According to the Transport Minister, there are over 4.2 million registered vehicles which have not had their roadtax renewed. Many of these would have the roadtax expired for more than a year, which means that if they wish to use the vehicle on public roads again, it will have to be sent to Puspakom for a roadworthiness inspection first.
Now, that requirement has been abolished for vehicles registered for private use by individuals. No Puspakom inspection will be required for vehicles which have not had their roadtax renewed for up to three years.
A car undergoing inspection at PUSPAKOM
Announcing this, the Transport Minister said that the change is in response to requests from vehicle owners. Particularly at this time when the COVID-19 pandemic has affected many financially, removing the vehicle inspection requirement can help to save some money. Perhaps some of those affected have old cars in the house and now want to use them again as they do not want to avoid public transport.
However, the exemption from inspections does not apply to commercial vehicles which, in any case, are subject to periodic mandatory inspections to ensure they are in a safe condition for use.
Discount period extended to end September
Meanwhile, the discount of up to 70% offered for summonses has been extended. It was originally up to the end of August but will not still be available until September 30,2020. The discount given applies to all compoundable summonses issued by the JPJ and the Land Public Transport Commission (SPAD) but not those issued by the police.
Again, the move is aimed at helping those who are in a difficult situation at this time and need to have a licence to work in jobs like e-hailing or food delivery. In some cases, not settling a summons would mean they are blacklisted and cannot renew their licence. Nevertheless, they still have to pay for the offence if they committed it.
Toyota and Honda may be rivals in the marketplace, battling for sales and market share. However, when it comes to Corporate Social Responsibility (CSR), it’s a different matter and where appropriate, they can work together for the good of communities.
During the magnitude 9 earthquake followed by a tsunami in northeastern Japan in 2011, it was found that power outages were a serious matter that affected rescue operations. That’s to be expected when the power supply network is damaged and repairs take a while. To address this issue, Toyota and Honda will bring technologies together to create a mobile power generation/output system.
Mobile power stations
For some time, carmakers have to considered drawing electricity from the big battery packs in their hybrid and electric vehicles, both of which are made by Toyota and Honda. These would become mobile power stations which could supply electricity for emergency use when necessary.
Now Toyota and Honda have jointly developed a system for a mobile and safe power supply. The system incorporates the ‘Moving e’, a fuel-cell bus developed by Toyota using the FC Bus as a basis. In the first step, the versatile application possibilities of the system will be demonstrated in tests starting this month.
CHARGING STATION
The Moving e mobile power generation/output system will consist of Toyota’s CHARGING STATION fuel cell bus with Honda’s Power Exporter 9000 portable external power output device. The CHARGING STATION loaded with all equipment will be driven to the place and the Moving e will supply electricity in actual locations.
More specifically, portable external power output devices and portable batteries will be used to take electricity out of the fuel cell bus, which serves as a power source, and feed electricity to electrical appliances. The CHARGING STATION features a high-output and large-capacity power generation capacity (generates 454 kWh with maximum output of 18 kW).
The Moving e can also be used for routine applications such as large events. As a mobile charging station, the bus drives directly to the place of use. However, it is limited to a radius of about 100 kms from a hydrogen filling station.
Rest area
Furthermore, featuring a space where people can take a nap, the CHARGING STATION can serve not only as a means of transportation but also as a place for people to rest in times of a disaster.
External power delivery devices and portable batteries can be charged with the energy from the fuel-cell via the charging station integrated on the back of the bus. In this way, the selective energy supply can be ensured after the breakdown of a power grid.
Nissan has been taking a beating in recent times, with its CEO being charged with financial wrongdoing and massive losses worsened by the COVID-19 pandemic. It’s getting to be like the 1990s when a steady decline in its business saw a debt of US$20 billion by 1999 putting it on the brink of bankruptcy.
The new management team is struggling to slash expenses worldwide, cutting at least 12,500 jobs globally by March 2023 and closing some factories. It’s almost like the early years of the Ghosn era when his ‘Nissan Revival Plan’ called for 5 factories to close with a termination of up to 21,000 jobs and 50% reduction in suppliers. Though criticised for his extreme measures, Ghosn turned Nissan around completely by March 2001 with a net profit of 331.1 billion yen.
Product development was naturally hampered by limited budgets; reduced sales could not generate enough revenue to effectively fund development of the next generations. But Ghosn kept morale high with the revival of the GT-R and also authorised continuation of the legendary Z sportscar, the former still a significant model 13 years after its launch.
Now, Nissan is doing the same thing with what looks like a new Z, and the prototype will be revealed to the world on September 15, 2020 at 7:30 pm in America (8:30 am on September 16 in Malaysia). The prototype could be the final form for the new sportscar which is rumoured to be designated ‘400Z’.
Typically, Japanese manufacturers show off a ‘prototype’ which is pretty much production-ready and then launch the new model within the next 12 months. If it was not something about to go into production, they would more likely call it a ‘concept car’.
Actually, Nissan already hinted at a new Z in May and a teaser video showed the silhouette of a sportscar (above). It had the characteristic long nose and as for what will be under the bonnet, probably a V6 from the current engine family that has won awards for years and years.
Remember the date: September 16 at 8:30 am in Malaysia.
We recently wrote about the Volvo P1800, an iconic sports model from the 1960s which also came to be known as ‘The Saint’s Car’. Now Cyan Racing, the reigning triple World Touring Car Champions, has revealed an interpretation of that car – the Volvo P1800 Cyan.
The original P1800 was unveiled in 1960, a year before the Jaguar E-Type, two years before the Ferrari 250 GTO and three years before the Porsche 911. “The Jaguar, the Ferrari and the Porsche are all cars with a continuation,” said Christian Dahl, CEO and founder of Cyan Racing. “That left us with inspiration to create what could have been if we, as a race team, had been there during the Sixties, racing the P1800, and got to design a road version of our race car.”
What could have been
In the age of autonomous driving, electrification and connectivity, Cyan Racing decided it was time to capture what has been and to make it timeless. “Obviously we could have built an electric Volvo P1800 filled with all the latest technology, comfort and luxury. But that was not what we wanted,” Dahl said. “Amid this paradigm shift, we decided to slow down time and freeze a part of it in our own time capsule. To take the best from the Golden Sixties and combine it with our capabilities of today, keeping a pure yet refined driving experience.”
Tailored to deliver genuine driving pleasure
While creating the P1800 Cyan, the team behind it decided to treat the design and engineering of the sixties with care, moving it forward in a delicate way. They applied their expertise in engine, aero and chassis design to make a car that delivers on the Cyan engineering philosophy in terms of predictability and intuitive driver control.
But it would also be lightweight and offer the analogue driving experience of the Sixties. “There are no driver aids to distort the driving experience, meaning no stability control, ABS or brake booster,” said Mattias Evensson, Project Manager and Head of Engineering at Cyan Racing.
“The Volvo P1800 Cyan is about clearing away anything disturbing the direct connection between driver, tyres and the road. Our objective has been to keep that undisturbed sensation whilst refining it with the best technology of today,” explained Evensson.
Carbonfibre and steel body
The bodywork has been altered to accommodate a wider track, larger wheels and repositioned greenhouse, among a long list of redesigns. “To put together an interpretation of an iconic design is a challenge. I think we succeeded in merging new technology without losing the character of the original Volvo P1800,” said Ola Granlund, Head of Design at Cyan Racing.
The P1800 Cyan which started life as one of the units produced in 1964 has been refined and reinforced utilizing high-strength steel and carbonfibre. “The basis for a precise and intuitive driving experience is a solid body structure. Cars from the Sixties are far from ideal when it comes to this due to weak points and steel quality that allow for flex,” said Evensson.
“We have redesigned the structure of the original shape and strengthened weak points in the chassis through triangulation, using high-strength steel and integrated the carbonfibre body with the chassis structure. The carbonfibre is not just a fine shell of separate panels, but rather structural components joined with high-strength adhesive to the steel. All parts of the carbonfibre are adding to the structural rigidity,” he said, adding that the car weighs just 990 kgs (lighter than a Perodua Myvi 1.5).
Powertrain from racing car
The 2-litre turbocharged 4-cylinder engine is based on the same engine as used in the world title-winning Volvo S60 TC1 race car, producing 420 bhp/455 Nm, with a redline at 7700 rpm. Although the engine is turbocharged, it is developed to deliver a linear power and torque curve with the characteristics of a normally aspirated engine. The engine character is designed to deliver a driving experience as in the Sixties but with increased performance and precision.
“While evaluating engines for the Volvo P1800 Cyan, we considered a wide range of Volvo engines, including the original B18, the ‘Red Block’ B230, the 5-cylinder ‘White Block’, the short inline 6-cylinder and the 4-cylinder VEA engine that power Volvos of today,” said Evensson.
“The efficient and lightweight VEA (Volvo Engine Architecture) gave us the best base, also allowing us to transfer our experience from the different versions of the VEA that we have designed for our race and performance cars of the past decade,” he said.
“We have adapted it to suit the Volvo P1800 Cyan with the power output increasing through the entire powerband. The power peaks late. It is designed for high revs a lot, with the torque intuitively linear to the pedal. We have learnt from racing where the drivers want perfect control of the torque, increasing precision and driving pleasure at the same time,” Evensson added.
A 5-speed bespoke Holinger gearbox has been selected to carry the mechanical feeling of the original Volvo P1800, but with greater gear change precision and capability of handling the increased torque. The live rear axle of the original car is replaced with a Cyan-designed independent rear suspension.
A key part to the engaging rear-wheel drive experience is the torque-biasing limited slip differential. The differential is mounted in a Holinger housing with unique gears in order to combine capable performance on a circuit with civilized behaviour for road use.
Pure driver focussed chassis
The fully adjustable front and rear suspension features bespoke lightweight components, including aluminium uprights, double wishbones and two-way adjustable dampers with Cyan hydraulics.
“The settings of the car are not aimed at fast lap times but rather to deliver an enjoyable and exciting driving experience. I feel my smile widening each time that I control the drift angle of the car through a long turn. The car goes where you point it. You can be brutal going into a corner and still find your apex and exit within millimetres,” said Thed Bjork, development driver and 2017 touring car world champion for Cyan Racing.
The carbonfibre-reinforced chassis is connected to the road with 18-inch forged rims with Pirelli P Zero 235/40 tyres at the front and 265/35 at the rear. Each wheel has 4-piston calipers with 362×32 mm steel discs with a ‘genuine feeling’ as no brake booster or ABS is there to interfere.
“The Volvo P1800 Cyan is the result of an advanced engineering process, involving many of the same talents who designed, built and developed our world title winning Volvo S60 TC1 Cyan,” said Dahl, adding that pricing and individual specification is available for those who want one.
Hyundai’s Tucson will start its fourth generation when its world premiere takes place on September 15, 2020. Before then, the company is showing the first official images of its all-new SUV. For this new generation, the Korean carmaker has made major changes to the styling and it will be the first C-segment SUV to be available in two different wheelbases to suit different markets.
Overall, the new Tucson’s body is bigger and wider than before, with a long bonnet and short overhangs on a stretched wheelbase that give it a coupe-like profile. The angular body panels offer yet another interpretation of the parametric design language that Hyundai is now using.
The exterior styling expresses what Hyundai designers call ‘Parametric Dynamics’ with kinetic jewel-like surface details that will have people doing a double take. Chiseled surfaces create a striking contrast between sleek silhouette and masculine wedge, suggesting forward motion even when standing still. The taut athletic shapes merge into angular wheel arches in the typical manners of SUVs.
Parametric Hidden Lights
New design highlights include the latest evolution of Hyundai’s signature headlamp architecture called ‘Parametric Hidden Lights’ and a dual cockpit layout that offers personalized space with a high-tech user experience. The signature daytime running lights (DRLs) are integrated into the jewel-like grille, only revealed when turned on.
‘INTERSPACE’ with an integrated interface
The evolution of the Tucson’s interior layout has led to a lower instrument display and removal of the gauge cluster housing for a decluttered surface. The broad ridge of the dashboard blends seamlessly with the doors, wrapping around front occupants like a deep gorge.
The vertically oriented, fully integrated centre fascia descends to the console like a mighty waterfall. Twin silver garnish lines streaming from the centre fascia to the rear doors harmonize neatly layered premium surface materials in complementary neutral tones.
“The mission of ‘Sensuous Sportiness’ is to elevate the emotional qualities of automotive design. We want our customers to feel moved. With the all-new Tucson, we are introducing its ultimate evolution and a definitive statement about Hyundai’s unstoppable forward momentum,” said SangYup Lee, Senior Vice-President and Head of Hyundai Global Design Centre.
When automotive historians look back on 2020, it will be regarded as a dark period for the industry. Factories had to shut down for long periods, along with showrooms, and sales came to a standstill for a couple of months. It was an unprecedented situation; even during the worst recessions, business still continued.
However, it appears that the industry is recovering steadily and where the Malaysian market is concerned, the Total Industry Volume of new vehicles sold exceeded 50,000 units for the second month in a row. That’s partly due to the government exempting sales tax, which lowers the retail price, but there would also have been people who had to defer their purchases in March and April.
Market share estimated at 21.7%
For Proton, things have been going well with yet another great month – its second best – in August. During the month, 11,378 units were sold, an improvement of 24.7% over the same month in 2019. With this volume, the brand’s market share for the month is forecast at 21.6% while its year-to-date market share is estimated to be 21.7%.
With 61,672 sales so far in 2020, Proton‘s cumulative sales volume after 8 months is 46 units ahead of the same period from the previous year. The achievement is particularly noteworthy as sales in March, April and May were affected by the Movement Control Order (MCO).
The company also states that three of its models were sales leaders in their respective segments although we wonder how they determine that when the official data for individual model sales of other brands is not released. In any case, the powerful Competition Commission makes it an offence to share such information. This was declared some years back with the Competition Commissioner saying that if such data is shared by the industry, ‘the prices of spare parts will go up’. As a result, the Malaysian Automotive Association stopped releasing model sales data and the data can only be made public 12 months later.
“Proton is pleasantly surprised by how quickly we have been able to recover the lost sales during the MCO period, as it only took us three months to get back on track. By exceeding our YTD volume in August 2019, we are quietly confident of recovery from the headwinds of COVID-19. The positive effect this has on the company, our employees and the vendor community cannot be understated and we hope to continue this trend until the end of the year so as to give the automotive industry ecosystem a strong boost,” said Roslan Abdullah, CEO of Proton Edar.
After months of shutdown and cancellation of many activities, it seems that the auto industry is now making up for lost time with a vengeance. New models are being launched almost every month but in a new way: online. The traditional launch crowded with guests and media is no longer appropriate in the current pandemic situation where social distancing is necessary. So the car companies are instead using the internet to present their new models and it goes out to a global audience.
Actually, broadcasting a global debut online is not new and has been done for a number of years now, except that it is now more focused online. Money saved on renting spectacular venues and lavish events can now be used to produce even better presentations, and the technology today makes smooth and reliable streaming of events live possible.
France, UK and tonight, Germany
Yesterday, Peugeot revealed its updated 3008 and some hours later, Rolls-Royce presented its all-new Ghost. Today, it’s the Germans’ turn and Mercedes-Benz unveiled its flagship S-Class model with key board members personally introducing various aspects of the product.
As in the launch of the now-superseded W222 generation in May 2013, Alicia Keys, the singer-songwriter, also participated in the event along with 6-time F1 champion, Lewis Hamilton who drives for the Mercedes-AMG PETRONAS Racing Team.
Alicia Keys provided a virtual tour of the new S-Class.
A pioneer again
Highlights of the all-new S-Class – designated ‘W223’ – have been publicized in the last few months and as the ‘snippets’ suggested, this new generation is once again a pioneer with numerous innovations in the areas of driver assistance, protection and interaction. It is, of course, also a benchmark in the luxury segment, as its predecessors have been for decades.
‘Focus on people’ is how Mercedes-Benz describes its product development for the next generation of individual mobility. Extensive digitization is now used to provide convenience, comfort and connectivity for every occupant, besides enhancing operating efficiency. Even the well-being of its occupants is looked after, with an effective air filtering system referred to as ENERGIZING Air Control.
MBUX becomes smarter
Cars are becoming more ‘intelligent’ and in the new S-Class, this is exemplified best by the latest MBUX (Mercedes-Benz User Experience). Debuting in its second generation with the new S-Class, this ‘learn-capable’ system is even more digital and intelligent. Both the hardware and software have made great strides with displays on up to 5 large screens, in part with OLED technology.
There’s a new 3D driver display which allows a spatial view at the touch of a button for the first time. It gives a real 3-dimensional effect without having to wear 3D glasses. There are also two different head-up displays (HUDs), one with augmented reality (AR) content and the other is a more conventional type.
MBUX now has services for each individual passenger, making the possibilities for personalization far more extensive. The voice assistant, which responds to ‘Hey Mercedes’, is even more learn and dialogue-capable by activation of online services in the Mercedes me App. Moreover, certain actions can be performed even without the activation keyword.
Using cameras in the overhead control panel and learning algorithms, MBUX Interior Assist recognizes and anticipates the wishes and intentions of the occupants. It does this by interpreting head direction, hand movements and body language, and responds with corresponding vehicle functions.
With the MBUX Smart Home function, the S-Class now also becomes a control centre for the home. The driver or passengers can monitor and control things like room temperature and lighting, roller blinds and compatible appliances. Of course, there must also be smart and connected devices at home as well.
Dimensional concept and interior design
The S-Class is a big car, as befits its status and the W223 S-Class has increased in size compared to its predecessor. It has extra length and width, with the wheelbase extended as well (there is a long-wheelbase variant too). Apart from expanding rear legroom, it also makes for generous boot volume.
The interior design has associations with interior architecture and yacht design elements. The sculptured look of the dashboard, centre console and armrests appears to float above an expansive interior landscape. Systematic reduction in the number of controls gives a minimalist appearance of the interior. A fine divide between the upper section of the dashboard and the large trim element structures the area and creates horizontal breadth.
Alongside up to five screens, there are large areas of trim in the dashboard and in the rear. One particularly attractive version of the trim is an open-pored wood veneer shot through with inlays of real aluminium that follow the contours.
New design elements include the flat, four-square centre vents with horizontal nacelles. Two slim, vertical side vents on each side round off the ends of the dashboard. The driver display and media display can be personalized in up to four display styles (Discreet, Sporty, Exclusive, Classic) and three modes (Navigation, Assistance, Service).
There are no less than 19 motors inside the front seats, which makes them quite complex structures. Therefore no one should complain that he or she cannot get a comfortable position. The flowing, three-dimensional layer design theme gives an impression of lightness and different finishes give the seats different characters. Five different rear seat variants make it possible to configure the rear of the S-Class as a working or rest area.
In earlier years, seats were carefully shaped and cushioned with advice from ergonomic specialists to reduce fatigue on long journeys. Today, cars like the S-Class have seats that massage your body so you reach your destination fresh and alert. There are 10 different massage programmes available using vibration motors. The relaxing massage is enhanced with warmth based on the hot-stone principle.
Even more support for the driver
The new S-Class arrives in the market ready for a high degree of autonomous operation. Specifically, it will be able to operate in Level 3 mode which means it can drive itself from point A to designated point b without human control – but the human must be ready to take over when necessary. Mercedes-Benz says this capability will be available in Germany from the second half of 2021 with the new DRIVE PILOT. Availability elsewhere would depend on infrastructure and regulations permitting autonomous operation.
Each S-Class generation has introduced new safety technologies and the W223 continues the tradition with numerous new or extended driving assistance systems. The operating principle of the systems is made visible by a new display concept in the driver display.
Innovations in restraint systems also confirm the leading role of the S-Class when it comes to passive safety. A significant new safety feature is the optional rear airbag system. During severe frontal collisions, the rear airbag can considerably reduce the loads acting on the heads and necks of seatbelt-wearing occupants on the outer rear seats.
During a severe side impact, depending on the direction of impact, impact severity and front seat occupancy, the new centre airbag positions itself between the driver and front passenger seat, reducing the risk of their heads making contact. It is integrated into the driver’s seatback in the middle of the vehicle.
The parking systems are also more sophisticated and the driver can park and recall the car via a smartphone with remote parking assist. With the INTELLIGENT PARK PILOT, the S-Class can provide Automated Valet Parking and if the required services are available, it can even enter and leave multi-storey car parks in highly automated mode – without a driver. In other words, the car can come to you on its own.
More maneuverable and dynamic
The new S-Class has rear-axle steering (optional) with a steering angle of up to 10° that improves maneuverability in urban areas to the level of a compact car, with the turning circle reduced by up to 2 metres.
The optional, fully active E-ACTIVE BODY CONTROL suspension on a 48V basis offers a unique synthesis of comfort and agility, plus additional protection in the event of a lateral collision. The AIRMATIC air suspension with continuously adjustable damping ADS+ is standard equipment.
Mercedes-Benz has now added a new function of PRE-SAFE Impulse Side to its measures in the pre-accident phase. When a side impact threatens, the vehicle body can rise by up to 80 mm by the E-ACTIVE BODY CONTROL suspension within a few tenths of a second. This reduces the loads on the door structures, as the door sill can absorb more of the energy thanks to its higher position. As a result, deformation of the passenger cell and the loads acting on the occupants can be reduced. Radar sensors are used to recognize a potential side crash.
The optional DIGITAL LIGHT system is introduced for the first time in a Mercedes-Benz. It is am exceptionally intelligent system which can warning of recognized roadworks by projecting an excavator symbol onto the road surface, aiming a spotlight at pedestrians detected at the roadside as a warning, and projecting guidelines onto the road surface in narrow lanes.
In each headlamp, DIGITAL LIGHT has a light module with three extremely powerful LEDs with light that is refracted and directed by 1.3 million micro-mirrors. The resolution is therefore more than 2.6 million pixels per vehicle, enabling highly precise light distribution.
More electrification, more efficiency
Although its electrification program is well underway, Mercedes-Benz will still offer petrol and diesel engines with the new S-Class. These are 6-cylinder units with various outputs and there will also be a V8 engine with an integrated starter-generator (ISG) and 48V onboard electrical system. A plug-in hybrid with an all-electric range of around 100 kms will follow in 2021.
Ola Kallenius, Chairman of Daimler AG and Mercedes-Benz AG, also mentioned the EQ S, an all-electric S-Class to come in due course, but gave no details about it. It’s not something new, though, as the company displayed the Vision EQS concept which was described as a ‘future S-Class-like sedan’ with an all-electric powertrain and a projected range of 700 kms.
New factory for the new generation
Production of the new S-Class is now underway at the new Factory 56 in Sindelfingen, Germany. Like the S-Class which has been considered (by Mercedes-Benz) as the future of the automobile, the new facility also represents the future of automobile production at Mercedes-Benz. Advanced manufacturing technologies and processes enable it to have maximum flexibility to produce vehicles of different designs and drive systems, from conventional to all-electric drive.
Deliveries to customers in Germany will begin during the last quarter of this year and the new model will be progressively launched in other global markets from the start of 2021. Mercedes-Benz Malaysia would now be planning for the introduction of the new generation on the assembly line at its plant in Pekan, Pahang, and we should also see in sometime in 2021.
Although insurance coverage for your motor vehicle is compulsory if you want to use it on public roads, the business is competitive and insurance companies offer all sorts of extra benefits if you buy a policy from them. However, one of the best for motorists would be the insurance coverage offered by the car company that sold them their new vehicle. Not all companies do this and it is not their line of business, but they work with their panel of insurance companies to offer their customers the best possible package.
The Honda Insurance Plus (HiP) plan is an example. Introduced in 2002, it is exclusively for Honda owners and provides comprehensive protection and coverage. Working with its panel of 8 insurance companies, Honda Malaysia recently enhanced the HiP package to offer Rescue, Protection and Savings.
“As a car owner myself, I understand the importance of having the peace of mind knowing that my passengers and I are well-protected throughout the ownership of the car,” said Honda Malaysia’s Managing Director & CEO, Toichi Ishiyama. “The all-inclusive and wide-ranging HiP is the best insurance plan for Honda owners because it is developed by Honda, for Honda customers and with our Honda cars in mind.”
“At Honda Malaysia, we are dedicated to offering competitive and comprehensive protection packages for our customers and this HiP plan has been designed to be one of the best in the industry. We believe that this exclusive insurance plan will be able to provide the assurance to Honda owners that they and their cars are well taken care of and they are able to fully experience the ‘Joy of Owning’ and ‘Joy of Driving’ a Honda car,” Mr. Ishiyama explained.
Rescue
The first benefit – Rescue – has a rescue team on call 24 hours a day, 7 days a week. Benefits include 24/7 towing assistance in case of accidents, breakdowns and floods, and the vehicle will be sent to any Honda authorised Body & Paint Centre within a 450 kms round trip from the location. Roadside repair service offers free labour of up to RM200 per event, excluding the cost of spare parts (if needed).
Apart from that, the 24/7 roadside repair services are also available for unexpected situations such as a flat tyre, replacing a flat battery or even running out of fuel. HiP policyholders can also be assured of efficient assistance for hassle-free claims when they are necessary to be made.
Protection
Through the Protection benefit, HiP policyholders are promised high quality workmanship on all body and paint repairs at all Honda Authorised Body & Paint Centres. Only Honda genuine body and parts replacements are used and these come with a 6-month warranty (or maximum of 10,000 kms).
The good thing about having HiP is that if a vehicle is sent to an authorised Honda Body & Paint Centre for repairs, pre-approval of the claim can be faster if it is estimated to be below RM20,000.
All authorised Honda service centres and Body & Paint Centres handle repair work under the Honda Insurance Plan.
Besides that, HiP policyholders will be given medical assistance such as medical referral and arrangement of appointments, dispatch of medications which are not available locally, and medical evacuation or repatriation, if required. As an additional new protection benefit, each HiP policyholder will now get Personal Accident Coverage of up to RM15,000 in the event of Accidental Death or Permanent Disability in the Named Vehicle accident.
Savings
Honda Malaysia has made sure that those who take HiP will enjoy savings and the best value for their premium paid. The extended coverage terms and better savings from replacement costs will help to ease financial burdens.
The existing HiP 100% insurance payout based on the agreed value if car is stolen or severely damaged in an accident for the vehicle age of up to 10 years (since original registration) is now upgraded to 13 years. Other newly introduced privileges include Unnamed Driver whereby HiP provides coverage for all drivers under private registration with no additional names and compulsory excess payment required; flood allowance of up to RM1,500; special relief allowance of RM1,500 in the event of car theft or total loss; and RM1,000 for lost key reimbursement.
Genuine Honda parts are used for repair work and when new parts replace old ones, there is no betterment charge (terms and conditions apply).
Apart from that, there’s 100% coverage for 10 years with no betterment fee imposed when old parts damaged due to accident are being replaced with new original parts.
HiP is available to all existing and new Honda owners who can start their first policy from the time they purchase a new vehicle or when they need to renew their insurance. More information is available at www.honda.com.my.
Ghost is the sort of name companies would avoid using since a ghost is not what people like to encounter. Yet Rolls-Royce has been able to use it as the name for one of its cars and not only that – it also has names like Phantom and Wraith for other models! Obviously, those who own these cars have no issues with such names or Rolls-Royce would have heard long ago since the first Silver Ghost was sold in the early 1900s.
It is said that the reason for using ‘Ghost’ in the name was in reference to the car being as quiet as a ghost (and perhaps moving as fluidly as well). The silver was probably inspired by the fact that the car was finished in aluminium paint.
The Silver Ghost was produced between 1906 and 1926 and the model line did not continue after that. Then, in 2009, the modern Ghost was announced, with deliveries starting at the end of that year. It was an entirely new model, placed below the Phantom by size and by price but nonetheless a true Rolls-Royce as well.
That first Ghost appealed to a whole new generation of customers, both in age and attitude. These men and women asked Rolls-Royce for a slightly smaller, less ostentatious model and what the company created proved to be so successful that in its 10-year lifespan, the Ghost has become the most successful models in the marque’s 116-year history.
What today’s customers expect
In the 10 years that have passed, much has changed in the world. Attitudes have evolved and even those who buy Rolls-Royce today are younger than ever before. It is time for a new Ghost but before even starting anything, the potential customers had first to be consulted. Rolls-Royce listened carefully to what they wanted, and their expectations indicated that the new super-luxury limousine would have to be dynamic, serenely comfortable and perfect in its minimalism.
“The result is the most technologically advanced Rolls-Royce yet. It distils the pillars of our brand into a beautiful, minimalist, yet highly complex product that is perfectly in harmony with our Ghost clients’ needs and perfectly in tune with the times,” said Torsten Muller-Otvos, CEO of Rolls-Royce Motor Cars as he introduced the all-new second generation Ghost tonight (afternoon in the UK where the global unveiling took place). Pursuing this minimalist aesthetic for new Ghost was the design team’s absolute objective.
Architecture of Luxury
The base on which the new Ghost sits on is the proprietary aluminium spaceframe known as the ‘Architecture of Luxury’ and it is already used for the Phantom as well as the Cullinan SUV. The spaceframe makes possible an acoustically superior, highly rigid and dynamic proposition for a new car.
The Rolls-Royce architecture is based around four fixed points, one at each corner of the motor car. The moveable aluminium bulkhead, floor, crossmembers and sill panels were positioned specifically for ride comfort as well as driving dynamics. Two of the cast suspension mounting assembles were pushed to the very front, placing its engine behind the front axle to achieve an optimum 50:50 weight distribution.
These were undertaken to incorporate an all-wheel drivetrain, all-wheel steering and completely redesigned Planar Suspension System, which further enhances the marque’s hallmark Magic Carpet Ride. This was achieved without compromising the car’s low centre of gravity, which aids cornering dynamics.
To accommodate this without intruding on cabin, its overall length is now 5,546 mm, 89 mm more than the first generation Ghost, while overall width has grown by 30 mm to 1,978 mm.
Further capitalizing on the company’s aluminium expertise, the metal superstructure of the new Ghost is 100% made of the material. The car’s outer body is rendered as one clean, expansive piece, flowing seamlessly from the A-pillar, over the roof and backwards to the rear of the car, recalling the seemingly one-piece coachbuilt Silver Dawn and Silver Cloud models.
The 6.75-litre twin-turbocharged V12 petrol engine still lives under the bonnet, able to deliver ‘near-instant torque and near-silent running’. Specific tuning for this model extracts 563 bhp/850 Nm from the engine, with maximum torque available from just 1,600 rpm, or just 600 rpm above idle. To further refine its already remarkable acoustic properties, the air intake system incorporates larger porting.
Planar Suspension System
The hallmark Magic Carpet Ride has evolved and for the new Ghost, the engineers redesigned the suspension completely and call it the Planar Suspension System. Named after a geometric plane, which is completely flat and level, the system is the result of 10 collective years of testing and development to create ‘a sense of flight on land never before achieved by a car’.
Created through physical engineering developments as well as sophisticated scanning and software technology, it incorporates a world-first Upper Wishbone Damper unit above the front suspension assembly, creating an even more stable and effortless ride. This works alongside the Flagbearer system, which uses cameras to read the road ahead and prepare the suspension system for any changes in road surface, as well as the marque’s Satellite Aided Transmission.
The Upper Wishbone Damper alone was the result of 5 collective years of road and bench testing. Only available in a Rolls-Royce, this technology further evolves the double-wishbone Magic Carpet Ride suspension system.
The 5-link rear axle benefits from self-levelling high-volume air suspension technology, as well as rear-wheel steering. Both axles are managed via the Planar software. This also governs other chassis technologies, including the all-wheel drive, all-wheel steering, stability control and self-drying braking systems.
The Planar software also manages information that requires the car to proactively adapt to intrusions in the road ahead. The technology consists of a stereo camera system integrated in the windscreen to see the road ahead, adjusting suspension proactively rather than reactively up to 100 km/h. The second is Rolls-Royce’s Satellite Aided Transmission system, which draws GPS data to pre-select the optimum gear for upcoming corners. The result is unprecedented levels of ride comfort and control for a car, meeting the expectations of customers.
Clean and healthy air
Carmakers have long given to the cleanliness of air in the cabin and today, this is being taken further to also ensure the air is hygienically clean. For the new Ghost, the company has developed a Micro-Environment Purification System said to be capable of removing nearly all ultra-fine particles from the cabin air in less than two minutes.
Although the owner may spend most of the time in the rear seat, the latest technology would still be desired, especially by today’s generation of customers. To this end, the car has been developed to be ‘the most technologically advanced motorcar Rolls-Royce has ever produced’.
Notable high-tech equipment and features include LED and laser headlights with more than 600 metres of illuminated range; Vision Assist (including day and night-time wildlife and pedestrian warning); Alertness Assistant; a 4-camera system with panoramic view, all-round visibility and helicopter view; Active Cruise Control; an industry-leading 7×3 high-resolution head-up display; wifi hotspot; self-parking; and the very latest navigation and entertainment system.
Audio quality engineered into the car
It is likely that most Ghost owners will have preferences of their own but as a standard offering, the sound system has audio quality that is engineered into the very fabric of the car. A resonance chamber is in the body’s sill section, the frequency response of the Bespoke Audio speaker component defining the chamber’s size and shape. In essence, this transforms the car into a sub-woofer.
A powerful amplifier controls 18 channels (one for each speaker), providing a 1300W output. State-of-the-art optimization technology and high-precision magnesium-ceramic compound speaker cones enable infinitesimal changes in sound with an outstanding frequency response.
Rolls-Royce owners have enjoyed self-closing doors since the first Phantom of modern times. Operated by a button on the dashboard and on the C-pillar for cars with rear doors, this is a much appreciated and celebrated convenience. For the new Ghost, it has been developed further and, for the first time, the occupants can now also open the doors with power assistance.
Minimalist interior mirrors exterior
A clear understanding of the changing luxury consumption patterns of customers and a broader view of emerging design movements suggested that the interior aesthetic should pursue the same minimalist principles as the exterior. However, creating an environment defined by reduction, simplicity and elegance is an extremely complex endeavour. It also relies on sourcing the very finest materials, leathers, woods and metals. To this end, each of the 20 half hides used to create the interior suite of new Ghost are subject to the automotive industry’s most exhaustive quality control checks to ensure that each of the 338 panels used – however visible – is of the very best quality.
Wood sets for the new Ghost are available in an open-pore finish, bravely showcasing materials in their naked form. Indeed, two new finishes have been developed specifically for the car. The first is Obsidian Ayous, inspired by the rich versatility of colours found in lava rock. The second is Dark Amber which introduces subtle glamour to the interior suite by integrating veins of fine aluminium particles into the dark wood.
Post-Opulent design treatment
Finally, something about the ethereal glowing Ghost nameplate, surrounded by more than 850 stars. Located on the passenger side of the dashboard, the constellation and wordmark are completely invisible when the interior lights are not in operation. Perfectly attuned to new Ghost’s Post Opulent design treatment, the Bespoke Collective chose not to use simple screen technology to achieve the effect they desired. Instead, they embarked on creating a highly complex and true luxury innovation. The illumination itself comes from 152 LEDs mounted above and beneath the fascia, each meticulously colour matched to the cabin’s clock and instrument dial lighting.
To ensure the Ghost wordmark is lit evenly, a 2 mm-thick light guide is used, featuring more than 90,000 laser-etched dots across the surface. This not only disperses the light evenly but creates a twinkling effect as the eye moves across the fascia, echoing the subtle sparkle of the Starlight Headliner.
As for the price, well, there isn’t one for a Rolls-Royce in the sense that every unit will have some degree of personalisation so the price will vary from customer customers. Production of the new Ghost is underway and the first owners should be getting their car by Christmas this year.
When a model has been a success – to the extent of being ‘European Car of the Year’ in 2017 – it is a bigger challenge for the product team to come out with a successor. How to make it better than what has already been regarded as a superior product in all respects would have been on the minds of the team.
Well, a full model change is not quite due yet but with the market being so competitive these days, an update has to be significant, especially with the brisk pace of technological advances. So the new 3008 revealed today refreshes the French carmaker’s successful SUV to maintain it as a leading choice for buyers.
Current 3008
Evolutionary changes
The appearance has, predictably, evolutionary changes with ‘an inspired design’ setting the codes for the next phase of modernity, while enhancing refinement and vibrancy. A new frameless grille symbolises the increasingly modern style, while maintaining a fluid design. It extends with fins under the headlamps to connect all of the elements.
To emphasise the sportiness, shiny black side scoops and a painted tread plate have been included into the new bumper from the first trim level. There is also a specific grille on the GT/GT Pack versions, with a scalable design pattern to emphasise the stylistic upgrade of those versions.
The front headlamps have also been redesigned to be more aggressive, standing out with their unique shapes. LED technology is used across the whole range and extended by hook-shaped DRLs with a chrome tip. This light signature is perfectly in line with the current Peugeot style and is identifiable at first glance.
On the GT/GT Pack versions, Full LED headlamps offer an even more high-tech and distinctive look, thanks to the extended light signature and the bend lighting function which optimises visibility at speeds of up to 90 km/h.
Of particular note is the new ‘Foggy Mode’ function which has replaced the foglights. It is integrated into the Full LED headlamps, and switches on the low beam headlamps with reduced intensity when the rear fog lamps are activated.
At the rear, new, upgraded lighting units include Full LED technology (including the reversing light), displaying the 3D ‘claws’ for a distinctive light signature. The indicators are sequential now and the LED lighting units are also installed across the whole range.
The lights are covered with a clear, smoked glass, extending the black boot lid on each side of the vehicle, which helps to visually widen the rear of the vehicle.
Depending on the market and the requirements of the distributor, there are also variable design elements, including a new ‘Black Pack’ option. This has darker elements such as the grille, roof bars, tread plates and wheels.
The new i-Cockpit
One of the features that has won the 3008 high marks is its i-Cockpit and for the latest version, this has changed to be even more modern. The 12.3-inch digital display, fully customisable and configurable, features a panel with ‘Normally Black’ technology for high quality rendering with better readability and contrasts.
The new central touchscreen is 10 inches in viewing size and, as before, the screen has high definition comparable to what you have on a smartphone these days. Below it are a series of 7 piano keys – operated in toggle fashion – allowing direct and permanent access to the main comfort functions.
To complement the update of the i-Cockpit, the interior has new trim with higher perceived levels of quality. High-end versions will have Nappa leather upholstery and Alcantara lining and also available is a range of new exclusive decor such as New Dark Lime Wood and window winders with chrome inserts. The rearview mirror is also frameless now, adding a touch of elegance.
New smart technology
Since this generation of the 3008 was launched, new and more advanced driving aids have been introduced into the market. The new 3008 gets many of these systems which include Night Vision, Adaptive Cruise Control with Stop and Go function, Lane position assist, Active warning of unintentional lane (or roadside) departure, and the latest-generation automatic emergency braking (AEB) which can detect pedestrians and cyclists.
Night Vision is unique in the compact SUV segment as it detects living beings (pedestrians/animals) in front of the vehicle at night or in reduced visibility. The system’s range guarantees detection up to 200 – 250 metres – beyond the range of the high beam – with a central display of the infrared view within the digital meter, and therefore in the driver’s field of vision.
With smartphones an integral part of daily life, the 3008 now integrates information and apps from the device onto the central screen. MirrorScreen compatibility including Apple CarPlay and Android Auto connection protocols make this possible.
Powertrain choices
Peugeot, like other carmakers, has an electrification program for its models as the decade progresses. Besides petrol and turbodiesel engines, there are also hybrid powerplants, along with all-wheel drive and front-wheel drive variants. The PureTech petrol engines are in two displacements – 1.2 litres (3 cylinders) and 1.6 litres (4 cylinders), while the turbodiesel is available with only a 1.5-litre displacement.
The hybrid powertrain for the AWD variant has a 200-bhp PureTech engine working with two electric motors, one at the front and the second positioned on the rear axle. The 2WD variant uses a hybrid powertrain of a 180-bhp PureTech engine with an 80 kW electric motor located at the front.
The lithium-ion battery pack has a capacity of 13.2 kWh and two types of on-board chargers are available – a 3.7 kW single-phase charger as standard and a 7.4 kW single-phase charger as an option. Estimated recharging times range from around 1 hour and 45 minutes to 7 hours.
Revealed today, on sale in 2021
The global online event today has only provided an overview of the new model and the sales launch will take place towards the end of the year in Europe. The Malaysian market should see it some time in 2021, perhaps faster than usual since the PSA Group now has the Naza factory in Kedah that serves as a regional production hub, supplying the 3008 and 5008 to ASEAN markets.
