Piston.my

Archive

Lexus has marked another significant advance in automotive lighting technology with the introduction of a BladeScan-type adaptive headlight system, a world-first. To be offered on coming models starting with the new RX, BladeScan gives both an extended field of forward illumination and more accurate lighting control to support safer driving at night and in poor weather.

The current RX already benefits from automatic or adaptive high-beam LED lighting as part of the Lexus Safety System+ package of active safety features, to maximise headlight illumination without the risk of dazzling other road users.

BladeScan goes further by providing more precise photometric control of the area of illumination in front of the car, with accuracy to within 0.7 degrees compared to around 1.7 degrees for the current technology. This means it can light up areas that would be difficult to see with a conventional high-beam system, such as the road margins, and give earlier illumination of road signs and pedestrians.

Lexus BladeScan technology

Longer range for pedestrian recognition
With BladeScan, pedestrian recognition at night has been improved to 56 metres in front of the RX, compared to 32 metres with the current system. This obviously makes night driving much safer as the driver will also be able to spot pedestrians from a greater distance and drive carefully.

While other manufacturers have increased the number of LEDs in their headlight systems to improve lighting resolution, Lexus’s system uses a more cost-effective array of LEDs. These are contained in a compact module located in the front corner of each headlamp, alongside the familiar triple-eye light arrangement.

Lexus BladeScan module

Rather than shining light forwards, the LEDs in each BladeScan module cast light diagonally across two blade-shaped mirrors that rotate at high speed. The precise synchronisation of the mirror rotation and the switching on and off of the LEDs creates the shading effect; the light is then reflected into a lens which casts the beam on to the road ahead, without the risk of dazzling oncoming traffic or drivers of vehicles ahead.

The new system is another example of the brand’s reputation for technical innovation. It was the to introduce LED headlights on its LS flagship model in 2007, and the first to produce adaptive high-beam headlights, again initially for the LS, in 2012.

Visit www.lexus.com.my to know more about Lexus models available in Malaysia

Click here for other Lexus news and articles on PISTON.MY

PISTON.MY

 

Sime Darby Auto ConneXion (SDAC) doesn’t let a year go by without making the Merdeka/Malaysia Day celebrations special for its customers. This year, the company’s sales promotion focusses on its Ranger model line with extras for those who buy and register a new vehicle during the promotion period.

The extras for 2019
From August 1 to September 30 2019, customers who purchase either the Ranger WildTrak or Ranger Raptor will enjoy free scheduled maintenance for the first 2 years. Additionally, they will receive a complimentary PETRONAS Gift Card pre-loaded with RM1,000 for purchases at PETRONAS stations nationwide.

Ford Ranger Raptor
Ford Ranger Raptor

Customers who prefer the Ranger WildTrak and become owners during this promotional period will receive a rebate of RM3,000, reducing the H-P loan they take and therefore lowering the monthly instalments.

“We are constantly looking for meaningful ways to appreciate our customers. This new deal offers customers more peace of mind and value-add with free maintenance and attractive rewards in conjunction with the upcoming celebrations,” said Syed Ahmad Muzri Syed Faiz, Managing Director of SDAC.

Ford Ranger Wildtrak
Ford Ranger Wildtrak

SDAC’s Motor Insurance Package
With their vehicle purchase, they can also opt for the Sime Darby Auto Connexion Motor Insurance Package which offers additional benefits and privileges for greater peace of mind.

For example, besides 24-hour emergency towing and roadside repair, approval for estimation on repair works below RM20,000 can be obtained within 24 hours (terms and conditions apply). You have the option either to get full compensation for theft or total loss based on agreed value for the first 10 years (T&C apply).

Both variants, as with the rest of the Ranger line-up, come with a full manufacturer’s warranty of 3 years or maximum of 100,000 kms.

Built Ford Tough
Since its introduction in the 1990s, the Ranger has been a benchmark for pick-up trucks, especially with its ‘Built Ford Tough’ reputation.

A benchmark for pick-up models
Since being introduced in the ASEAN region first – and then globally – in the 1990s, the Ranger has proven in many ways to be the industry benchmark in the pick-up truck segment. Various generations have received awards in Malaysia and other markets for product excellence.

The popularity of the Ranger continues in 2018 as SDAC reported that its sales performance gained 1.7 percentage points from the same period last year to 17.2% in the pick-up segment.

“The ‘Built Ford Tough’ Ranger continues to earn the favour of customers across the country and build on its growing success in the market,” said Truong Kim Phong, MD, Asia Pacific Emerging Markets, Ford Motor Company.

Visit www.sdac-ford.com.my to locate a showroom in Malaysia where you can view, test or purchase a Ranger.

Click here to read other news and articles about Ford and SDAC on PISTON.MY.

PISTON.MY

 

TRAPO Asia has launched their latest customized car mat solution called the TRAPO Mark II. The latest addition to their ever-growing range of products aims to provide an elevated driving experience where it can be tailor fit and customized for any car models here in the country. (more…)

The latest addition to the Audi range available here in Malaysia has arrived in the form of the new Audi A7 Sportback. Representing the brand’s new design language, the A7 Sportback is a four-door coupe injected with a huge dose of luxury, sporty driving experience, and versatile space concept. (more…)

Hyundai Motorsport is planning to enter a new era as they have begun work on a very exciting electric race car. This will be their first-ever electric vehicle and what better way to showcase it than jumping all the hurdles straight to a race car. Is it going to be a race-spec electric i30? We can only hope, for now. (more…)

20 years ago, Porsche introduced a new 911 variant that it designated ‘GT3’. The designation was taken from a class of endurance racing cars, indicating that this was a variant focused on track performance. Porsche promised a particularly visceral driving experience by offering motorsport technology for the road.

A high-revving naturally-aspirated flat-6 engine closely related to the engine used in motorsports, rear wheel drive, lightweight construction, upgraded aerodynamics and track-focused suspension and brake systems have been defining characteristics of this model throughout its 20-year history.

1999 Porsche 911 GT3
The first 911 GT3 was introduced at the 1000 Geneva Auto Salon

The beginnings
The first 911 GT3 model was introduced to the European market in 1999. It was one of the first production cars to officially lap the legendary Nurburgring-Nordschleife in less than 8 minutes. The rally legend Walter Rohrl was at the wheel and took just 7:56.33 minutes – a sensation at the time.

The car distinguished itself from rear-wheel drive 911 Carrera models through a 30-mm reduction in ride height, pronounced front fascia, visible side skirts and a fixed rear wing – all designed to reduce lift while still delivering a very efficient 0.30 Cd. The angle of attack of the rear wing was adjustable for use on closed-course tracks.

The original GT3 was powered by a 360 ps 3.6-litre naturally-aspirated flat-6 engine derived from the Le Mans-winning 911 GT1 racing car and it revved up to 7,800 rpm. Mated to a 6-speed manual transmission carried over from the 911 GT2 (993 generation), the first GT3 reached a top track speed of 300 km/h.

The track-focused model also featured staggered 18-inch wheels and tyres, larger brakes compared to the 911 Carrera, a standard limited slip differential, and an upgraded suspension that allowed for greater mechanical adjustment of anti-roll bars and suspension geometry for closed-course track setup. Taking advantage of weight savings measures such as the deletion of air-conditioning and rear seats, the GT3 weighed just 1350 kgs.

Porsche 911 GT3
First 911 GT3 and latest (991.2) generations

The first successor
4 years later, the GT3 received significant updates based on the facelifted 996 generation 911. Power grew to 381 ps, torque rose from 370 to 386 Nm, and the redline climbed to 8,200 rpm. This was possible by updating the engine with longer titanium connecting rods, lighter pistons, the variable camshaft adjustment system VarioCam, and lighter intake and exhaust valves.

In addition to a restyled fascia, a new rear wing and updated wheel design, this 2004 model featured wider front and rear tyres. Underscoring the effort of the Motorsport department to save weight wherever possible, the new wheel/tyre combination saved 1 kg in spite of the increase in size, thanks to flow-formed wheel technology.

Larger front brake rotors, up from 330 mm to 350 mm, and 6-piston calipers increased pad-to-rotor contact by about 40%. As an option, Porsche Ceramic Composite Brakes (PCCB) with carbon-ceramic brake rotors was available for the first time in the GT3, taken from the 996-generation 911 GT2.

Porsche 911 GT3

Third generation of GT3
Based on the 997-generation of 911, a new GT3 was unveiled in 2006. Still powered by a 3.6-litre naturally-aspirated flat-6, the output was now 415 ps and the engine could spin at 8,400 rpm. The 6-speed transmission offered 15% shorter shift throws and a reduction of ratios for gears two through six, pairing well to power delivery of the engine.

To make full use of the increased power, the suspension was enhanced with divided control arms offering greater adjustment of camber angle. Additionally, Porsche Active Suspension Management (PASM) was offered as standard for the first time on the GT3, offering the capability of electronically adjusting the dampers. Wheel diameters grew to 19-inches, the size of the standard rear cast iron brake rotors increased to 350 mm, the optional PCCB rotors grew to 380 mm at the front axle, and Ultra-High Performance tyres (UHP) were mounted to further increase grip.

The 997 became the first 911 GT3 model to be equipped with a traction control system (TC), which complemented the standard limited slip differential by giving the driver greater control, particularly on slippery surfaces. The car was also fitted with a SPORT button for the first time, reducing backpressure in the exhaust and put the traction control system in a more dynamic mode.

Porsche 911 GT3

Larger engine, faster lap times
For the 2010 model year, the GT3 received not only a visual update as part of the facelifted 997 generation but also a number of significant technical changes. For the first time, the engine displacement was no longer 3.6 but 3.8 litres with 435 ps and 430 Nm of torque

This generation featured even more technology directly adopted from motorsport, such as the new centre lock hubs for the 19-inch wheels which increased driving performance with lower rotating masses. At the same time, electronic stability control (ESC) complemented the traction control system introduced on the previous model, adding another layer of control for the driver. An optional front axle lift system was introduced for the first time, offering an additional 30 mm of ride height at the front axle to clear driveways and speed bumps.

Porsche 911 GT3

The 991 generation GT3
Introduced in 2013 for the 2014 model year, the 911 GT3 based on the newly introduced 991-generation adopted one of the biggest advancements in performance and technology ever seen on a road car: the 7-speed Porsche dual-clutch transmission (PDK). It had already been available on the 911 Carrera and Turbo variants of the previous generation but was significantly modified to suit the characteristics of this race-bred model and fitted as standard.

The track performance of this latest GT3 also benefited from the new 991 platform. Track widths and body stiffness increased, PASM system advanced, and standard centre-lock wheels were made of forged aluminium for the first time while increasing to 20-inch diameter.

Rear axle steering was also added as standard for the first time on the GT3. This innovative technology, shared with the 918 Spyder and 911 Turbo, steered the rear wheels in opposite direction of the front wheels at speeds of up to 50 km/h to increase agility and reduce the turning circle. Over that speed, the system steered the rear wheels in tandem with the front wheels to promote stability, for example during a lane change at higher speeds.

Porsche 911 GT3

Today…
7:12.7 minutes: The lap time of the current GT3 represents roughly 45 seconds of improvement at the ‘Ring compared to the original model. What a world of difference! The new 4.0-litre engine develops 500 ps and a 470 Nm.

Catering to the purists, a 6-speed manual transmission was re-introduced as a no-cost alternative to the standard 7-speed PDK. This is also the exclusive transmission for the GT3 with Touring Package, which was first shown in September 2017.

More capable and diverse than ever before, the 911 GT3 represents the beating heart of Porsche’s commitment to building pure, uncompromised sportscars.

Click here for other news and articles about Porsche on PISTON.MY.

Visit www.porsche.com.my to know more about the models available in Malaysia.

PISTON.MY

Hari Raya Haji AND the school holidays are just around the corners which means a long weekend (which also means road trip!). To ensure that your journey remains as smooth as possible, here are some traffic predictions on what will most likely happen to Malaysians, courtesy of Waze. (more…)

With the 2019 Frankfurt Motorshow nearing, a number of carmakers are building up interest in their brands by releasing teaser images of new models that will debut at the event. The latest to do so is Hyundai Motor which will be unveiling the all-new i10 hatchback, besides a few other models.

The i10, a popular model in developing countries, joined the Hyundai range in 2007 and this new generation will be the third one, internally designated ‘LA’. The single sketch released shows a more dynamic design with a contrast between soft surfaces and sharp lines.

Gen 2 Hyundai i10
The second generation of the i10

Energetic, agile look for A-segment
The proportions for the all-new model have also been redefined, it appears, in width, height and wheel size, resulting in an energetic and agile look. This new design is expected to stand out in the A-segment.

The wide front grille expresses a sporty character and incorporates Daytime Running Lights, thus continuing this feature of the i10’s heritage. The triangular air curtains accentuate the width and stance of the car, as well as improving aerodynamics. The X-shaped C-pillar, visible from far away, clearly identifies the car and draws the eye to the pillar-mounted logo. Unique triangular volumes visually emphasise the width of the car and highlight the position of the wheels at the four corners.

Aiming to be recognised as a leader in its segment, the new i10 will feature a range of new Connected Car and safety features. Blue Link, Apple Car Play, Android Auto, wireless smartphone charging and a rearview camera are a few of them.

Extensive list of safety features
Depending on the market, the new i10 could have one of the most full-featured safety packages in its class. This will include Forward Collision-Avoidance Assist using a front radar sensor to detect not just cars but also pedestrians ahead. The car will also have Driver Attention Warning and Lane Keep Assist System as standard while High Beam Assist will be an optional feature.

Inokom i10
Inokom i10 assembled in Malaysia from 2008 till 2016.

The i10 was one of the first passenger car models to be assembled at the Inokom factory in Kedah. It was sold under the Inokom brand from 2008 and production continued until 2016.

Click here for other news and articles about Hyundai on PISTON.MY.

PISTON.MY

Car companies are pushing their boundaries when it comes to designing their versions of the ultimate hypercar. Many would think that the Italians, Germans, and even the Brits would be at the forefront (which they are) but there’s one fine example from Slovenia called the TS 900 H APEX that’s ready to bring theirs to the fight. (more…)

Last year, UMW Toyota Motor was the first Malaysian car company to be associated with the fast-growing Esports racing when it ran the inaugural TOYOTA GAZOO RACING (TGR) VELOCITY ESPORTS CHAMPIONSHIP. With the extremely strong response, the company has decided to run a second season this year which will take place between August 31 and September 15.

“We are very delighted with the overwhelming response from the public towards our very first TOYOTA GAZOO RACING Velocity Esports Championship last year, which was one of the largest Esports event in the country. We are confident that it will be more challenging this year, as more talented drivers would want to compete in the competition,” said Ravindran K., President of UMW Toyota Motor.

“Esports is a rapidly rising industry in Malaysia, as well as regionally and globally. It provides thrills and excitement of racing experience for the younger generation and Toyota’s involvement in this activity complements the dynamic and sporty side of the brand through the Toyota GAZOO Racing banner,” he added.

The high-performance activities of Toyota include the Toyota Gazoo Racing Festival (TGR Festival) which takes place 4 times a year at various locations around the country and enters its third season in 2019. Besides the TGR Festival and the Esports Championship, UMWT’s effort to establish a stronger presence in Malaysian motorsports will include the introduction of the GR Supra and GR Garage.

2018 Toyota GR Velocity Esports
Scenes from last year’s inaugural event

Toyota GR Velocity Esports Championship

Toyota GR Velocity Esports Championship

Two phases in championship
The TOYOTA GAZOO RACING (TGR) VELOCITY ESPORTS CHAMPIONSHIP is open to all Malaysians aged 18 and above. All participants will first go through a time-trial phase at Cove Esports in Bandar Sunway, Subang Jaya, Selangor on August 31/September 1 and September 14/15. The top 40 racers with the fastest lap times will then be eligible to enter the Grand Final event.

The Grand Final will be held at Pavilion Kuala Lumpur (Centre Court) on September 21/22 from 10 am to 9 pm. From the top 40 qualifiers who will challenge each other in the final round of races, one will be crowned as the Champion for 2019. This year, winners will share a bigger pool of prize money which totals RM70,000.

Toyota GR Supra
For those who don’t buy the real car which will be launched in Malaysia later this year. participating in this event will let them experience Toyota’s flagship sportscar.

The car: 2019 Toyota GR Supra
All participants will use the latest 2019 Toyota GR Supra, Toyota’s flagship sportscar developed not only for real motorsports but also for Gran Turismo Esport. This year, they will be racing around the Fuji Speedway in Japan, the famous 1.475-km long circuit with one of the longest straights in the world. The top 10 finalists will be competing head to head in a 10-lap race on a best-of-three tracks which are the Kyoto Driving Park, Suzuka Circuit as well as the Fuji Speedway.

Thrustmaster will supply its T-GT ultimate racing simulators. The racers will benefit from unique new technologies which allow them to experience the superior driving dynamics of the GR Supra and drive to the limits.

For information on the TOYOTA GAZOO RACING VELOCITY ESPORTS CHAMPIONSHIP and registration for participation, members of the public can visit ToyotaVelocity.com .

Click here for other news and articles about Toyota on  PISTON.MY.

PISTON.MY

Archive

Follow us on Facebook

Follow us on YouTube