English Archives

CUPRA is first carmaker to join new EXTREME E off-road championship

Extreme E is a new off-road series which, like Formula E, will be for all-electric vehicles. Set to start off in January 2021, the series will have 5 rounds in places which have been damaged or affected by climate change. The environments will be Arctic, Desert, Rainforest, Glacier and even Ocean.

While some companies have expressed interest in participating, CUPRA, the high-performance brand of Spanish carmaker SEAT, has confirmed its commitment to the event. CUPRA will collaborate with ABT Sportsline as the racing team’s main partner, and will contribute a team of engineers and drivers.

Electrification and sportiness
“CUPRA and the Extreme E competition hold an identical challenger attitude to prove that electrification and sportiness can be a perfect match. Such partnerships boost our path towards electrification as we will have 2 plug-in hybrid models by the beginning of 2021 and our first all-electric vehicle, the CUPRA el-Born, that will be ready by the second half of next year,.” said President of SEAT & CUPRA, Wayne Griffiths.

CUPRA’s enthusiasm should be a surprise as the brand has already been involved in electrically-powered racing cars. It developed the CUPRA e-Racer which is the world’s first all-electric racing touring car, powered by 4 electric motors that deliver a combined 680 ps/ 960 Nm.

That project helped the brand develop its knowledge base as it continues along the road towards electrification of its passenger vehicle line-up. Now it has the CUPRA Leon plug-in hybrid, which will be followed at the beginning of 2021 by the CUPRA Formentor plug-in hybrid, and then the CUPRA el-Born in the second half of next year.

Crews must have one male, one female
The Extreme E has a gender equal sporting format whereby teams must field one male and one female driver. The first of these is CUPRA e-ambassador, Rally Cross and DTM Champion, Mattias Ekstrom.

*Sara Price is one of the drivers in the event, and she will be with the American Chip Ganassi Team.*

“Extreme E is a mix of Raid and Rally Cross, racing through very different environments with tracks marked using GPS,” said Ekstrom. “But it holds a lot of promise for developing electric vehicles; collecting data to feedback into cars in areas such as software and regeneration.”

There are a great many areas where know-how can be transferred, that should bring huge developments to future vehicles in areas including driveability, power delivery, chassis setup and steering. Additionally, participating in Extreme E will boost the visibility of the brand.

Where and when
The championship, managed by the same organisation that does Formula E, is recognised as an FIA International Series. At the time of writing, there are 8 teams on the list of participants, with CUPRA being the first carmaker to join.

Extreme E’s will see the participants and their vehicles and equipment going around the world. To provide transport to remote locations, a floating paddock and base has been developed. This is the RMS St. Helena, which will be used to transport the championship’s freight and infrastructure, including vehicles, to the nearest port to each of the 5 locations. This will also minimise Extreme E’s emissions profile as well as facilitating scientific research through an on-board laboratory.

After Formula E, Extreme E will take electric cars into off-road competition

Euro NCAP evaluations now include Highway Assist systems

Euro NCAP, the independent organization which evaluates the safety levels of vehicles sold in Europe, has developed a dedicated test and assessment protocol, as well as a grading system for its Highway Assist tests. These tests are aimed at ensuring the safe adoption of assisted driving technologies and to provide consumers information to make their buying decisions.

Increasingly, vehicle manufacturers have been making use of the sensor-sets fitted to their vehicles to provide more extensive support to the driver. This is a prelude to greater autonomous motoring that will come in future.

Highway Assist
Highway Assist, the general name for a technology designed to make highway driving safer, helps by reducing fatigue. The system can help the driver to maintain a steady cruising speed, and to keep a safe distance from the vehicle in front. Such systems are generally known as Adaptive Cruise Control and can be found on an increasing number of models.

*Adaptive Cruise Control can adjust the set cruising speed to maintain a safe gap with a vehicle ahead.*

There is also a system to help keep the vehicle within its lane, with sensors monitoring lines on the road for guidance. If the vehicle is found to be departing from the lane, the driver will be alerted and some systems can also exert force to guide the vehicle back into the correct position in the lane.

However, the driver always needs to be responsible and engaged behind the wheel – the assisted system is there to do just that – assist. The systems are not flawless and should not lead or have full control, at least not at this stage in semi-autonomous motoring.

*A camera monitors road lines to determine the position of the car in the lane, and the system will alert the driver if the car deviates from the lane.*

The test series has so far covered 10 models that offer Highway Assist – the Audi Q8, BMW 3-Series, Ford Kuga, Mercedes GLE, Nissan Juke, Peugeot 2008, Renault Clio, Tesla Model 3, Volkswagen Passat and Volvo V60.

Euro NCAP’s new assessment protocols focus on two main areas: Assistance Competence – a balance between the technical competencies of the system (Vehicle Assistance) and the extent to which it keeps the driver alert and engaged (Driver Engagement) – and Safety Back-up, the car’s safety net in critical situations.

A unique grading system – similar to the 5-star safety rating – helps consumers understand the conclusions of the tests and compare assistance performance at the highest level. Each model falls into one of 4 categories: Entry, Moderate, Good and Very Good.

The findings
Three models in the premium segment – the Mercedes-Benz GLE, the BMW 3-Series and Audi Q8 – were graded Very Good, achieving a good balance between offering a high level of driving assistance but keeping the driver engaged and in control of the driving task. They also provide a good crash avoidance back-up system and respond appropriately if the driver becomes incapacitated while the car is in assistance mode.

High volume sellers Renault Clio and Peugeot 2008 were both given an Entry grade. Lacking the sophistication of the more advanced systems tested, they provide a relatively modest level of assistance, ensuring that the driver is not disengaged from the driving task.

Tesla’s pioneering role in self-driving technology is reflected in its top scores for Vehicle Assistance and Safety Back-up. However, its Autopilot system was found to do little to keep the driver engaged. Its distinct steering strategy gives the impression that either the car is driving itself or the driver has full control, and the system is more ‘authoritarian’ than cooperative. Grading-wise, the car is badly let down by its performance in Driver Engagement and ended up ranked ‘Moderate’.

The Volkswagen Passat, Nissan Juke and Volvo V60 were also graded as Moderate. In particular, the Volvo, already on the market for a few years, shows that rapid advancements made in driving assistance technology require more frequent updates to keep up with premium cars. Finally, Ford’s latest Kuga achieved a Good grading, demonstrating that well-balanced, advanced systems are also available on mainstream mid-class vehicles.

Improved driver monitoring necessary
“Assisted driving technologies offer enormous benefits by reducing fatigue and encouraging safe driving. However, manufacturers must ensure that assisted driving technology does not increase the amount of harm incurred by drivers or other road-users compared to conventional driving. The best systems offer a balance between the amount of assistance they provide and the level of driver engagement – and should be supported by an effective safety back-up,” noted Dr. Michiel van Ratingen, Euro NCAP Secretary General.

“The results of this round of tests demonstrate that driving assistance is fast becoming better and more readily available, but until driver monitoring is significantly improved, the driver needs to remain responsible at all times.”

Euro NCAP assessments become tougher in 2020 with new protocols

New Vehicle Sales And Production Summary For September 2020

*Source: Monthly reports of Malaysian Automotive Association*

♦ The government’s Sales Tax exemption incentive continued to encourage many to buy new vehicles in September, pushing the Total Industry Volume past 56,000 units. In fact, it was 26% higher than the same month in 2019.

♦ Of the 56,444 units registered, 9.7% were commercial vehicles which includes pick-up trucks.

♦ Cumulative sales after 9 months have reached 341,489 units, To achieve the MAA’s 470,000-unit forecast for 2020, the industry must sell an average of 42,837 units in the remaining 3 months. Since July, the monthly sales have been over 50,000 units so the question will be whether this level can be sustained until the end of the year?

♦ Production rose slightly as most plants assembled as many units as possible to meet the higher demand. The output rose of 51,987 units was 15% higher than the same month in 2019, but output of commercial vehicles was lower by 26%.

♦ October numbers could be lower as the burden of making monthly instalments has resumed with the cessation of the loan moratorium that was provided by the banks as a form of assistance during this pandemic period. Furthermore, the imposition of the CMCO for two weeks in the month (if not longer) in the region with the most new vehicle sales may have an effect too. However, unlike the situation in March when all car companies had to suspend all activities, businesses can presently continue operating and relevant government agencies also process new vehicle registrations.

Volvo takes a different approach to helping reduce distractions to drivers

As a leader in automotive safety, Volvo has obviously stayed abreast of all developments which affect drivers and driving. Understanding that maintaining concentration on driving and on the road ahead are vital for safety, the focus has always been to minimise distractions.

In the early 2000s, for example, the company introduced IDIS (Intelligent Driver Information System), an innovative feature in the S40. IDIS helped the driver prioritise the information and services in the car depending on the current driving situation. If necessary, the system would delay incoming phone calls and other information during times when the driver was in a situation of higher ‘workload’.

*2nd generation of the S40 had IDIS (Intelligent Driver Information System) to reduce distractions during times when the driver was in a situation of higher ‘workload’.*

More distractions today
In more recent times, with the increased use of smartphones and touchscreens inside cars, there has been a growing debate around the dangers of distraction behind the wheel. There are laws that restrict use of mobilephones during driving, and to address this, manufacturers installed handsfree systems to manage calls.

However, the safety experts at Volvo Cars see the issue n a different light. They say that distraction is ‘a fact of life’, and that technology should be used to support people in their daily commute. The company’s own safety research and behavioural science work suggests that when used correctly, modern technology inside the car can actively reduce distraction, boost road safety and help people to be better and more focused drivers.

“It is easy to think that phones and screens are the only scourge of the modern driver, but life as a whole is distracting,” said Malin Ekholm, Head of the Volvo Cars Safety Centre. “We know people do not get distracted on purpose, but it happens. You could be late for an appointment and somewhat stressed, or you get behind the wheel after a bad day at work – all this affects you as a driver.”

*Perhaps older cars were ‘safer’ because the driver had less devices on-board to distract him?*

How drivers and society really operate
Some would say that from a distraction point of view, a car from the 1940s is safer than today’s cars – after all, it does not contain a screen, phone connectivity or even a radio. But that is not how today’s drivers and society operate.

“The reality is that people want to engage with friends, family, work and entertainment, and everyone responds differently to distraction,” said Ekholm. “So we want to meet our customers where they are, not where we want them to be. That is why our focus is on using technology in the right way, so we can use it to help you stay safe behind the wheel.”

Volvo Cars actively uses technology to combat the dangers of distraction, so as to offer some of the safest cars on the road. For example, its Active Safety systems with autobrake and steer assist are designed to be on guard to help drivers if they lose concentration or are distracted for a split-second.

*All-electric XC40 Recharge has a new Android-powered infotainment system that can help reduce distractions.*

Andorid-powered infotainment system
In the new XC40 Recharge Pure Electric, an advanced voice control on Volvo Cars’ new Android-powered infotainment system allows drivers to control the temperature, set a destination, play their favourite music and podcasts or call their mum on her birthday – all while keeping their hands on the wheel and eyes on the road ahead.

“Being able to control key features on your Volvo by voice allows you to keep your hands on the wheel and your eyes on the road,” said Ekholm. “Active Safety systems such as City Safety, Run-off Road Mitigation and Oncoming Lane Mitigation with Steer Assist can act as an extra pair of eyes watching over you.”

Volvo Cars believes that distraction should also be addressed via in-car cameras and other sensors that monitor the driver. With such technologies, if a clearly distracted (or drunk) driver does not respond to warning signals and risks a serious, potentially lethal accident, the car could intervene.

That intervention could involve limiting the car’s speed, alerting the Volvo on Call assistance service and, as a last resort, actively slowing down and safely parking the car. Volvo Cars plans to start introducing these cameras on the next generation of Volvo’s scalable SPA2 vehicle platform.

*Volvo has already installed Active Safety Systems that can spot pedestrians and animals on the road and stop the car if the driver does not take the right action.*

Humans have not changed much during a couple of thousand years. It’s a huge challenge to educate a human being into the perfect driver so Volvo designs its vehcles instead to help prevent the driver from having an accident – and to protect everyone in the car as well as possible if a crash is unavoidable.

Soon, you will be able to go only up to 180 km/h in any Volvo

Another 49 employees at Proton Shah Alam factory found to be infected with COVID-19

Following an earlier report of one employee at the Proton complex being found to have tested positive for COVID-19 on October 14, the carmaker has now found that there are another 49 others who are also infected at the Shah Alam, Selangor, facility. All the affected personnel are from the Engineering Division at the facility.

Beside notifying the authorities, Proton has requested all non-essential personnel who work within the facility to work from home as a precautionary measure. The company has been adhering to official protocols and SOPs and will continue its efforts with more stringent actions to ensure prevention of further spread.

*Proton head office and Centre of Service Excellence/Showroom in Shah Alam, Selangor*

Hourly disinfection procedure at COSE
Contact tracing is ongoing and a COVID-19 team is monitoring the situation very closely. In a statement issued this evening, Proton reassures all its customers that it will continue to strictly follow all guidelines and procedures as it has been doing from the start of the pandemic. The Centre of Service Excellence (COSE) and showroom are disinfected hourly and all customer-facing personnel follow a rigorous procedure.

“Proton is working with the authorities who have guided the company through the process and are satisfied with the actions taken thus far. The safety of all Proton staff, customers and Malaysians is of the utmost importance to the company and will be its main priority,” the statement said.

Proton employee tested positive for COVID-19

6 Mazda models recalled for fuel pump replacement

Mazda Corporation has announced a product recall of 6 of its models which were manufactured between 2017 and 2019. The recall is a precautionary measure relating to a fuel delivery module (fuel pump) which needs to be replaced. A defect in the module could result in loss of engine power or vehicle stalling.

19,685 units in Malaysia
Mazda vehicles sold in China, ASEAN and other are affected and in Malaysia, Mazda has identified a total of 19,685 units of vehicles affected. The model ranges affected are the Mazda2, Mazda3, Mazda6, CX-3, CX-5 and CX-9. Bermaz Motor, the distributor, stresses that all 2020 production models are not affected.

Owners being notified my mail and SMS
Bermaz Motor is handling the matter as quickly as possible to minimise inconvenience to owners. All owners of affected vehicle will be informed via notification letters and mobile SMS, which will include details of the product recall. Upon receipt of notification to replace the fuel pump, they should contact any Bermaz authorized service centres to make an appointment for the replacement.

In the meantime, if an owner experiences unusual conditions while driving the vehicle, it is important to stop the vehicle in a safe place and make contact with a Bermaz authorized dealer or service centre for advice and assistance.

Replacement costs are covered by Bermaz
The replacement of the fuel pump all costs related to this activity will be borne by Mazda Motor Corporation. The duration of work is estimated to take approximately 1.5 hours or slightly longer, depending on the model and the service centre workload at the time of appointment. Replacement stocks will be available in stages.

It is possible that some owners may not receive the notification as they may not be the original owners and their contact details might not be with Bermaz. In such a case, they can check by visiting the Mazda Recall Information Centre website at mazda.com.my/mazda-recall-information-centre. By providing their vehicle chassis number, they will be able to know if it is on the recall list.

Click here for other news and articles about Mazda and Bermaz Motor.

FEATURE: A closer look at the Nissan Almera Turbo engine

Three-cylinder engines in cars are nothing new; Daihatsu popularized the engine configuration in the late 1970s with its Charade and then it was widely used by Perodua. Since the 21^st century began 20 years ago, manufacturers have been downsizing engines as one way to reduce fuel consumption. However, unlike those older small engines, today’s downsized engines have a lot of advanced technology to help them develop high outputs and run even more efficiently.

The HR10DET engine in the all-new Nissan Almera Turbo is a good example. It has a displacement of 1 litre but can generate up to 100 ps with 152 Nm. This is comparable to a 1.5-litre engine so the driver enjoys the benefit of a smaller displacement which will consume less fuel – without sacrificing performance, which was the case before.

Some of the features which helps the HR10DET engine, which has 3 cylinders, achieve its high output are 4 valves per cylinder for better breathing efficiency and two overhead camshafts in the cylinder head (DOHC).

Boost from turbocharger
A major contributor to the power output is the use of a turbocharger. Once found only in high-performance engines, the turbocharger is now commonly used for small engines to boost output and response. In the case of the Nissan engine, maximum torque is available between 2,400 and 4,000 rpm, a range that is frequently used in daily driving. With maximum torque available, overtaking can be done quickly and safely.

The turbocharger has an Electronic Wastegate which operates far more efficiently than a conventional mechanical wastegate. A sensor monitors compression levels and enables the wastegate to activate whenever necessary, allowing turbocharging to be maximized. As a result, turbo lag is virtually eliminated for strong acceleration when needed.

Cooling down the air
For a turbocharger to operate at its best, the air flowing through needs to be cool so it can be compressed as much as possible, maximizing the charge. For this reason, an intercooler is installed behind the front grille and effectively cools down the air.

Technology from GT-R engine
Friction robs an engine of power and engineers work hard to find ways to bring internal friction down. For the HR10DET engine, they drew on the Mirror Bore Coating technology from the legendary Nissan GT-R. Mirror Bore Coating technology can raise energy efficiency by reducing the friction significantly inside the engine.

Rather than inserting a cylinder liner, the technology uses molten iron sprayed onto the surface of the cylinder bore to form a layer of iron coating on the walls inside. This achieves a mirror-like finish that is exceptionally smooth, thereby bringing down friction levels.

Normally, the cylinder liner is 2 mm thick but with Mirror Bore Coating technology, the layer is just 0.2 mm thick, saving weight. The extremely thin layer allows better heat conduction which results in enhanced cooling performance and less engine knocking. The efficiency of the engine as a whole is improved, and fuel economy as well as engine power are enhanced.

D-Step Logic System
The powertrain of the Almera Turbo also includes a next-generation XTRONIC CVT with D-Step Logic System to improve shift feel and responsiveness. The D-Step Logic System is a computer program that uses dynamic inputs such as vehicle speed, accelerator pedal position and application speed to determine ideal gear ratios needed to provide smooth, constant acceleration.

Drivers will feel the shifting being like a conventional automatic transmission with a torque converter (which we can confirm after our short test drive) and with the flexibility and smoothness of a CVT. A Sport mode is available to gain stronger acceleration when required.

“The all-new 1-litre turbo engine is designed to meet our customers’ needs. It provides the highest level of fuel economy – up to 18.4 kms per litre – which can provide up to 650 kms on one full tank. The CO2 emission level has also significantly been reduced by 18% compared to its predecessor. making the All-New Almera Turbo even more environmentally friendly,” said Christopher Tan, Sales & Marketing Director of Edaran Tan Chong Motor.

Selected Nissan showrooms around the country are offering test-drives of the new model so you can experience for yourself the performance of the car. Visit www.almeraturbo.com.my to locate a showroom and by the way, when you take a test-drive, you could also win an Apple iPhone SE worth RM2,199.

Lamborghini Urraco celebrates 50th birthday

Automobili Lamborghini was established in 1963 and the sleek design of its sportscars and their high performance helped to build its reputation very quickly. With Bertone providing the designs, some of which were futuristic, almost any Lamborghini was bound to turn heads as it passed by.

Innovative technical solutions
One model which stood out for having introduced innovative technical solutions was the Urraco (Italian for ‘little bull’). Renowned designer Marcello Gandini, the principal designer at Bertone, styled the car which was unveiled 50 years ago this month at the Turin Motor Show.

The Urraco, with its sharp features, was a fast 2+2 coupe, with a mid-mounted V8 rear engine and independent MacPherson strut system on both front and rear – the first time on a production car. Only 4.25 metres long, the Urraco’s interior space was designed with an advanced theme.

Three engine sizes
Initially, it was powered by a 2.5-litre V8 producing 220 bhp at 7,800 rpm and maxim torque of 176 Nm, which took it to a top speed of 245 km/h. An interesting feature of the V8 engine was a single overhead camshaft per bank.

The technical refinement was completed by the use of a Heron chamber cylinder head with flat inner part and the combustion chamber contained in a depression in the top of the piston. This allowed for a higher compression ratio to be achieved without increasing the production costs. Another novelty for Lamborghini was the installation of 4 Weber double-body 40 IDF1 type carburettors.

The Urraco with a 2.5-litre engine, produced from 1970 to 1976, was produced in the largest volume – 520 units. A complementary variant was introduced at the 1974 Turin Motor Show which had a smaller displacement of 2 litres (217 bhp/220 Nm). This was mainly to suit the Italian market which had changed tax laws in the early 1970s. This variant was available between 1975 and 1977.

For other markets, Lamborghini was able to offer a bigger 3-litre engine that produced up to 265 bhp/265 Nm. This was sold from 1975 to 1979, and accounted for 24% of all Urracos produced. Lamborghini had hoped to sell up to 1,000 Urracos each year but in the end, only 776 were ever produced in total.

More automation in production
The production system for the car was also innovative. From the early stages, it was planned to make more use of the manufacturing capacity at the factory. The Urraco was to be much less artisanal than the other Lamborghini models which it shared little with. With computer-controlled processes, this would also enable higher output and, in keeping with the strategy of Ferruccio Lamborghini, make a Lamborghini more accessible to a wider, albeit still limited, group of customers.

Lamborghini Aventador SVJ 63 Roadster commemorates company’s founding year

Mercedes-Benz EQC 4×4² proves e-mobility can go further off-road

With electric vehicles going to take over in coming years, will some segments disappear? Will the rugged 4×4 vehicles and pick-ups slowly fade away? Not likely if we look at what Mercedes-Benz is working on as its electrification program progresses.

The company has revealed a prototype which uses a drivable technology platform on the basis of an EQC 400 4MATIC that is now on sale. Known as the EQC 4×4², this SUV is able to go further on rough terrain using future-oriented technology.

Technology platform
With the EQC 4×4², Mercedes-Benz engineers will test the limits of the vehicle and show that e-mobility is not just urban but also conceivable off-road. The one-off prototype was developed by a cross-departmental team as a technology platform.

“Our aim is to combine modern luxury and sustainability with emotional appeal. The EQC 4×4² shows how enjoyable sustainable mobility can be. This is where electromobility high-tech and an intriguing customer experience are transferred to the mountains, thanks to MBUX and over-the-air updates. To put it succinctly, electric, progressive luxury goes off-road,” said Markus Schafer, member of the Board of Management of Daimler AG and Mercedes-Benz AG responsible for Daimler Group Research and Mercedes-Benz Cars COO.

“This drivable study clearly shows that, alongside a passion for e-mobility, we at Mercedes-Benz lay a strong claim to leadership in this sector and will heighten the emotional appeal of this even further in the future,” he declared.

The capabilities of the EQC 4×4² include driving through sand in desert regions and on beaches, on rocky terrain and through mountain streams. As well as great reliability and corresponding comfort, the mature genes of the standard model also allow trailer operation and installation of a roof-rack. A roof-tent and inflatable dinghy allow the remotest areas to be reached.

Very generous ground clearance
At 293 mm, the EQC 4×4² rides more than twice as high as a production EQC; even a G-Class is 58 mm lower. The fording depth is increased by 15 cm to 40 centimetres and, of course, all necessary measures are taken to protect the many electronic systems and battery pack.

The generous ground clearance is made possible by the conversion to portal axles. Unlike conventional axles, the wheels are not at the height of the axle centre but are instead situated much lower down on the axle hubs owing to the portal gears. Or conversely, the entire vehicle moves up.

The reprogrammed Off-Road drive programs take advantage of the high-performance logic of the current GLC models. For example, using targeted brake interventions, this enables an improved torque curve when starting on loose ground. In combination with the tyres (285/50R20), this results in very good traction.

Soundscape gives feedback to driver
Another highlight of the EQC 4×4² is the sound experience with its own ‘soundscape’. The acoustic production comprises sounds that give the driver feedback on system availability and vehicle parking. It is influenced by various parameters such as the position of the accelerator pedal, speed or energy recovery rate.

The technology uses intelligent sound design algorithms to calculate the sounds coming from the amplifier of the sound system in real time and the interior loudspeakers to reproduce them.

The production EQC uses the external noise generator (Acoustic Vehicle Alert System, AVAS) required by law to reproduce the sounds. The EQC 4×4² has a more powerful AVAS composed specifically for it and uses the headlamps as external speakers for this purpose. The reason for this is that the sound experts at Mercedes-Benz have made creative use of the available installation space in the headlamp housings – thus the ‘lampspeaker’ was born.

The EQC 4×4² is actually the third model of the 4×4² family from Mercedes-Benz. The G 500 4×4² has been around since September 2015, and in 2017, came the E 400 All-Terrain 4×4² study. For now, the EQC 4×4² remains a study, a vehicle for the engineers to test new technologies. However, if response from the public proves to be good and there is a business case, perhaps Mercedes-Benz will turn it into a production model in future.

The new Mercedes-Benz GLB-class

Covid-19 — Fighting COVID-19 is our joint responsibility. Protect yourself and others: make these 6 simple precautions your new habits.

Gulf Oil-themed McLaren Elva to debut at Goodwood SpeedWeek

McLaren Automotive today unveiled the McLaren Elva Gulf Theme by MSO (McLaren Special Operations), a celebration of the renewed relationship between McLaren and the Gulf Oil brand which existed 60 years ago. It’s another example of how designs from McLaren’s racing history are inspiring the brand’s modern-day customers.

The unique McLaren roadster in blue and orange Gulf colours will makes its world debut at Goodwood SpeedWeek, a ‘closed-door’ live broadcast event bringing together the past, present and future of motoring and motorsport at the Goodwood Motor Circuit in the UK.

New partnership with Gulf
McLaren and Gulf recently confirmed a new partnership that renews a historic union between the two brands that originated in the 1960s, a decade when both companies made their first forays into motorsport. Gulf branding appeared on McLaren’s Can-Am, Formula 1 and Indy cars from 1968 to 1973. Two decades later, McLaren F1 GTRs run by customer team GTC carried the famous Gulf livery in global GT racing, including at Le Mans.

Under the new partnership, McLaren Automotive customers will have the opportunity to commission Gulf-liveried cars directly from MSO. These follow cars inspired by the famous livery designed and produced by MSO prior to the renewed relationship being agreed.

Most recently, a McLaren Senna GTR LM paying homage to the #24 McLaren F1 GTR that finished fourth in the 1995 24 Hours of Le Mans race was completed as one of five MSO-designed customer cars celebrating the McLaren F1’s domination of that race.

“The McLaren Elva Gulf Theme by MSO is a striking celebration of both McLaren’s history in sports car racing and our new partnership with Gulf Oil. McLaren Special Operations is committed to pushing the boundaries of the ‘art of the possible’ and projects like this showcase the increasingly extensive range of personalisation options we can offer customers – in this case, enhancing the authenticity of the livery by incorporating Gulf brand logos into the design,” said Ansar Ali, Managing Director of MSO.

McLaren Ultimate Series
The Elva, which follows the McLaren P1TM, McLaren Senna and Speedtail in McLaren’s Ultimate Series, links McLaren’s heritage to its present and future with a name and style that recalls the McLaren-Elva sports racers of the 1960s. These were among the first sportscars designed and raced by Bruce McLaren and the company he founded, and the new Elva evokes the true spirit of driving enjoyment symbolised by this era.

In line with McLaren’s on-going commitment to super-lightweight engineering, the new Ultimate Series roadster retains the lightweight construction philosophy of its forebear and is at the cutting-edge of automotive technology.

The body design of the screenless, roofless Elva, for example, incorporates an innovative Active Air Management System that creates a virtual canopy over the seamlessly-integrated cockpit. It is powered by an 815 PS/800 Nm 4-litre, twin-turbocharged V8 engine.

Only 149 units
With deliveries of the Elva commencing this year, MSO has already completed the specification of the first cars and is well-advanced in discussions with customers to create further dramatic paintwork and liveries. Just 149 examples of the Ultimate Series roadster will be available to customer order, making it one of the rarest McLarens ever produced.

New 765LT continues the McLaren ‘Longtail’ story

Piston.my

English

CUPRA is first carmaker to join new EXTREME E off-road championship

Euro NCAP evaluations now include Highway Assist systems

New Vehicle Sales And Production Summary For September 2020

Volvo takes a different approach to helping reduce distractions to drivers

Another 49 employees at Proton Shah Alam factory found to be infected with COVID-19

6 Mazda models recalled for fuel pump replacement

FEATURE: A closer look at the Nissan Almera Turbo engine

Lamborghini Urraco celebrates 50th birthday

Mercedes-Benz EQC 4×4² proves e-mobility can go further off-road

Gulf Oil-themed McLaren Elva to debut at Goodwood SpeedWeek

Mercedes-Benz Expands in Asia-Pacific with New Regional Logistics Center in Malaysia

Test Drive The New Omoda C9 This Weekend!

GWM Malaysia Secures 1,500 Bookings for the Haval H6 HEV

PDRM Accumulated RM6.53 billion in Unresolved Summons Since 1990

Audi Expands in China: New SAIC Partnership to Launch Premium AUDI EV Models

Malaysia Introduces High-Speed Weigh-In-Motion System to Curb Overloaded Vehicles

Continental Tyres Partners with TNG eWallet for Seamless Purchase and Installation

Tragic Bus Electrocution Prompts Calls for Mandatory Electrical Inspections in Public Transport

Perodua Wins RM516,777 Lawsuit Against Counterfeit Lubricant Supplier in Trademark Case

Honda Malaysia Announces Product Update For Civic, Civic Type R, And CR-V

Archive

MG Cyberster Launched in Malaysia: RM319,900 – MG3 HEV and MG7 Showcased

Proton Introduces ProCare Smart Plan for Enhanced Cost Savings

Penang Extends Free Bus Services with RM7 Million Pas Mutiara Allocation for 2025

Proton Gears Up for Sepang 1000KM with New S70 R3 Race Car and Star Drivers

Proton e.MAS 7 Tour Kicks Off an Electrifying Chapter for Malaysia’s First National EV Brand

Follow us on Facebook

Follow us on YouTube

The Piston Show