are no 007 gadgets which is a pity.

In true DB5 style, the car comes in the famous Silver Birch colour as standard, with a full black leather interior and carpet set. There is even a boot at the rear for storage.

Like the real car, the DB5 Junior sits on double wishbone suspension at the front  and even the roll centre and camber gain match the original geometry. At the rear, there is a live axle that is of the 1960s period, with authentic upper and lower trailing arm suspension and Panhard rod.

2020 Aston Martin DB5 Junior

Behind each of the 10-inch wire wheels are ventilated disc brakes. Like modern hybrid and all-electric cars, there is regenerative braking which contributes to recharging of the battery pack.

Powered by a torquey electric powertrain delivering 5 kW (6.7 bhp) to the rear wheels, the DB5 Junior can zip to a maximum speed of almost 50 km/h. The removable battery pack under the bonnet is said to provide 16 to 32 kms driving range, depending on how the car is driven. A second battery can be added for extra range and replacement of each pack is easily done in seconds.

For safety, there are three modes to suit the skill of the driver, with the power output reduced to 1 kW (1.3 bhp) for less experienced drivers. Besides a maximum speed of around 20 km/h, this mode has a remote kill switch which will disable the car if it is further than 30 metres. The Expert mode  generates maximum output available and for the ultimate driving experience, a rally-style hydraulic handbrake is included.

2020 Aston Martin DB5 Junior

DB5 Vantage Junior
There is also the DB5 Vantage Junior available in the UK for £45,000 (around RM250,000) which has a powerful 10 kW (13.4 bhp) electric motor. This output is delivered to the wheels through a Limited-Slip Differential. Performance is further enhanced by the lightweight carbonfibre body and a second battery pack, doubling the range to between 32 and 64 kms.

First ‘Goldfinger’ Aston Martin completed, priced at RM17.7 million (w/VIDEO)

PISTON.MY

Race starts at 3:10 pm in Belgium/9:10 pm in Malaysia

After one weekend break, the 2020 Formula 1 World Championship begins its second three-in-a-row rounds with Round 7 at the historical Circuit de Spa-Francorchamps for the Belgium Grand Prix. The event is the 65th F1 World Championship round hosted by Belgium and is one of the original races from the 1950s season. However, the F1 races were not always held at Spa-Francorchamps and on 11 occasions, they were held at two other circuits.

The 7-km track with 19 turns is therefore familiar to the drivers and teams, with its outstanding features and characteristics leading to some interesting set-up decisions. The two long full-throttle sections of the first and third sectors require low drag – but the longer intricate middle sector, where much of the lap time is made or lost, makes for a complicated choice of downforce levels. If too high, the car cannot attack or defend on the long straights; too low and too much time is lost in the middle of the lap. Each team will therefore have different strategies and it is always interesting see which one proves suitable.

2020 F1 Belgium Grand Prix

Spa-Francorchamps is F1’s longest track with a lap distance of 7.004 kilometres. This tops the second circuit on the list, Baku (6.003 kms), by just over one kilometre. Because of its long lap distance, the Belgium GP has the lowest number of race laps in F1 with only 44 – making for a race distance of 308.05 kms. Also at this track, the drivers experience up to 5.2g (at Turn 10), which is the highest lateral g-force of the season.

2020 F1 Belgium Grand Prix - Red Bull Racing

Longest lap, few gear changes
Interestingly, despite having the longest lap in F1, the drivers only change gear 38 times for each circulation of Spa, one of the lowest figures in F1. This is particularly low when compared to the busy laps of Monaco where drivers will change gears around 50 times per lap – and that street track is less than half the length of Spa.

The main reason for the relatively low number of gear changes per lap is that a large portion of the lap at Spa is covered in top gear. Additionally, most of the corners that require gear changes come in groups – for example, Turn 5 to Turn 7. Over the length of the entire 7.004 kilometres of lap distance, there are only 6 sets of gear changes required.

2020 F1 Belgium Grand Prix

Prompted by a 2019 race in which no driver used the C1 tyre and seven of the ten points-scoring cars ran a one-stop strategy, Pirelli has brought a compound one notch down for this weekend’s racing, with the C2, C3 and C4 available to the teams.

Fresh engines installed
Another potential factor at this race is the use of fresh engines. The announcement of an extended calendar earlier this week takes the projected number of races up to 17 (originally 22) which is above the threshold that allowed competitors to use a third ICE, TC or MGU-H. Spa has traditionally been a race where teams install a new power unit anyway, and so this weekend may see a slight shift in running, especially in the ultra-tight midfield.

2020 F1 Belgium Grand Prix - Ferrari

2020 F1 Belgium Grand Prix - Williams

The championship positions
Lewis Hamilton continues to enjoy a commanding lead at the top of the Driver’ Championship table with 132 points. Behind him is Red Bull’s Max Verstappen who has 95 points after having taken 5 5 consecutive podium finishes. He is ahead of Valtteri Bottas who started the season well but now finds himself slipping and has so far collected only 89 points.

Once again, Mercedes-AMG is in a strong leading position in the Constructors’ Championship with 221 points. That’s 86 points ahead of Red Bull Racing. The teams to watch are Racing Point, McLaren and Ferrari: Racing Point has 63 points, just one point ahead of McLaren and two ahead of Ferrari.

Past winners
Michael Schumacher has had the most number of wins at the Belgium GP -2 with Benetton and 4 with Ferrari. The Ferrari team has had the most victories, 18 in all, which is 4 ahead of McLaren.

PISTON.MY

In 2020, virtually everyone has experienced some effects of their personal financial situation as a result of the COVID-19 pandemic. The government has done its best to help in various ways and companies, though also impacted by a business slowdown, has also tried doing its part.

Sime Darby Auto ConneXion (SDAC), the sole distributor for Ford in Malaysia, is helping Ford owners with money-saving initiatives and has announced its ‘Service Reward’ promotion which is on for 2 days. On September 1 and 2, 2020, 1,000 Service Reward vouchers will be on sale and these vouchers get up to 30% discount on after-warranty service costs.

SDAC Ford in Kota Kinabalu Sabah
Authorised Ford sales and service centre in Kota Kinabalu, Sabah

Valid for 18 months
Each Service Reward voucher costs just RM5 and is valid at all authorised Ford service centres for 18 months from the date of purchase. The Service Reward voucher can be purchased at any Ford Authorised Service Centres, while stocks last.

“We are always looking for ways to support our customers and reward them for their loyalty. In these uncertain times, as people resume their day-to-day activities, we hope these savings will help lighten their load while keeping them safe on the roads,” said Syed Ahmad Muzri Syed Faiz, MD of Sime Darby Auto ConneXion.

Savings when servicing
With the purchase of the ‘Service Reward’ voucher, customers can save 10% on engine oil on their first vehicle service, 20% on their second vehicle service and 30% on their third vehicle service.

During all 3 service intervals, customers will also get a 10% discount on the oil filter, air filter, fuel filter, battery and wiper blades as well as a 10% discount on labour. Only OEM (original equipment manufacturer) parts are used quality and reliability are assured.

As an extra benefit for safe motoring and peace of mind, SDAC will also provide owners with the Service Reward voucher a free 27-point vehicle inspection. This inspection will be conducted by Ford-certified technicians who will check to ensure their vehicles are in tip-top condition.

Book a service online
Ford owners can book a vehicle service appointment online by visiting www.sdacford.com.my and clicking the ‘Book a Service’ tab in the Owner section. They can specify the state they are located in and select their preferred service centre. Upon submission with their contact details and vehicle registration number, a confirmation email of the appointment will be sent.

In addition, the real-time e-Service Appointment booking is currently available at 7 Ford Authorised Service Centres in Peninsular Malaysia, Sabah and Sarawak. The locations are Ford Ara Damansara, Ford Petaling Jaya 2, Ford Juru, Ford Butterworth, Ford Kuching, Ford Kota Kinabalu and Ford Tawau. Owners can schedule a service appointment up to 1 month in advance. To make a real-time e-Service Appointment booking, visit www.sdacford.com.my/book-a-service-form.

BHPetrol Euro5 Diesel

In addition to booking a service appointment online, owners can also schedule their service appointments by calling an authorised Ford Service Centre directly.

For more information on the 2-day ‘Service Reward’ promotion or Ford services from SDAC, visit www.sdacford.com.my.

Ford owners can now do real-time service booking with Sime Darby Auto ConneXion

PISTON.MY

The Bentley Continental range was born in 2003 and with each new generation, the boundaries of technology and power continue to extend. The third generation, unveiled at the 2017 Frankfurt Motorshow, is currently one of the brand’s most popular models globally. It is this generation, with its sporty design and sleek silhouette that is the basis of a miniature collection created by the company.

The collection of Continental GT model cars put a piece of Bentley history in the home or office, and would certainly be a perfect accompaniment to an owner’s full-size Continental GT, if he or she already owns one.  The collection is available in a variety of scales – 1:8, 1:43 and 1:64 – and meticulous attention to detail and thousands of hours of work go into crafting the exquisite models.

Bentley Continental GT scale model collection

The 1:8 scale model, priced in the UK at £6,995 (RM38,700), is offered as a bespoke product, allowing customers to commission their own unique replica car in the same way a customer would personalise their Bentley. The intricately detailed scale model is made up of over 1,000 individual pieces, assembled by hand and takes over around 300 hours in total to build.

The bespoke options cover a variety of aspects available to customise including paint, mock veneers and seat details. Every detail selected is executed and installed to the same superlative quality that is guaranteed with each full-size Bentley.

Measuring 78 cm in length and 40 cm in width, the exacting details of a full-size car are mimicked in miniature throughout the carefully-crafted replica cabin. The tiny steering wheel features impeccably-copied cross-stitching, the iconic seat quilting and fluting is mirrored on the small yet detailed scale. The model car even mimics the lustrous wood veneers and plush carpets that characterise the original. All colours and finishes are precision-matched to Bentley’s authentic paints, leathers, woods and other materials.

Bentley Continental GT scale model collection

Bentley Continental GT scale model collection

The full list of options includes exterior paint colour, wheels and alloys, lower grille, brake calipers, number plate, left or right driver position, interior colour split, main hide colour, secondary hide colour, seat quilting, seat fluting, veneers, and carpets. The option for the iconic Blackline Specification is also available.

To ensure complete accuracy, each 1:8 model ordered is developed under the close supervision of the Bentley Design Studio from the moment of order to final delivery. The model is crafted in resin and placed on a varnished plinth. It is the largest of the Continental GT collection of miniature models.

Bentley Continental GT scale model collection

For those who do not choose the 1:8 scale model, the 1:43 and smaller 1:64 die-cast models are also of high quality commensurate with the brand image. In the UK, they are priced at £85 and £12 (RM470 and RM66), respectively. Orders can be placed from Bentley Retailers or via shop.BentleyMotors.com.

The fastest Lamborghini is now available as a LEGO Technic model (w/VIDEO)

COVID-19

Social distance

PISTON.MY

 

Ford and its Team Fordzilla esports team have unveiled a world-first at this year’s gamescom event which is described as ‘the ultimate virtual racing car’. Designed with collaboration between Ford designers and the gaming community, the car was developed under the codename ‘Project P1’.

It was then created with fan votes on Twitter at different design stages. Gamers decided on elements including seating position, cockpit style and drivetrain before Ford designers worked up their interpretations of the brief.

Two designs were put forward for the final poll, with the car by Ford exterior designer Arturo Arino emerging victorious, gaining 83.8% of the votes. Close to 225,000 fans let their preferences be known throughout the polling process.

Inspired by the Ford GT
With inspiration from the Ford GT, Arino’s design employs unique touches like morphing technology on the body to offer the stability of a longtail racer on the high-speed straights of Le Mans, or a shorter body for tighter circuits like Monaco. For fans wondering when they may get to drive the vehicle in-game, Ford hinted that it is in advanced discussions with a major games developer to introduce it into a popular racing game in 2021.

“Project P1 took me to the beginning of it all. The reason why I became a car designer in the first place was to design something never seen before and something that pushes the boundaries. This vehicle will be visually stunning, and while it will push the gamer to the limits of focus and reflexes, it will also be hugely rewarding to drive,” explained Arino.

Team Fordzilla

Ford also announced that it will build a scale model of the Team Fordzilla P1 concept before the end of the year, something it has already started to create at its design studios in Cologne, Germany. This is part of its continuing theme of exploring the parallels between the real-world and the virtual one, with learnings from design in the digital world being applied to concepts for reality.

Team Fordzilla

Fordzilla Cup
The final of the inaugural Fordzilla Cup will take place at gamescom this year. Qualifiers and heats have been taking place all week and will culminate with the first-ever champion crowned this weekend. The winner will get a professional contract with Team Fordzilla and have the chance to compete on some of the largest stages in gaming.

The launch of www.teamfordzilla.com during gamescom will provide a permanent home for Ford’s official eSports team. Fans will be able to follow live feeds of races, download vehicle graphics for use in-game and keep up-to-date with the latest news.

Team Fordzilla

Team Fordzilla
Team Fordzilla is Ford’s first ever esports team, inaugurated in 2019 with individual teams in France, Germany, Italy, Spain and the UK, consisting of hand-picked racers. Each team competes in national competitions with dedicated team captains, with the best drivers representing Team Fordzilla at a European level. Currently, over 40 drivers race under the Team Fordzilla banner.

“We showed again at gamescom this year that we’re serious about gaming, but what was really great is the continuing support we’re receiving from that gaming community. This really pushes us to keep innovating with projects like the Team Fordzilla P1 concept,” said Emmanuel Lubrani, Senior Manager Communications for Team Fordzilla at Ford Europe.

Visit www.sdacford.com.my to know more about Ford models you can buy and drive.

Ford forming racing teams in Europe to compete in esports competition [w/VIDEO]

PISTON.MY

Archive

Follow us on Facebook

Follow us on YouTube