Having been among the early carmakers to start electrifying their product line and since 2010, it has sold more than 300,000 electric vehicles in Europe. Renault continues to look ahead to the future of electric vehicles and mobility.
Revealing the next step in the brand’s broadening electrified vision is the Megane eVision, an innovative concept car based on the new modular CMF-EV (Common Module Family – Electric Vehicle) platform. The production version of the Megane eVision, to go on sale in 2020, will be the first Renault vehicle to make use of the new platform.
Highly variable platform
This new platform was specifically designed by the Alliance and has been rigorously tested over 3 million kilometres in France and Japan. It can accommodate a variety of vehicle bodies – from low saloons to larger SUVs – with different modular batteries can be fitted vertically and horizontally.
What will be consistent across all vehicles sitting on the CMF-EV platform is a flat floor, boosting interior practicality and modularity thanks to the lack of an exhaust system or standard transmission, making room for a more versatile cabin.
It is also modular in length with a wheelbase up to 2.77 metres available, offering engineers a vast scope for vehicles with more powerful batteries and longer driving range. The flexibility of the platform is further demonstrated by the ability to accommodate a second rear engine to provide 4-wheel drive capability.
The engine compartment is also more compact when compared with traditional combustion-engined vehicles, enabling an extended wheelbase with wheels pushed further to the edges of the vehicle. This allows a much roomier cabin environment as well as more design opportunities.
Powertrain and battery
The electric motor is one of the most powerful in the Renault range of any fuel type, delivering 160 kW of power (equivalent to 217 bhp) and 300 Nm of torque, to give a claimed acceleration time from 0 – 100 km/h in under 8 seconds.
Slimline battery packs located beneath the floor of the vehicle give a low centre of gravity. An innovative feature is that they are structural and form an integral part of the car, helping to absorb energy in the event of a side collision. They also have a higher energy density, enabling longer driving range and reduced charging times.
The 60 kWh battery pack thickness can be altered in order to best suit the car, meaning particular models can be designed to be perfectly fit for purpose. For example, a compact vehicle can be truly compact, while remaining highly efficient with increased driving range and improved energy efficiency.
Besides an advanced system for managing battery temperature and one of the thinnest batteries on the market, the Megane eVision also has a new ultra-compact powertrain. An optimised water-cooling Energy Recovery System captures the heat of the engine and battery to heat the passenger compartment without using energy from the battery. This ensures the driving range is not impacted by cold weather, maximising all available energy.
LIVINGTECH technological ecosystem
The interior showcases Renault’s LIVINGTECH technological ecosystem, an intuitive and smart interior environment that focuses on interacting with the passengers and catering to their needs and usage. The space within is comparable to a much larger vehicle in spite of the compact hatchback exterior. A slim and sleek LIVINGSCREEN instrument panel forms part of the interior design that combines design and practicality, with striking touches such as illuminated edges.
The 4.21-metre long Megane eVision has a hatchback design which is a modern interpretation and reinvention of the Megane name. It takes inspiration and details from the MORPHOZ concept car with the large wheels, body height and robust design reminiscent of an SUV.
The floating roof is finished in a unique gold colour gradient that starts from the front windscreen pillar, giving an impression of lightness, accentuating the car’s sleek profile. The highly sculpted bonnet features two air inlets, enhancing the illuminated Renault logo, while the 20-inch alloy wheels are finished in the shape of propeller blades.
Renault MORPHOZ – the car that changes shape according to needs! (w/VIDEO)
For those who are planning to buy the new Nissan Almera Turbo, Edaran Tan Chong Motor (ETCM), has announced the availability and pricing of Optional Accessory Packages that consist of items customised for the new model.
There are 3 packages, priced from RM400 to RM2,750, and all the items come with a 3-year/100,000 km warranty. Even better, the cost of the package can be included in the H-P loan taken, so you pay for it in instalments as well.
The packages are shown below and include Protection Packages as well:
Items can also be purchased separately
For those who prefer to buy just some of the items and not take a whole package, ETCM will also sell them separately although there are savings of up to 31% if you take them as a package. The individual items available are shown in the chart below:
The new Almera Turbo, with a small but advanced HR10DET turbocharged engine, is very different from the model it replaces. ETCM believes it can ‘Challenge All Beliefs’ with innovative technologies and features that will be appreciated by today’s buyers.
If you test-drive the new model (at selected Nissan showrooms), you could win one of 15 iPhone SE (128GB) smartphones worth RM2,199 each. To find out which showrooms have an Almera Turbo for viewing and test-drive visit www.almeraturbo.com.my.
First Look at the all-new Nissan Almera Turbo (N18), with brief driving impressions
With the rising number of COVID-19 cases and now the imposition of CMCO in the Klang Valley for 2 weeks, companies and event organisers are reviewing their activities in the next few months. One of them is Art of Speed Malaysia (AOS) which had an event planned for November 12, 2020 at the 1 Utama Shopping Centre in Petaling Jaya, Selangor.
With the CMCO in operation, the organisers have decided to postpone the 9th Annual Art of Speed Malaysia event to run from December 30 until January 3, 2021. The venue will remain at the 1Utama Shopping Centre as the AOS people are satisfied that ‘the shopping centre’s proactive actions and readiness to host the event have been exemplary’.
The date for the Hot Wheels Legends Tour Malaysia Virtual Finals will remain unchanged on November 12, 2020 as it is essentially an online event. The jury will consist of judges from Malaysia and the USA and judging will be done LIVE online, with the winner being announced on the same day.
“Throughout this pandemic, we have been working behind the scenes with various parties to ensure our decisions are for the best interest of all involved especially with regards to health and safety. We can only pray that this new wave will soon subside, and we can continue with our plans to support the various communities and industries that contribute so much to the socio economic fabric of Malaysia,” the organisers said.
Malaysia is first stop in Asia for 2020 Hot Wheels Legends Tour
Proton reports that one of its employees was tested positive for COVID-19 on October 14, 2020. The employee, who is from the Research & Development Department in Shah Alam, was immediately put under the care of a government facility.
The company, which has been strictly adhering to the protocols issued by the authorities, immediately put into place its mitigation plans to ensure prevention of further spread. Contact tracing was initiated begun and all employees from the respective departments have been asked to stay away from the office and self-quarantine. This is being followed by deep cleansing and a disinfection of the premises and any suspected areas.
Proton states that the employee concerned was not in any way regularly interacting with customers and therefore there is a lower concern about direct exposure to the public.
The company reassures all its customers that it will continue to strictly follow all guidelines and procedures laid out by the authorities as it has been doing from the start of the pandemic. It will continue to monitor the situation closely before deciding on any further course of action, if necessary.
The safety of all Proton staff, customers and Malaysians is of the utmost importance to the company and will be its main priority, it said in a statement issued this afternoon.
With a Conditional Movement Control Order (CMCO) now in force in Klang, Kuala Lumpur, Putrajaya, Selangor and Sabah, Mercedes-Benz Malaysia and Mercedes-Benz Services Malaysia informs the public of the following measures with Mercedes-Benz Star Shield from October 14 to October 27, 2020.
The Star Shield Programme
The Mercedes-Benz Star Shield programme is a safety protocol for Mercedes-Benz dealers and customers. It consists of a comprehensive safety plan that includes social distancing, provision of masks and hand sanitizers, cleaning and sanitization of showroom cars and common areas, temperature checks and limit on customers present.
During this CMCO period, all authorized Mercedes-Benz dealerships nationwide will remain open for business as usual. They will, however, strictly adhere to the guidelines set by the government for the protection of customers as well as their own employees.
Customers can still request for test-drives, while owners can bring their vehicles in for routine service and maintenance and/or repairs at service centres. The Standard Operating Procedures (SOPs) that have been observed for some months continue to apply.
24-hour support service
Customers can still obtain 24-Hour Roadside Assistance for emergency breakdowns and technical issues. They can call 1-800-88-1133 at any time of the day for support.
In order to minimize social contact, the Mercedes-Benz Star Shield also includes initiatives such as the Drop & Go, Door-to-door and Express Service.
Click here for other news and articles about Mercedes-Benz.
With Henry Ford’s mass production approach of making cars having created thousands of similarly looking cars daily, individual identification became difficult unless you looked at the numberplate. However, there has been one element which has provide some degree of differentiation between cars of the same design – the colour.
Ford initially offered his Model T only in black, for economic as well as efficiency reasons, but generally, manufacturers have offered a choice of exterior body colours to provide variety for customers.
However, despite a great variety, buyers still tend to choose certain colours and according to a study by AkzoNobel, those in Southeast Asia prefer black, grey and white. The decorative paint and coatings company’s study also showed that 22% of respondents chose black as their favourite colour, with 21% and 19% choosing white and grey, respectively.
To the older generation, black may not be a ‘good’ colour but today, it is seen as representing ‘power’, ‘ambition’ and ‘wealth’. Luxury brands such as BMW and McLaren, which have AkzoNobel coating on their vehicles, often use black in their branding.
BMW uses them on some of their products and car parts, while McLaren chooses AkzoNobel’s automotive paint for all its production road cars. Often, special editions are also finished in black, one recent example being the anniversary edition of the Proton Saga.
On the opposite end of the spectrum, there is white. It goes without saying that cars tend to look good in white, a colour that is often associated with purity and cleanliness. On a more practical level, if you can recall from the science lessons during your primary school days, white surfaces are great heat and light reflectors. This means white cars don’t absorb as much heat from sunlight.
By extension, the inside of the car won’t become so hot after spending some time out in the open during a sunny day – certain something Malaysians would welcome.
The colour is also widely preferred as white cars are known to often have a high resale value. If the mileage is not too high and the condition is good, then a better asking price is possible!
Grey can be considered as a ‘diplomatic’ colour, a balance between black and white. Car owners driving grey cars are likely to be modest and humble individuals who are often happy to blend into the crowd. The colour is simple and easy to maintain and scratches are not as noticeable when compared to other coloured cars.
Although most people don’t realise it, automotive paint is quite a complex fluid. Years of R&D go into paint formulations to ensure that the colours remain outstanding long into the future. Companies like Sikkens – a brand under AkzoNobel – specialise in vehicle refinish systems that can offer protection comparable to the original paint finish a car comes with from the factory.
There may be a CMCO (Conditional Movement Control Order) on now but business goes on and having adapted to the ‘new normal’, some car companies are using the internet to launch their new models. It’s a safe way to do so as there are no crowds in a hall and the reach is also quite wide. Volkswagen Passengers Cars Malaysia (VPCM) was among the early ‘adopters’, having even organised online sessions to talk to the motoring media during the MCO period earlier in the year.
So with a new model – the Volkswagen Passat R-Line – to launch, the company used its social media channels today to do a live telecast with VPCM’s Managing Director, Erik Winter, and Julie Woon doing the presentation.
Priced at RM203,411.18 (without sales tax until the end of the year), the new R-Line variant is the sportier big brother of the Passat Elegance that was launched earlier. It is also assembled at the assembly facility in Pekan, Pahang.
R-Line variants are not new to Malaysia but in earlier years, they were not promoted so much. However, with the high-performance R division in Germany aiming to grow its business, R-Line offerings have increased and VPCM has found the additional sportiness of the variants to appeal to many customers.
While having the same body design as the Passat Elegance, the Passat R-Line has an overall appearance oriented towards sportiness. To achieve this, it has R-Line front and rear bumpers, chrome trim and 19-inch Verona alloy wheels.
The LED lighting is advanced for safer motoring and also generates a ‘signature’ with the day running lights as well as front and rear sequential turn signals.
R-Line identity inside
As for the interior, the R-Line people have chosen Nappa carbon-style black leather upholstery for the seats, steering wheel (with shift paddles) and provide aluminium sports pedals as well as a black roof headliner. The Passat R-Line also sets itself apart with new finishes and materials, including new Dark Diamond Flag decorative trim.
But convenience and comfort are not forgotten and there are also features such as an 11.7-inch Digital Cockpit that can be personalised with different screens, Apple Car Play/Android Auto, and even 14-way adjustment for the front seats. The driver’s seat also comes with a massage function.
VPCM has also added in a complimentary Helix 300W Soundbar (worth RM2,400) which is installed in the 586-litre boot. This Volkswagen Approved Accessory is a 5-channel amplifier with an integrated sound processor and subwoofer, which elevates the vehicle’s already-advanced sound system to a higher level.
New 320-Nm TSI engine
Under the bonnet is a new 2.0TSI turbocharged engine with an output of 190 ps/320 Nm. It is fitted with a new and improved 7-speed wet clutch direct shift gearbox (DSG) that has longer oil change intervals.
In the past, if you wanted to have more dynamic handling, you could only change the shock absorbers to a sports type. Now with more electronic systems, a driver can tune the car’s handing characteristics quite extensively.
With the Dynamic Chassis Control, there are up to 15 selectable increments or the driver can just choose a pre-packaged mode. Additionally, the Driving Mode Selection can vary the powertrain characteristics to suit personal preference from economical motoring to strong acceleration.
This weekend (October 17/18), Volkswagen dealerships nationwide will be hosting a virtual event featuring detailed walk-throughs of the new Passat R-Line where customers are invited to send in their questions and interact with Sales Consultants via Facebook Live from the comfort and safety of their own homes.
Order online and save money
Customers who place a booking during this weekend will enjoy additional RM2,000 rebate on top of RM3,500 savings currently offer for the full Passat range – via the Volkswagen eShowroom. There will also be an additional RM1,000 rebate on other Volkswagen models, with the exception of the Polo.
Travis Pastrana, Subaru Motorsports USA’s driver, aims to take Gymkhana to the next level, with an outrageous WRX STI. His custom-built tyre destroyer is set to star in the next instalment of Hoonigan’s Gymkhana video series.
Back to the Gymkhana roots
Subaru and Hoonigan announced back in May that Pastrana would take over the Gymkhana series for 2020, bringing the series back to its roots, but promising a new take on the Gymkhana concept. With Pastrana’s decades of experience in rally, rallycross, supercross, freestyle motocross, NASCAR and stunts, Subaru was tasked with delivering a vehicle that could do things no Gymkhana car had ever been asked to do.
The build was done with technical partner Vermont SportsCar and took a production-based sedan to the limit of what was possible. The focus was on extreme performance and the raw carbonfibre bodywork received a wildly aggressive and wind tunnel-proven aero package unlike anything seen on a Gymkhana build before.
The Subaru Boxer engine also underwent modifications to Pastrana’s requirements while the suspension was given longer travel and the interior was made Gymkhana-ready.
“This STI is unbelievable!” said Pastrana. “We’ve never had the opportunity to do this before, to build a car with no restrictions. Engine, suspension, aero—everything is unlimited, clean sheet. It’s crazy fast, easy to control and get sideways and it was perfect out of the box in testing. Gymkhana is a new challenge for me but I want to raise the bar, and this is the car to do it!”
Subaru Tecnica International Unleashes Most Powerful Model Ever With Limited-Edition STI S209
Isuzu Malaysia Sdn Bhd recently had an official opening of its very first medium and heavy-duty (MHD) truck dealership in East Malaysia. Located in Kuching, Sarawak, this new MHD truck dealership is operated by Dai Max Automobile Sdn Bhd.
The dealership has 3S status, meaning it offers customers sales, service and spare parts. As its location is near industrial areas, it is readily accessible to many truck drivers whenever they require attention for their vehicles.
“We are very excited with the opening of Isuzu Malaysia’s first MHD truck dealership in Kuching which underscores our commitment to expanding our customer reach in this part of Malaysia, as well as strengthening our aftermarket services and maximising our customers’ satisfaction and trust in us,” said Koji Nakamura, CEO of Isuzu Malaysia, during the official opening ceremony.
“This dealership is designed to deliver exceptional sales and service experience to meet the needs of our customers throughout the region. With a large facility combined with a convenient location, it will definitely enable us to serve our East Malaysian customers better, thus contributing to their business productivity,” added Mr. Nakamura.
The premises of the new dealership cover roughly 3,000 square metres, with the service centre area taking up about 650 square metres. Dai Max Automobile took about 5 years to complete the new dealership which is built according to the latest service centre design. Its facilities allow easy manoeuvring of trucks for service or repair.
In addition, there are three extra bays for light commercial vehicles and light-duty vehicles, plus two extra bays for MHD trucks. The dealership also has ample parking spaces and efficient workshop layout for trucks that are waiting to be inspected.
The team of well-trained and skilled technicians use Isuzu’s latest diagnostic tools for all maintenance work. They always aim to minimise truck downtime so as to increase business efficiency for vehicle owners.
Amenities such as family-friendly customer lounge, prayer room and complimentary snacks and beverages are available for truck drivers to enjoy before they hit the road again once the truck is ready.
“With this new MHD truck dealership, our aim is to focus on potential customers, strengthening our team’s product knowledge and technical skills to support Isuzu Malaysia in achieving growth in this region. Through product innovation, quality service and people, we will be able to create new capabilities to provide the best support for our customers,” Mr. Nakamura promised.
“We will do this by providing competitive pricing for parts and technical services to exceed our customers’ expectations. This will eventually connect to fleet and parts sales, attract new fleet customers and create strong product and brand awareness,” he said.
The new dealership brings the total number of Isuzu MHD dealerships to 11, with 10 strategically located around Peninsular Malaysia.
Isuzu Dura Miles Challenge shows fuel efficiency of 1.9-litre Blue Power engine
© Copyright – Piston.my 2024 Trademarks belong to their respective owners. All rights reserved
