Piston.my

English

Three-cylinder engines in cars are nothing new; Daihatsu popularized the engine configuration in the late 1970s with its Charade and then it was widely used by Perodua. Since the 21st century began 20 years ago, manufacturers have been downsizing engines as one way to reduce fuel consumption. However, unlike those older small engines, today’s downsized engines have a lot of advanced technology to help them develop high outputs and run even more efficiently.

The HR10DET engine in the all-new Nissan Almera Turbo is a good example. It has a displacement of 1 litre but can generate up to 100 ps with 152 Nm. This is comparable to a 1.5-litre engine so the driver enjoys the benefit of a smaller displacement which will consume less fuel – without sacrificing performance, which was the case before.

Nissan HR10DET engine in Nissan Almera Turbo

Some of the features which helps the HR10DET engine, which has 3 cylinders, achieve its high output are 4 valves per cylinder for better breathing efficiency and two overhead camshafts in the cylinder head (DOHC).

Boost from turbocharger
A major contributor to the power output is the use of a turbocharger. Once found only in high-performance engines, the turbocharger is now commonly used for small engines to boost output and response. In the case of the Nissan engine, maximum torque is available between 2,400 and 4,000 rpm, a range that is frequently used in daily driving. With maximum torque available, overtaking can be done quickly and safely.

The turbocharger has an Electronic Wastegate which operates far more efficiently than a conventional mechanical wastegate. A sensor monitors compression levels and enables the wastegate to activate whenever necessary, allowing turbocharging to be maximized. As a result, turbo lag is virtually eliminated for strong acceleration when needed.

Cooling down the air
For a turbocharger to operate at its best, the air flowing through needs to be cool so it can be compressed as much as possible, maximizing the charge. For this reason, an intercooler is installed behind the front grille and effectively cools down the air.

BHPetrol RON95 Euro4M

Technology from GT-R engine
Friction robs an engine of power and engineers work hard to find ways to bring internal friction down. For the HR10DET engine, they drew on the Mirror Bore Coating technology from the legendary Nissan GT-R. Mirror Bore Coating technology can raise energy efficiency by reducing the friction significantly inside the engine.

Rather than inserting a cylinder liner, the technology uses molten iron sprayed onto the surface of the cylinder bore to form a layer of iron coating on the walls inside. This achieves a mirror-like finish that is exceptionally smooth, thereby bringing down friction levels.

Normally, the cylinder liner is 2 mm thick but with Mirror Bore Coating technology, the layer is just 0.2 mm thick, saving weight. The extremely thin layer allows better heat conduction which results in enhanced cooling performance and less engine knocking. The efficiency of the engine as a whole is improved, and fuel economy as well as engine power are enhanced.

D-Step Logic System
The powertrain of the Almera Turbo also includes a next-generation XTRONIC CVT with D-Step Logic System to improve shift feel and responsiveness. The D-Step Logic System is a computer program that uses dynamic inputs such as vehicle speed, accelerator pedal position and application speed to determine ideal gear ratios needed to provide smooth, constant acceleration.

Drivers will feel the shifting being like a conventional automatic transmission with a torque converter (which we can confirm after our short test drive) and with the flexibility and smoothness of a CVT. A Sport mode is available to gain stronger acceleration when required.

“The all-new 1-litre turbo engine is designed to meet our customers’ needs. It provides the highest level of fuel economy – up to 18.4 kms per litre – which can provide up to 650 kms on one full tank. The CO2 emission level has also significantly been reduced by 18% compared to its predecessor. making the All-New Almera Turbo even more environmentally friendly,” said Christopher Tan, Sales & Marketing Director of Edaran Tan Chong Motor.

Selected Nissan showrooms around the country are offering test-drives of the new model so you can experience for yourself the performance of the car. Visit www.almeraturbo.com.my to locate a showroom and by the way, when you take a test-drive, you could also win an Apple iPhone SE worth RM2,199.

Automobili Lamborghini was established in 1963 and the sleek design of its sportscars and their high performance helped to build its reputation very quickly. With Bertone providing the designs, some of which were futuristic, almost any Lamborghini was bound to turn heads as it passed by.

1974 Lamborghini Urraco

Innovative technical solutions
One model which stood out for having introduced innovative technical solutions was the Urraco (Italian for ‘little bull’). Renowned designer Marcello Gandini, the principal designer at Bertone, styled the car which was unveiled 50 years ago this month at the Turin Motor Show.

The Urraco, with its sharp features, was a fast 2+2 coupe, with a mid-mounted V8 rear engine and independent MacPherson strut system on both front and rear – the first time on a production car. Only 4.25 metres long, the Urraco’s interior space was designed with an advanced theme.

Three engine sizes
Initially, it was powered by a 2.5-litre V8 producing 220 bhp at 7,800 rpm and maxim torque of 176 Nm, which took it to a top speed of 245 km/h. An interesting feature of the V8 engine was a single overhead camshaft per bank.

The technical refinement was completed by the use of a Heron chamber cylinder head with flat inner part and the combustion chamber contained in a depression in the top of the piston. This allowed for a higher compression ratio to be achieved without increasing the production costs. Another novelty for Lamborghini was the installation of 4 Weber double-body 40 IDF1 type carburettors.

1974 Lamborghini Urraco

The Urraco with a 2.5-litre engine, produced from 1970 to 1976, was produced in the largest volume – 520 units. A complementary variant was introduced at the 1974 Turin Motor Show which had a smaller displacement of 2 litres (217 bhp/220 Nm). This was mainly to suit the Italian market which had changed tax laws in the early 1970s. This variant was available between 1975 and 1977.

For other markets, Lamborghini was able to offer a bigger 3-litre engine that produced up to 265 bhp/265 Nm. This was sold from 1975 to 1979, and accounted for 24% of all Urracos produced. Lamborghini had hoped to sell up to 1,000 Urracos each year but in the end, only 776 were ever produced in total.

1974 Lamborghini Urraco

More automation in production
The production system for the car was also innovative. From the early stages, it was planned to make more use of the manufacturing capacity at the factory. The Urraco was to be much less artisanal than the other Lamborghini models which it shared little with. With computer-controlled processes, this would also enable higher output and, in keeping with the strategy of Ferruccio Lamborghini, make a Lamborghini more accessible to a wider, albeit still limited, group of customers.

Lamborghini Aventador SVJ 63 Roadster commemorates company’s founding year

With electric vehicles going to take over in coming years, will some segments disappear? Will the rugged 4×4 vehicles and pick-ups slowly fade away? Not likely if we look at what Mercedes-Benz is working on as its electrification program progresses.

The company has revealed a prototype which uses a drivable technology platform on the basis of an EQC 400 4MATIC that is now on sale. Known as the EQC 4×4², this SUV is able to go further on rough terrain using future-oriented technology.

Mercedes-Benz EQC 4x4²

Mercedes-Benz EQC 4x4²

Technology platform
With the EQC 4×4², Mercedes-Benz engineers will test the limits of the vehicle and show that e-mobility is not just urban but also conceivable off-road. The one-off prototype was developed by a cross-departmental team as a technology platform.

“Our aim is to combine modern luxury and sustainability with emotional appeal. The EQC 4×4² shows how enjoyable sustainable mobility can be. This is where electromobility high-tech and an intriguing customer experience are transferred to the mountains, thanks to MBUX and over-the-air updates. To put it succinctly, electric, progressive luxury goes off-road,” said Markus Schafer, member of the Board of Management of Daimler AG and Mercedes-Benz AG responsible for Daimler Group Research and Mercedes-Benz Cars COO.

“This drivable study clearly shows that, alongside a passion for e-mobility, we at Mercedes-Benz lay a strong claim to leadership in this sector and will heighten the emotional appeal of this even further in the future,” he declared.

Mercedes-Benz EQC 4x4²

Mercedes-Benz EQC 4x4²

The capabilities of the EQC 4×4² include driving through sand in desert regions and on beaches, on rocky terrain and through mountain streams. As well as great reliability and corresponding comfort, the mature genes of the standard model also allow trailer operation and installation of a roof-rack. A roof-tent and inflatable dinghy allow the remotest areas to be reached.

Very generous ground clearance
At 293 mm, the EQC 4×4² rides more than twice as high as a production EQC; even a G-Class is 58 mm lower. The fording depth is increased by 15 cm to 40 centimetres and, of course, all necessary measures are taken to protect the many electronic systems and battery pack.

Mercedes-Benz EQC 4x4²

Mercedes-Benz EQC 4x4²

The generous ground clearance is made possible by the conversion to portal axles. Unlike conventional axles, the wheels are not at the height of the axle centre but are instead situated much lower down on the axle hubs owing to the portal gears. Or conversely, the entire vehicle moves up.

The reprogrammed Off-Road drive programs take advantage of the high-performance logic of the current GLC models. For example, using targeted brake interventions, this enables an improved torque curve when starting on loose ground. In combination with the tyres (285/50R20), this results in very good traction.

Mercedes-Benz EQC 4x4²

Mercedes-Benz EQC 4x4²

Mercedes-Benz EQC 4x4²

Soundscape gives feedback to driver
Another highlight of the EQC 4×4² is the sound experience with its own ‘soundscape’. The acoustic production comprises sounds that give the driver feedback on system availability and vehicle parking. It is influenced by various parameters such as the position of the accelerator pedal, speed or energy recovery rate.

The technology uses intelligent sound design algorithms to calculate the sounds coming from the amplifier of the sound system in real time and the interior loudspeakers to reproduce them.

Mercedes-Benz EQC 4x4²

The production EQC uses the external noise generator (Acoustic Vehicle Alert System, AVAS) required by law to reproduce the sounds. The EQC 4×4² has a more powerful AVAS composed specifically for it and uses the headlamps as external speakers for this purpose. The reason for this is that the sound experts at Mercedes-Benz have made creative use of the available installation space in the headlamp housings – thus the ‘lampspeaker’ was born.

Mercedes-Benz EQC 4x4²

The EQC 4×4² is actually the third model of the 4×4² family from Mercedes-Benz. The G 500 4×4² has been around since September 2015, and in 2017, came the E 400 All-Terrain 4×4² study. For now, the EQC 4×4² remains a study, a vehicle for the engineers to test new technologies. However, if response from the public proves to be good and there is a business case, perhaps Mercedes-Benz will turn it into a production model in future.

The new Mercedes-Benz GLB-class

 

Covid-19
Fighting COVID-19 is our joint responsibility. Protect yourself and others: make these 6 simple precautions your new habits.

BHPetrol RON95 Euro4M

McLaren Automotive today unveiled the McLaren Elva Gulf Theme by MSO (McLaren Special Operations), a celebration of the renewed relationship between McLaren and the Gulf Oil brand which existed 60 years ago. It’s another example of how designs from McLaren’s racing history are inspiring the brand’s modern-day customers.

The unique McLaren roadster in blue and orange Gulf colours will makes its world debut at Goodwood SpeedWeek, a ‘closed-door’ live broadcast event bringing together the past, present and future of motoring and motorsport at the Goodwood Motor Circuit in the UK.

New partnership with Gulf
McLaren and Gulf recently confirmed a new partnership that renews a historic union between the two brands that originated in the 1960s, a decade when both companies made their first forays into motorsport. Gulf branding appeared on McLaren’s Can-Am, Formula 1 and Indy cars from 1968 to 1973. Two decades later, McLaren F1 GTRs run by customer team GTC carried the famous Gulf livery in global GT racing, including at Le Mans.

McLaren F1 GTR in 1997

Under the new partnership, McLaren Automotive customers will have the opportunity to commission Gulf-liveried cars directly from MSO. These follow cars inspired by the famous livery designed and produced by MSO prior to the renewed relationship being agreed.

Most recently, a McLaren Senna GTR LM paying homage to the #24 McLaren F1 GTR that finished fourth in the 1995 24 Hours of Le Mans race was completed as one of five MSO-designed customer cars celebrating the McLaren F1’s domination of that race.

2020 McLaren Senna F1 GTR LM Edition
2020 McLaren Senna F1 GTR LM Edition

“The McLaren Elva Gulf Theme by MSO is a striking celebration of both McLaren’s history in sports car racing and our new partnership with Gulf Oil. McLaren Special Operations is committed to pushing the boundaries of the ‘art of the possible’ and projects like this showcase the increasingly extensive range of personalisation options we can offer customers – in this case, enhancing the authenticity of the livery by incorporating Gulf brand logos into the design,” said Ansar Ali, Managing Director of MSO.

McLaren Ultimate Series
The Elva, which follows the McLaren P1TM, McLaren Senna and Speedtail in McLaren’s Ultimate Series, links McLaren’s heritage to its present and future with a name and style that recalls the McLaren-Elva sports racers of the 1960s. These were among the first sportscars designed and raced by Bruce McLaren and the company he founded, and the new Elva evokes the true spirit of driving enjoyment symbolised by this era.

In line with McLaren’s on-going commitment to super-lightweight engineering, the new Ultimate Series roadster retains the lightweight construction philosophy of its forebear and is at the cutting-edge of automotive technology.

The body design of the screenless, roofless Elva, for example, incorporates an innovative Active Air Management System that creates a virtual canopy over the seamlessly-integrated cockpit. It is powered by an 815 PS/800 Nm 4-litre, twin-turbocharged V8 engine.

Only 149 units
With deliveries of the Elva commencing this year, MSO has already completed the specification of the first cars and is well-advanced in discussions with customers to create further dramatic paintwork and liveries. Just 149 examples of the Ultimate Series roadster will be available to customer order, making it one of the rarest McLarens ever produced.

New 765LT continues the McLaren ‘Longtail’ story

COVID-19

Social distance

Having been among the early carmakers to start electrifying their product line and since 2010, it has sold more than 300,000 electric vehicles in Europe. Renault continues to look ahead to the future of electric vehicles and mobility.

Revealing the next step in the brand’s broadening electrified vision is the Megane eVision, an innovative concept car based on the new modular CMF-EV (Common Module Family – Electric Vehicle) platform. The production version of the  Megane eVision, to go on sale in 2020, will be the first Renault vehicle to make use of the new  platform.

Highly variable platform
This new platform was specifically designed by the Alliance and has been rigorously tested over 3 million kilometres in France and Japan. It can accommodate a variety of vehicle bodies – from low saloons to larger SUVs – with different modular batteries can be fitted vertically and horizontally.

What will be consistent across all vehicles sitting on the CMF-EV platform is a flat floor, boosting interior practicality and modularity thanks to the lack of an exhaust system or standard transmission, making room for a more versatile cabin.

It is also modular in length with a wheelbase up to 2.77 metres available, offering engineers a vast scope for vehicles with more powerful batteries and longer driving range. The flexibility of the platform is further demonstrated by the ability to accommodate a second rear engine to provide 4-wheel drive capability.

The engine compartment is also more compact when compared with traditional combustion-engined vehicles, enabling an extended wheelbase with wheels pushed further to the edges of the vehicle. This allows a much roomier cabin environment as well as more design opportunities.

Powertrain and battery
The electric motor is one of the most powerful in the Renault range of any fuel type, delivering 160 kW of power (equivalent to 217 bhp) and 300 Nm of torque, to give a claimed acceleration time from 0 – 100 km/h in under 8 seconds.

Slimline battery packs located beneath the floor of the vehicle give a low centre of gravity. An innovative feature is that they are structural and form an integral part of the car, helping to absorb energy in the event of a side collision. They also have a higher energy density, enabling longer driving range and reduced charging times.

The 60 kWh battery pack thickness can be altered in order to best suit the car, meaning particular models can be designed to be perfectly fit for purpose. For example, a compact vehicle can be truly compact, while remaining highly efficient with increased driving range and improved energy efficiency.

Besides an advanced system for managing battery temperature and one of the thinnest batteries on the market, the Megane eVision also has a new ultra-compact powertrain. An optimised water-cooling Energy Recovery System captures the heat of the engine and battery to heat the passenger compartment without using energy from the battery. This ensures the driving range is not impacted by cold weather, maximising all available energy.

LIVINGTECH technological ecosystem
The interior showcases Renault’s LIVINGTECH technological ecosystem, an intuitive and smart interior environment that focuses on interacting with the passengers and catering to their needs and usage. The space within is comparable to a much larger vehicle in spite of the compact hatchback exterior. A slim and sleek LIVINGSCREEN instrument panel forms part of the interior design that combines design and practicality, with striking touches such as illuminated edges.

The 4.21-metre long Megane eVision has a hatchback design which is a modern interpretation and reinvention of the Megane name. It takes inspiration and details from the MORPHOZ concept car with the large wheels, body height and robust design reminiscent of an SUV.

The floating roof is finished in a unique gold colour gradient that starts from the front windscreen pillar, giving an impression of lightness, accentuating the car’s sleek profile. The highly sculpted bonnet features two air inlets, enhancing the illuminated Renault logo, while the 20-inch alloy wheels are finished in the shape of propeller blades.

Renault MORPHOZ – the car that changes shape according to needs! (w/VIDEO)

For those who are planning to buy the new Nissan Almera Turbo, Edaran Tan Chong Motor (ETCM), has announced the availability and pricing of Optional Accessory Packages that consist of items customised for the new model.

There are 3 packages, priced from RM400 to RM2,750, and all the items come with a 3-year/100,000 km warranty. Even better, the cost of the package can be included in the H-P loan taken, so you pay for it in instalments as well.

The packages are shown below and include Protection Packages as well:

Combination leather upholstery with dark grey accents can be specified when ordering the new Almera Turbo.

Items can also be purchased separately
For those who prefer to buy just some of the items and not take a whole package, ETCM will also sell them separately although there are savings of up to 31% if you take them as a package. The individual items available are shown in the chart below:

The new Almera Turbo, with a small but advanced HR10DET turbocharged engine, is very different from the model it replaces. ETCM believes it can ‘Challenge All Beliefs’ with innovative technologies and features that will be appreciated by today’s buyers.

If you test-drive the new model (at selected Nissan showrooms), you could win one of 15 iPhone SE (128GB) smartphones worth RM2,199 each. To find out which showrooms have an Almera Turbo for viewing and test-drive visit www.almeraturbo.com.my.

First Look at the all-new Nissan Almera Turbo (N18), with brief driving impressions

With the rising number of COVID-19 cases and now the imposition of CMCO in the Klang Valley for 2 weeks, companies and event organisers are reviewing their activities in the next few months. One of them is Art of Speed Malaysia (AOS) which had an event planned for November 12, 2020 at the 1 Utama Shopping Centre in Petaling Jaya, Selangor.

With the CMCO in operation, the organisers have decided to postpone the 9th Annual Art of Speed Malaysia event to run from December 30 until January 3, 2021. The venue will remain at the 1Utama Shopping Centre as the AOS people are satisfied that ‘the shopping centre’s proactive actions and readiness to host the event have been exemplary’.

The date for the Hot Wheels Legends Tour Malaysia Virtual Finals will remain unchanged on November 12, 2020 as it is essentially an online event. The jury will consist of judges from Malaysia and the USA and judging will be done LIVE online, with the winner being announced  on the same day.

“Throughout this pandemic, we have been working behind the scenes with various parties to ensure our decisions are for the best interest of all involved especially with regards to health and safety. We can only pray that this new wave will soon subside, and we can continue with our plans to support the various communities and industries that contribute so much to the socio economic fabric of Malaysia,” the organisers said.

Malaysia is first stop in Asia for 2020 Hot Wheels Legends Tour

BHPetrol RON95 Euro4M

Proton reports that one of its employees was tested positive for COVID-19 on October 14, 2020. The employee, who is from the Research & Development Department in Shah Alam, was immediately put under the care of a government facility.

The company, which has been strictly adhering to the protocols issued by the authorities, immediately put into place its mitigation plans to ensure prevention of further spread. Contact tracing was initiated begun and all employees from the respective departments have been asked to stay away from the office and self-quarantine. This is being followed by deep cleansing and a disinfection of the premises and any suspected areas.

Proton states that the employee concerned was not in any way regularly interacting with customers and therefore there is a lower concern about direct exposure to the public.

The company reassures all its customers that it will continue to strictly follow all guidelines and procedures laid out by the authorities as it has been doing from the start of the pandemic. It will continue to monitor the situation closely before deciding on any further course of action, if necessary.

The safety of all Proton staff, customers and Malaysians is of the utmost importance to the company and will be its main priority, it said in a statement issued this afternoon.

COVID-19 Facemask

With a Conditional Movement Control Order (CMCO) now in force in Klang, Kuala Lumpur, Putrajaya, Selangor and Sabah, Mercedes-Benz Malaysia and Mercedes-Benz Services Malaysia informs the public of the following measures with Mercedes-Benz Star Shield from October 14 to  October 27, 2020.

The Star Shield Programme
The Mercedes-Benz Star Shield programme is a safety protocol for Mercedes-Benz dealers and customers. It consists of a comprehensive safety plan that includes social distancing, provision of masks and hand sanitizers, cleaning and sanitization of showroom cars and common areas, temperature checks and limit on customers present.

During this CMCO period, all authorized Mercedes-Benz dealerships nationwide will remain open for business as usual. They will, however, strictly adhere to the guidelines set by the government for the protection of customers as well as their own employees.

Customers can still request for test-drives, while owners can bring their vehicles in for routine service and maintenance and/or repairs at service centres. The Standard Operating Procedures (SOPs) that have been observed for some months continue to apply.

24-hour support service
Customers can still obtain 24-Hour Roadside Assistance for emergency breakdowns and technical issues. They can call 1-800-88-1133 at any time of the day for support.

In order to minimize social contact, the Mercedes-Benz Star Shield also includes initiatives such as the Drop & Go, Door-to-door and Express Service.

Click here for other news and articles about Mercedes-Benz.

Archive

Follow us on Facebook

Follow us on YouTube